Genuine Polaris Throttle Pivot Block — OEM Part #5434327
Get crisp, predictable control back with a genuine Polaris Throttle Pivot Block. Built for the Polaris ATV or side-by-side, it fits the original pivots, brackets and connectors.
Pedals, levers, cables, throttles and hand controls translate your input into action. Worn or sticky parts make the machine harder and less safe to operate. This part is confirmed for 45 Polaris models from 1999 to 2014. See the full fitment list below.
Throttle Pivot Block at a Glance
-
OEM part number: 5434327
-
Brand: Polaris (genuine factory part)
-
Part type: Pedals & Components
-
Fits: Ranger utility side-by-side and Series 10/11 ATV models, 1999–2014
-
Condition: New
Polaris Models and Years This Throttle Pivot Block Fits
Genuine Polaris part #5434327 fits the models and years below. To be certain, match the part number to the factory parts diagram for your machine or contact us with your VIN before ordering.
This part is shared across 45 Polaris model variants, so the table below groups them by model family. Your exact trim is listed in the parts diagrams linked further down.
Polaris Ranger utility side-by-side Fitment
| Model Family |
Model Years |
Trims |
| Polaris Ranger |
1999, 2003, 2008–2009 |
3 |
| Polaris Ranger 2x4 |
2004–2005, 2008–2009 |
2 |
| Polaris Ranger 4x4 |
2004–2005, 2007–2008 |
3 |
| Polaris Ranger 6x6 |
2004–2009 |
2 |
| Polaris Ranger 400 |
2010–2014 |
5 |
| Polaris Ranger 500 |
2003, 2006–2008, 2011–2013 |
14 |
| Polaris Ranger 700 |
2006–2009 |
5 |
| Polaris Ranger 800 |
2013–2014 |
2 |
| Polaris Ranger Tm |
2004–2006 |
1 |
| Polaris Ranger XP |
2005–2006 |
3 |
Polaris Series 10/11 ATV Fitment
| Model Family |
Model Years |
Trims |
| Polaris Series 10 |
2003 |
2 |
| Polaris Series 11 |
2003 |
3 |
Why Choose a Genuine Polaris OEM Throttle Pivot Block?
- Factory feel, travel and return
- Direct fit with original brackets and connectors
- Built for mud, water and cold
- Restores safe, predictable control
- Sold by Witchdoctors, with factory part numbers and parts diagrams for every Polaris model we support
Features and Materials
Key Features
- Genuine Polaris OEM control part, part #5434327
- Original mounting and adjustment
- Corrosion- and wear-resistant construction
- Designed for the listed Polaris models
- Works with factory cables, sensors and switches
Materials and Construction
Polaris control parts use steel or aluminum pedals and levers, lined and sealed cables, durable polymer bushings and grips, and sealed sensors for electronic throttles.
Common Reasons Riders Replace This Part
- Fixing sticky, binding or broken controls
- Replacing stretched or frayed cables
- Replacing bent or snapped levers and pedals
- Restoring throttle response and idle return
Signs Your Throttle Pivot Block Needs Replacing
- Throttle that sticks or will not return
- Stretched, frayed or binding cables
- Bent or broken levers and pedals
- Excess free play
- Warnings tied to the throttle sensor
Installation Tips
- Use the Polaris parts diagram for routing, clips and adjusters.
- Route new cables exactly like the originals.
- Set free play to the service manual spec.
- Check full throttle return at full steering lock both ways.
- Test at low speed before riding normally.
Not sure whether to tackle it yourself? Read when to seek professional help or DIY before you start.
Related OEM Parts for the Same Machines
Doing the job right? These genuine Polaris parts fit the same models and are often replaced at the same time:
Recommended Accessories and Maintenance Supplies
Pair your Throttle Pivot Block with these parts and supplies:
Helpful Guides from the Witchdoctors Blog
Frequently Asked Questions
What is the OEM part number for this Polaris Throttle Pivot Block?
The genuine Polaris part number is 5434327. Use it to match this part to your factory parts diagram.
Which Polaris models does part #5434327 fit?
It fits 45 Polaris Ranger and Series models from 1999 to 2014. The complete list is in the fitment tables above.
Is this a genuine Polaris part?
Yes. This is a genuine Polaris OEM part, the same part number used at the factory, not an aftermarket copy.
How do I adjust cable free play?
Use the adjuster at the lever, pedal or engine end and set it to the manual spec.
Why does my throttle stick?
Dirt in the cable, a kinked cable or a sticking throttle body. Replace damaged cables.
Are grips and hand guards model-specific?
Many are. Use the fitment table to confirm.
Order Your Genuine Polaris Throttle Pivot Block Today
Ride with confidence on parts built for your machine. Order the genuine Polaris Throttle Pivot Block, OEM part #5434327, from Witchdoctors today and keep your Polaris ATV or side-by-side running the way Polaris designed it.
Where to Ride Your Polaris
Ready to put your machine to work? These off-road parks welcome both ATVs and UTVs. Check each park's current rules, vehicle-width limits and permit requirements before you go.