Genuine Kawasaki Tank Cap — OEM Part #51049-2087
Get reliable starts and steady power back with a genuine Kawasaki Tank Cap. Built for the Mule 3010 or Mule 4010, it matches the original connections and specifications, so fuel delivery stays where the factory calibration expects it.
Tanks, pumps, injectors, carburetors, lines and emissions parts must deliver clean fuel at the right pressure and keep vapors sealed. A small leak or weak part affects starting, power and safety. This part is confirmed for 6 Kawasaki models from 2005 to 2013. See the full fitment list below.
Tank Cap at a Glance
-
OEM part number: 51049-2087
-
Brand: Kawasaki (genuine factory part)
-
Part type: Fuel Tank & Components
-
Fits: Mule utility side-by-side models, 2005–2013
-
Condition: New
Kawasaki Models and Years This Tank Cap Fits
Genuine Kawasaki part #51049-2087 fits the models and years below. To be certain, match the part number to the factory parts diagram for your machine or contact us with your VIN before ordering.
Kawasaki Mule utility side-by-side Fitment
| Model |
Model Years |
| Kawasaki Mule 3010 Trans 4x4 |
2005 and earlier (2005, 2007–2008) |
| Kawasaki Mule 3010 Trans 4x4 Diesel |
2008 |
| Kawasaki Mule 3010 Trans 4x4l |
2006 |
| Kawasaki Mule 4010 4x4 Diesel |
2010–2012 |
| Kawasaki Mule 4010 Diesel 4x4 |
2009, 2013 |
| Kawasaki Mule 4010 Trans 4x4 Diesel |
2009–2013 |
Why Choose a Genuine Kawasaki OEM Tank Cap?
- Correct fit with factory fittings and connectors
- Maintains the fuel delivery your engine is calibrated for
- Fuel- and ethanol-resistant materials
- Helps keep emissions and vapor systems compliant
- Sold by Witchdoctors, with factory part numbers and parts diagrams for every Kawasaki model we support
Features and Materials
Key Features
- Genuine Kawasaki OEM fuel part, part #51049-2087
- Original line sizes, connectors, jets and mounting
- Built for gasoline and ethanol-blend exposure
- Designed for the listed Kawasaki models
- Works with factory fuel injection, carburetor and EVAP systems
Materials and Construction
Kawasaki fuel parts use ethanol-resistant hose and seals, polyethylene or steel tanks, corrosion-resistant pump, injector and carburetor parts, and fittings that seal under vibration.
Common Reasons Owners Replace This Part
- Fixing hard starting, stalling or hesitation
- Repairing fuel leaks or fuel smell
- Replacing parts damaged by stale or bad fuel
- Restoring emissions and EVAP parts
Signs Your Tank Cap Needs Replacing
- Hard starting or long cranking
- Stalling, surging or hesitation under load
- Fuel smell or visible leaks
- Check engine light tied to fuel or EVAP (fuel-injected models)
- Cracked lines, fittings or tank parts
Installation Tips
- Work in a ventilated area away from sparks and relieve fuel pressure first on fuel-injected models.
- Disconnect the battery before working on pumps or wiring.
- Use the Kawasaki parts diagram to confirm routing, clamps and O-rings.
- Install with fresh seals and secure every clamp and connector.
- Check for leaks before starting the engine.
Not sure whether to tackle it yourself? Read when to seek professional help or DIY before you start.
Related OEM Parts for the Same Machines
Doing the job right? These genuine Kawasaki parts fit the same models and are often replaced at the same time:
Recommended Accessories and Maintenance Supplies
Pair your Tank Cap with these parts and supplies:
Helpful Guides from the Witchdoctors Blog
Frequently Asked Questions
What is the OEM part number for this Kawasaki Tank Cap?
The genuine Kawasaki part number is 51049-2087. Use it to match this part to your factory parts diagram.
Which Kawasaki models does part #51049-2087 fit?
It fits the Mule 3010 Trans 4x4 (2005 and earlier (2005, 2007–2008)); Mule 3010 Trans 4x4 Diesel (2008); Mule 3010 Trans 4x4l (2006); Mule 4010 4x4 Diesel (2010–2012); Mule 4010 Diesel 4x4 (2009, 2013); Mule 4010 Trans 4x4 Diesel (2009–2013).
Is this a genuine Kawasaki part?
Yes. This is a genuine Kawasaki OEM part, the same part number used at the factory, not an aftermarket copy.
Can ethanol fuel damage my fuel system?
Ethanol blends attract moisture and can degrade older parts, especially carburetors. Follow your owner's manual for recommended fuel.
Should I replace the fuel filter too?
If your model has a serviceable filter, replacing it during fuel work is a good idea.
Why does it run poorly after sitting?
Stale fuel can varnish carburetor jets, injectors and pumps. Use stabilizer for storage and drain old fuel.
Order Your Genuine Kawasaki Tank Cap Today
Work and ride with confidence on parts built for your machine. Order the genuine Kawasaki Tank Cap, OEM part #51049-2087, from Witchdoctors today and keep your Mule 3010 or Mule 4010 running the way Kawasaki designed it.
Where to Ride Your Kawasaki
Ready to put your machine to work? These off-road parks welcome both ATVs and UTVs. Check each park's current rules, vehicle-width limits and permit requirements before you go.