Genuine Kawasaki Tapping Screw 5X16 — OEM Part #92172-0175
Small parts hold big things together. The genuine Kawasaki Tapping Screw 5X16 is the exact factory fastener specified for your Brute Force 750 or Ridge, with the correct size, thread, length, grade and finish, so it fits right and holds torque.
OEM hardware is engineered for a specific location and load. The wrong grade, length or thread can strip threads, loosen under vibration or let critical parts shift. This part is confirmed for 21 Kawasaki models from 2008 to 2026. See the full fitment list below.
Tapping Screw 5X16 at a Glance
-
OEM part number: 92172-0175
-
Brand: Kawasaki (genuine factory part)
-
Part type: Pedals & Components
-
Fits: Brute Force ATV and Ridge ranch side-by-side models, 2008–2026
-
Condition: New
Kawasaki Models and Years This Tapping Screw 5X16 Fits
Genuine Kawasaki part #92172-0175 fits the models and years below. To be certain, match the part number to the factory parts diagram for your machine or contact us with your VIN before ordering.
Kawasaki Brute Force ATV Fitment
| Model |
Model Years |
| Kawasaki Brute Force 750 4x4i |
2008–2011 |
| Kawasaki Brute Force 750 4x4i Hardwoods Green HD |
2008–2009 |
| Kawasaki Brute Force 750 4x4i NRA Outdoors |
2008–2009 |
| Kawasaki Brute Force 750 4x4i Realtree APG HD |
2010 |
Kawasaki Ridge ranch side-by-side Fitment
| Model |
Model Years |
| Kawasaki Ridge |
2026 |
| Kawasaki Ridge Crew |
2026 |
| Kawasaki Ridge Crew HVAC |
2025–2026 |
| Kawasaki Ridge Crew HVAC Camo |
2025–2026 |
| Kawasaki Ridge Crew Platinum Ranch Edition HVAC |
2026 |
| Kawasaki Ridge Crew ST HVAC |
2026 |
| Kawasaki Ridge HVAC |
2024–2026 |
| Kawasaki Ridge HVAC Camo |
2025–2026 |
| Kawasaki Ridge Limited |
2024–2025 |
| Kawasaki Ridge Limited HVAC |
2024–2025 |
| Kawasaki Ridge Platinum Ranch Edition HVAC |
2026 |
| Kawasaki Ridge Ranch Edition |
2024–2025 |
| Kawasaki Ridge ST HVAC |
2026 |
| Kawasaki Ridge XR Crew |
2025 |
| Kawasaki Ridge XR Crew HVAC |
2025 |
| Kawasaki Ridge XR Deluxe HVAC |
2025 |
| Kawasaki Ridge XR HVAC |
2024–2025 |
Why Choose a Genuine Kawasaki OEM Tapping Screw 5X16?
- Exact factory size, thread pitch and length
- Correct strength grade for its location
- Factory corrosion-resistant finish
- No guessing at metric sizes or grades
- Sold by Witchdoctors, with factory part numbers and parts diagrams for every Kawasaki model we support
Features and Materials
Key Features
- Genuine Kawasaki OEM hardware, part #92172-0175
- Matches the original thread, length, head style and grade
- Plated or coated to resist corrosion (where applicable)
- Used across several Kawasaki assemblies, as listed in the fitment table
- Ideal for replacing lost, stripped or one-time-use fasteners
Materials and Construction
Kawasaki fasteners are heat-treated alloy or carbon steel, or stainless steel where corrosion resistance matters most, with zinc or similar plating. Washers, clips and bushings are steel, spring steel, nylon or rubber depending on the job.
Common Reasons Owners Replace This Part
- Replacing hardware lost on the trail
- Replacing stretched, rusted or stripped fasteners
- Rebuilds that call for new one-time-use hardware
- Keeping spares for common repairs
Signs Your Tapping Screw 5X16 Needs Replacing
- Rounded heads or damaged threads
- Rust that weakens the fastener
- Missing hardware that leaves a part loose
- Bolts that will not hold torque
- Self-locking nuts or one-time bolts that were already reused
Installation Tips
- Check the Kawasaki parts diagram for the location and quantity you need.
- Clean the threads in the mating part, chasing damaged threads with a tap if needed.
- Apply thread locker or anti-seize only where the service manual specifies.
- Start the fastener by hand to avoid cross-threading.
- Tighten to the factory torque spec with a calibrated torque wrench.
Not sure whether to tackle it yourself? Read when to seek professional help or DIY before you start.
Kawasaki Parts Diagrams for Your Machine
Find part #92172-0175 and every part installed with it in the factory Kawasaki parts diagrams for your model:
Related OEM Parts for the Same Machines
Doing the job right? These genuine Kawasaki parts fit the same models and are often replaced at the same time:
Recommended Accessories and Maintenance Supplies
Pair your Tapping Screw 5X16 with these parts and supplies:
Helpful Guides from the Witchdoctors Blog
Frequently Asked Questions
What is the OEM part number for this Kawasaki Tapping Screw 5X16?
The genuine Kawasaki part number is 92172-0175. Use it to match this part to your factory parts diagram.
Which Kawasaki models does part #92172-0175 fit?
It fits 21 Kawasaki Brute Force and Ridge models from 2008 to 2026. The complete list is in the fitment tables above.
Is this a genuine Kawasaki part?
Yes. This is a genuine Kawasaki OEM part, the same part number used at the factory, not an aftermarket copy.
Can I use a hardware-store bolt instead?
It may look the same, but grade, pitch, length and finish often differ. For suspension, brakes or engine parts, use the specified OEM fastener.
Is this sold individually?
This listing is for the part number shown. Check the parts diagram for the quantity at each location.
Should I reuse self-locking nuts?
No. Self-locking and torque-to-yield fasteners are designed for one use.
Order Your Genuine Kawasaki Tapping Screw 5X16 Today
Get your Brute Force 750 or Ridge back to factory condition. Add the genuine Kawasaki Tapping Screw 5X16 (part #92172-0175) to your cart today, and order the related parts above at the same time so you can finish the job in one go.
Where to Ride Your Kawasaki
Ready to put your machine to work? These off-road parks welcome both ATVs and UTVs. Check each park's current rules, vehicle-width limits and permit requirements before you go.