Genuine Yamaha Thermostat — OEM Part #1XD-12411-01-00
Keep your Yamaha ATV or side-by-side running cool under load with a genuine Yamaha Thermostat. It connects to the original hoses, mounts and wiring, so you get the factory cooling performance Yamaha engineered for hot days, slow crawling and heavy work.
The radiator, water pump, fan, thermostat, hoses and reservoir work together to hold engine temperature steady. If one part fails, the whole system suffers. This part is confirmed for 43 Yamaha models from 2014 to 2027. See the full fitment list below.
Thermostat at a Glance
-
OEM part number: 1XD-12411-01-00
-
Brand: Yamaha (genuine factory part)
-
Part type: Thermostats & Components
-
Fits: Grizzly utility ATV, Kodiak utility ATV and Viking utility side-by-side models, 2014–2027
-
Condition: New
Yamaha Models and Years This Thermostat Fits
Genuine Yamaha part #1XD-12411-01-00 fits the models and years below. To be certain, match the part number to the factory parts diagram for your machine or contact us with your VIN before ordering.
This part is shared across 43 Yamaha model variants, so the table below groups them by model family. Your exact trim is listed in the parts diagrams linked further down.
Yamaha Grizzly utility ATV Fitment
| Model Family |
Model Years |
Trims |
| Yamaha Grizzly 700 |
2019–2027 |
7 |
Yamaha Kodiak utility ATV Fitment
| Model Family |
Model Years |
Trims |
| Yamaha Kodiak 700 |
2019–2027 |
10 |
Yamaha Viking utility side-by-side Fitment
| Model Family |
Model Years |
Trims |
| Yamaha Viking |
2014–2026 |
15 |
| Yamaha Viking VI |
2015–2025 |
11 |
Why Choose a Genuine Yamaha OEM Thermostat?
- Factory flow and capacity for your engine
- Direct-fit connections with no adapters
- Heat- and pressure-resistant construction
- Helps prevent overheating and head gasket failure
- Sold by Witchdoctors, with factory part numbers and parts diagrams for every Yamaha model we support
Features and Materials
Key Features
- Genuine Yamaha OEM cooling part, part #1XD-12411-01-00
- Original hose sizes, mounts and connectors
- Built for the pressure and temperature of the listed engines
- Designed for mud, dust and debris
- Works with Yamaha-approved coolant
Materials and Construction
Yamaha cooling parts use aluminum radiator cores, reinforced rubber hoses rated for hot coolant under pressure, glass-reinforced plastic housings and steel or stainless clamps.
Common Reasons Riders Replace This Part
- Fixing coolant leaks and overheating
- Replacing parts damaged by mud packing or debris
- Preventive replacement of aging hoses and seals
- Restoring cooling after an engine rebuild
Signs Your Thermostat Needs Replacing
- Temperature warning or rising gauge
- Coolant leaks or a sweet smell after riding
- A fan that does not run or makes noise
- Cracked, swollen or soft hoses
- Coolant bubbling or boiling over in the reservoir
Installation Tips
- Let the engine cool completely before opening the system.
- Drain coolant into a container and dispose of it properly.
- Install the new part with fresh clamps, gaskets and O-rings where specified.
- Refill with the coolant in your Yamaha manual and bleed air from the system.
- Run to operating temperature, check for leaks and top up the reservoir.
Not sure whether to tackle it yourself? Read when to seek professional help or DIY before you start.
Yamaha Parts Diagrams for Your Machine
Find part #1XD-12411-01-00 and every part installed with it in the factory Yamaha parts diagrams for your model:
Related OEM Parts for the Same Machines
Doing the job right? These genuine Yamaha parts fit the same models and are often replaced at the same time:
Recommended Accessories and Maintenance Supplies
Pair your Thermostat with these parts and supplies:
Helpful Guides from the Witchdoctors Blog
Frequently Asked Questions
What is the OEM part number for this Yamaha Thermostat?
The genuine Yamaha part number is 1XD-12411-01-00. Use it to match this part to your factory parts diagram.
Which Yamaha models does part #1XD-12411-01-00 fit?
It fits 43 Yamaha Grizzly, Kodiak and Viking models from 2014 to 2027. The complete list is in the fitment tables above.
Is this a genuine Yamaha part?
Yes. This is a genuine Yamaha OEM part, the same part number used at the factory, not an aftermarket copy.
What coolant should I use?
Use the coolant type and mix in your Yamaha owner's manual. Mixing coolant types can cause gelling or corrosion.
Do I need to bleed the cooling system?
Yes. Trapped air causes hot spots and overheating. Follow the procedure for your model.
Why does my machine overheat in mud?
Mud packed in the radiator fins blocks airflow. Clean the radiator regularly from the back side with low-pressure water.
Order Your Genuine Yamaha Thermostat Today
Ride with confidence on parts built for your machine. Order the genuine Yamaha Thermostat, OEM part #1XD-12411-01-00, from Witchdoctors today and keep your Yamaha ATV or side-by-side running the way Yamaha designed it.
Where to Ride Your Yamaha
Ready to put your machine to work? These off-road parks welcome both ATVs and UTVs. Check each park's current rules, vehicle-width limits and permit requirements before you go.