Sway Bar 706001077 by Can-Am

Genuine Can-Am Sway Bar — OEM Part #706001077

Bring back the factory ride and handling with a genuine Can-Am Sway Bar. Built for the Outlander 400 or Outlander XT, it keeps the original geometry, bushing fit and travel, so the machine tracks straight and soaks up the trail.

A-arms, trailing arms, shocks, springs, sway bars, knuckles and bushings control wheel movement and alignment. Bent or worn parts cause wandering, uneven tire wear and harsh handling. This part is confirmed for 5 Can-Am models from 2011 to 2014. See the full fitment list below.

Sway Bar at a Glance

• OEM part number: 706001077
• Brand: Can-Am by BRP (genuine factory part)
• Part type: Sway Bar
• Fits: Outlander ATV models, 2011–2014
• Condition: New

Can-Am Models and Years This Sway Bar Fits

Genuine Can-Am part #706001077 fits the models and years below. To be certain, match the part number to the factory parts diagram for your machine or contact us with your VIN before ordering.

Can-Am Outlander ATV Fitment

Why Choose a Genuine Can-Am OEM Sway Bar?

• Factory geometry for straight tracking
• Correct bushing and ball joint fit
• Restores original ride height and travel
• Spreads loads across the frame as BRP designed
• Sold by Witchdoctors, with factory part numbers and parts diagrams for every Can-Am model we support

Features and Materials

Key Features

• Genuine Can-Am OEM suspension part, part #706001077
• Original mounting points and dimensions
• Corrosion-resistant coating where applicable
• Built for full-travel off-road use
• Works with factory bushings, ball joints and hardware

Materials and Construction

Can-Am suspension parts use high-strength steel for arms, knuckles and links with corrosion-resistant coatings, rubber or polymer bushings, and shocks with steel bodies, chromed shafts and oil or nitrogen damping.

Common Reasons Riders Replace This Part

• Replacing bent arms, knuckles or links after an impact
• Fixing clunks and wandering from worn bushings
• Restoring ride height and damping
• Rebuilding the suspension on a high-hour machine

Signs Your Sway Bar Needs Replacing

• Clunking or knocking over bumps
• Wandering, pulling or loose handling
• Uneven or rapid tire wear
• Visible bends, cracks or leaking shocks
• Play in ball joints or bushings

Installation Tips

1. Support the machine safely with the suspension unloaded.
2. Check the Can-Am parts diagram for bushings, ball joints and hardware.
3. Remove the damaged part and inspect the frame mounts.
4. Install, tightening pivot bolts at ride height if the manual specifies.
5. Torque all hardware, set toe, and recheck after the first ride.

Not sure whether to tackle it yourself? Read when to seek professional help or DIY before you start.

Related OEM Parts for the Same Machines

Doing the job right? These genuine Can-Am parts fit the same models and are often replaced at the same time:

• Can-Am A-Arm, Black (#706205905)
• Can-Am Shock Adjustment Wrench (#529000035)
• Can-Am Bushing (#706200181)
• Can-Am Sleeve (#706201587)
• Can-Am Grease Fitting (#408200700)
• Can-Am Adjuster Ring (#706002356)

Recommended Accessories and Maintenance Supplies

Pair your Sway Bar with these parts and supplies:

• Suspension components — A-arms, bushings and suspension parts
• UTV and ATV shocks — Replacement and performance shocks
• A-arm bushings — Bushings for arms
• Ball joints — Upper and lower ball joints
• Can-Am OEM parts diagrams — find every factory part for your model

Helpful Guides from the Witchdoctors Blog

• Aftermarket UTV Ball Joints: Greasable vs. Rebuildable Guide
• What Is the Difference Between a Shock and Strut?
• Buyer's Guide to UTV Sway Bars and Sway Bar Links
• Can-Am OEM vs. Aftermarket Parts: Which Is Better?

Frequently Asked Questions

What is the OEM part number for this Can-Am Sway Bar?

The genuine Can-Am part number is 706001077. Use it to match this part to your factory parts diagram.

Which Can-Am models does part #706001077 fit?

It fits the Outlander 400 EFI (2011); Outlander 400 EFI XT (2012–2014); Outlander MAX 400 EFI (2011, 2014); Outlander MAX 400 EFI XT (2014); Outlander MAX XT 400 EFI (2012–2013).

Is this a genuine Can-Am part?

Yes. This is a genuine Can-Am OEM part from BRP, the same part number used at the factory, not an aftermarket copy.

Do I need an alignment after replacing suspension parts?

Yes, check and set toe after installation.

Should I replace both sides?

For wear items like bushings and shocks, replace in pairs to keep handling balanced.

Is OEM better than aftermarket suspension?

OEM restores factory ride and geometry. Aftermarket arms may add strength or travel but often change geometry.

Order Your Genuine Can-Am Sway Bar Today

Ride with confidence on parts built for your machine. Order the genuine Can-Am Sway Bar, OEM part #706001077, from Witchdoctors today and keep your Outlander 400 or Outlander XT running the way BRP designed it.

• How long will it take to receive my order?
• Shipping and return policy
• Questions about fitment? Contact us
• Shop all Can-Am OEM parts

Where to Ride Your Can-Am

Ready to put your machine to work? These off-road parks welcome both ATVs and UTVs. Check each park's current rules, vehicle-width limits and permit requirements before you go.

• Black Rock Adventure Park — Conneaut, Ohio: about 50 miles of trails
• Sand Mountain Recreation Area — Fallon, Nevada: about 4,800 acres of dunes