Swing Arm Seal Cover A52426156000 by Can-Am

Genuine Can-Am Swing Arm Seal Cover — OEM Part #A52426156000

Rocks, stumps and ledges take a toll on the underside and front end of any machine. The genuine Can-Am Swing Arm Seal Cover restores factory protection on your Renegade models, bolting to the original mounting points so it takes hits the way BRP engineered it to.

Bumpers, skid plates and guards are the first line of defense. They spread out impacts that would otherwise bend frame rails, crack cases or damage suspension parts. This part is confirmed for 7 Can-Am models from 2023 to 2026. See the full fitment list below.

Swing Arm Seal Cover at a Glance

• OEM part number: A52426156000
• Brand: Can-Am by BRP (genuine factory part)
• Part type: Swingarm Guard
• Note: Front
• Fits: Renegade sport ATV models, 2023–2026
• Condition: New

Can-Am Models and Years This Swing Arm Seal Cover Fits

Genuine Can-Am part #A52426156000 fits the models and years below. To be certain, match the part number to the factory parts diagram for your machine or contact us with your VIN before ordering.

Can-Am Renegade sport ATV Fitment

Why Choose a Genuine Can-Am OEM Swing Arm Seal Cover?

• Bolts to factory mounting points, with no drilling
• Shields expensive parts from rocks, stumps and debris
• Works with the factory frame and ground clearance
• Costs far less than repairing the parts it protects
• Sold by Witchdoctors, with factory part numbers and parts diagrams for every Can-Am model we support

Features and Materials

Key Features

• Genuine Can-Am OEM protection part, part #A52426156000
• Designed around the original frame and suspension geometry
• Corrosion-resistant finish for wet and muddy conditions
• Uses factory hardware locations
• Built for repeated trail impacts

Materials and Construction

Can-Am protection parts are typically steel tube, stamped steel, aluminum or high-density polyethylene (HDPE), depending on location, finished to resist corrosion from mud, water and road salt.

Common Reasons Riders Replace This Part

• Rock crawling and technical trails
• Farm and ranch work around brush, posts and stumps
• Replacing a bent bumper or cracked skid plate
• Restoring factory protection on a used machine

Signs Your Swing Arm Seal Cover Needs Replacing

• Bent, cracked or torn bumpers, plates or guards
• Missing or loose mounting hardware
• Deep gouges that weaken the part
• Rust-through on steel parts
• Damage to the components behind the guard

Installation Tips

1. Support the machine safely on stands if working underneath.
2. Use the Can-Am parts diagram to identify every bolt and bracket.
3. Remove the damaged part and check the frame mounts for cracks or bends.
4. Install with fresh hardware where needed and thread locker if the manual calls for it.
5. Torque to spec and recheck after your first ride.

Not sure whether to tackle it yourself? Read when to seek professional help or DIY before you start.

Can-Am Parts Diagrams for Your Machine

Find part #A52426156000 and every part installed with it in the factory Can-Am parts diagrams for your model:

• 2026 Can-Am Renegade 70 EFI Carb parts diagrams
• 2026 Can-Am Renegade 110 EFI Carb parts diagrams
• 2023 Can-Am Renegade 70 EFI Epa parts diagrams
• 2023 Can-Am Renegade 110 EFI Epa parts diagrams

Related OEM Parts for the Same Machines

Doing the job right? These genuine Can-Am parts fit the same models and are often replaced at the same time:

• Can-Am Front Bumper, Legion Red (#A50450T91487)
• Can-Am Front Bumper, Neo Yellow (#A50450T91450)

Recommended Accessories and Maintenance Supplies

Pair your Swing Arm Seal Cover with these parts and supplies:

• UTV front and rear bumpers — Bumpers for added protection
• Rock sliders and skid plates — Underbody and rocker protection
• UTV grille guards — Front-end protection
• UTV winches — Recovery winches
• Can-Am OEM parts diagrams — find every factory part for your model

Helpful Guides from the Witchdoctors Blog

• OEM Brush Guard VS Bumper: UTV/ATV Armor Compared
• Ultimate Buyer’s Guide: UTV & ATV Skid Plates & A-Arm Guards
• The Ultimate UTV Rock Sliders Buying Guide
• Can-Am OEM vs. Aftermarket Parts: Which Is Better?

Frequently Asked Questions

What is the OEM part number for this Can-Am Swing Arm Seal Cover?

The genuine Can-Am part number is A52426156000. Use it to match this part to your factory parts diagram. Note: front.

Which Can-Am models does part #A52426156000 fit?

It fits 7 Can-Am Renegade models from 2023 to 2026. The complete list is in the fitment tables above.

Is this a genuine Can-Am part?

Yes. This is a genuine Can-Am OEM part from BRP, the same part number used at the factory, not an aftermarket copy.

Is this as strong as aftermarket armor?

It is built to BRP's factory standard for the listed models. Aftermarket armor may be heavier, but the OEM part fits the factory mounts exactly and keeps the original weight and clearance.

Can I mount a winch with this part?

Only if the Can-Am parts diagram shows a winch mount for your model. Otherwise use the dedicated winch mount.

Should I replace the hardware too?

Hardware that has taken a hard hit can stretch or bend. Replace damaged bolts and use fresh thread locker.

Order Your Genuine Can-Am Swing Arm Seal Cover Today

Get your Renegade models back to factory condition. Add the genuine Can-Am Swing Arm Seal Cover (part #A52426156000) to your cart today, and order the related parts above at the same time so you can finish the job in one go.

• How long will it take to receive my order?
• Shipping and return policy
• Questions about fitment? Contact us
• Shop all Can-Am OEM parts

Where to Ride Your Can-Am

Ready to put your machine to work? These off-road parks welcome both ATVs and UTVs. Check each park's current rules, vehicle-width limits and permit requirements before you go.

• The Mounds ORV Park — Mt. Morris, Michigan: a 370-acre park open year-round
• Hidden Falls Adventure Park — Marble Falls, Texas: about 240 miles of trails on 3,000 acres