Tank Support 705602201 by Can-Am

Genuine Can-Am Tank Support — OEM Part #705602201

Stop with confidence with a genuine Can-Am Tank Support. Built for the Defender HD11 or Traxter HD11, it fits the factory calipers, lines and mounts, so pedal or lever feel and stopping power return to factory standard.

Lines, calipers, master cylinders, pads, rotors and parking brakes work as one hydraulic and mechanical system. A leak, worn part or wrong fitting leads to a soft pedal or brake failure. This part is confirmed for 12 Can-Am models from 2026. See the full fitment list below.

Tank Support at a Glance

• OEM part number: 705602201
• Brand: Can-Am by BRP (genuine factory part)
• Part type: Master Cylinders & Components
• Fits: Defender utility side-by-side and Traxter utility side-by-side models, 2026
• Condition: New

Can-Am Models and Years This Tank Support Fits

Genuine Can-Am part #705602201 fits the models and years below. To be certain, match the part number to the factory parts diagram for your machine or contact us with your VIN before ordering.

Can-Am Defender utility side-by-side Fitment

Can-Am Traxter utility side-by-side Fitment

Why Choose a Genuine Can-Am OEM Tank Support?

• Factory hydraulic specification for proper feel
• Direct fit with original calipers, lines and mounts
• Built for the heat and contamination of off-road braking
• Restores safe, predictable stopping
• Sold by Witchdoctors, with factory part numbers and parts diagrams for every Can-Am model we support

Features and Materials

Key Features

• Genuine Can-Am OEM brake part, part #705602201
• Original fittings, banjo bolts and mounting points
• Built to BRP's brake system specification
• Designed for mud, water and steep terrain
• Works with the DOT fluid specified in your manual

Materials and Construction

Can-Am brake parts use reinforced brake hose, steel lines and fittings, aluminum caliper and master-cylinder bodies with DOT-compatible seals, and steel rotors and friction pads designed for off-road use.

Common Reasons Riders Replace This Part

• Fixing a soft, spongy or sinking pedal
• Replacing leaking lines, calipers or master cylinders
• Replacing worn pads and rotors
• Restoring a parking brake that will not hold

Signs Your Tank Support Needs Replacing

• Spongy pedal or lever, or one that sinks
• Brake fluid leaks
• Grinding, squealing or pulling to one side
• Scored, warped or thin rotors
• A parking brake that will not hold on a slope

Installation Tips

1. Use the Can-Am parts diagram to confirm fittings, crush washers and routing.
2. Protect painted surfaces from fluid and cap open lines.
3. Install with new crush washers on banjo fittings and torque to spec.
4. Refill with fresh DOT fluid of the specified type and bleed fully.
5. Test brake feel and function at low speed before riding normally.

Not sure whether to tackle it yourself? Read when to seek professional help or DIY before you start.

Can-Am Parts Diagrams for Your Machine

Find part #705602201 and every part installed with it in the factory Can-Am parts diagrams for your model:

• 2026 Can-Am Defender HD11 LTD Cab parts diagrams
• 2026 Can-Am Defender HD11 X mr parts diagrams
• 2026 Can-Am Defender HD11 XT parts diagrams
• 2026 Can-Am Defender HD11 XT Cab parts diagrams

Related OEM Parts for the Same Machines

Doing the job right? These genuine Can-Am parts fit the same models and are often replaced at the same time:

• Can-Am Front Brake Caliper Hose (#705602100)
• Can-Am Front Brake Caliper, Left (#705602220)
• Can-Am Open Clamp (#515175507)
• Can-Am Banjo Bolt (#705600609)
• Can-Am Brake Switch (#705601250)
• Can-Am Front Brake Rotor (#705602082)

Recommended Accessories and Maintenance Supplies

Pair your Tank Support with these parts and supplies:

• UTV brake pads and rotors — Pads, rotors and parking brake parts
• UTV brake lines — Replacement and braided lines
• EBC brakes — EBC pads and rotors
• Brake cleaner and penetrating oil — Cleaners for brake service
• Can-Am OEM parts diagrams — find every factory part for your model

Helpful Guides from the Witchdoctors Blog

• Do You Need to Change Rotors with Brake Pads on a UTV?
• Do Braided Brake Lines Firm Up a UTV or ATV Pedal?
• Signs of a Bad ATV/UTV Master Cylinder & Testing Guide
• Can-Am OEM vs. Aftermarket Parts: Which Is Better?

Frequently Asked Questions

What is the OEM part number for this Can-Am Tank Support?

The genuine Can-Am part number is 705602201. Use it to match this part to your factory parts diagram.

Which Can-Am models does part #705602201 fit?

It fits 12 Can-Am Defender and Traxter models from 2026 to 2026. The complete list is in the fitment tables above.

Is this a genuine Can-Am part?

Yes. This is a genuine Can-Am OEM part from BRP, the same part number used at the factory, not an aftermarket copy.

What brake fluid should I use?

Use the DOT type in your Can-Am operator's guide or on the reservoir cap. Never mix DOT 5 silicone with DOT 3, 4 or 5.1.

Do I need to bleed the brakes?

Yes, any time the hydraulic system is opened.

Should I replace rotors with pads?

Not always. Measure thickness and check for scoring or warping against the minimum spec.

Order Your Genuine Can-Am Tank Support Today

Ride with confidence on parts built for your machine. Order the genuine Can-Am Tank Support, OEM part #705602201, from Witchdoctors today and keep your Defender HD11 or Traxter HD11 running the way BRP designed it.

• How long will it take to receive my order?
• Shipping and return policy
• Questions about fitment? Contact us
• Shop all Can-Am OEM parts

Where to Ride Your Can-Am

Ready to put your machine to work? These off-road parks welcome both ATVs and UTVs. Check each park's current rules, vehicle-width limits and permit requirements before you go.

• Hollister Hills SVRA — Hollister, California: a state vehicular recreation area with designated ATV and 4x4 areas
• Anthracite Outdoor Adventure Area (AOAA) — Shamokin, Pennsylvania: about 200 miles of trails in former coal country