Traxer Decal 704909791 by Can-Am

Genuine Can-Am Traxer Decal — OEM Part #704909791

Bring back the factory finish on your Traxter HD10 XT (Europe) with a genuine Can-Am Traxer Decal. Faded, peeled or torn graphics make a machine look older than it is and can hurt resale value, and this OEM decal matches the original color, shape and placement exactly.

Decals and labels do more than look good. Model graphics identify your machine, and warning labels carry safety and loading information that must stay legible. This part is confirmed for 1 Can-Am model from 2024. See the full fitment list below.

Traxer Decal at a Glance

• OEM part number: 704909791
• Brand: Can-Am by BRP (genuine factory part)
• Part type: OEM Decal
• Fits: Traxter utility side-by-side models, 2024
• Condition: New

Can-Am Models and Years This Traxer Decal Fits

Genuine Can-Am part #704909791 fits the models and years below. To be certain, match the part number to the factory parts diagram for your machine or contact us with your VIN before ordering.

Can-Am Traxter utility side-by-side Fitment

Why Choose a Genuine Can-Am OEM Traxer Decal?

• Exact factory color match, so it blends with the graphics around it
• Pre-cut to the original outline, with no trimming
• Correct placement for the specific panel it was designed for
• Keeps your machine looking original, which helps at resale or trade-in
• Sold by Witchdoctors, with factory part numbers and parts diagrams for every Can-Am model we support

Features and Materials

Key Features

• Genuine Can-Am OEM graphic, part #704909791
• UV-resistant inks made for outdoor powersports use
• Pressure-sensitive adhesive backing for a clean, bubble-free bond
• Sized and shaped for the original panel location
• Ready to apply. No paint, primer or special tools needed

Materials and Construction

Can-Am factory decals use a durable vinyl film with a protective top layer that resists sun fade, fuel splash, pressure washing and trail abrasion. The adhesive is designed to hold on curved plastic panels through heat cycles and vibration.

Common Reasons Riders Replace This Part

• Replacing graphics scratched or peeled by brush and roost
• Refreshing a machine before selling or trading it in
• Finishing a body panel replacement so it matches
• Replacing illegible safety or warning labels

Signs Your Traxer Decal Needs Replacing

• Edges lifting or peeling away from the panel
• Colors faded or chalky from sun exposure
• Tears, scuffs or missing sections
• A new panel installed without its matching graphic
• Warning information you can no longer read

Installation Tips

1. Remove the old decal by warming it gently with a heat gun or hair dryer and peeling slowly.
2. Clean off leftover adhesive, then wipe the area with isopropyl alcohol.
3. Let the surface dry and work at room temperature (roughly 60–90°F).
4. Peel back a small section of backing, align one edge, and press outward with a squeegee.
5. Work across the decal to push out air, press the edges firmly and avoid pressure washing for 24–48 hours.

Not sure whether to tackle it yourself? Read when to seek professional help or DIY before you start.

Related OEM Parts for the Same Machines

Doing the job right? These genuine Can-Am parts fit the same models and are often replaced at the same time:

• Can-Am Operating Guide Warning Label (#704907949)
• Can-Am Reflector, Red (#705016982)
• Can-Am Dashboard Warning Label (#704908893)
• Can-Am Front Reflector, Left (#704905072)
• Can-Am Passenger Warning Label (#704907951)
• Can-Am Operating Guide Warning Label (#704907947)

Recommended Accessories and Maintenance Supplies

Pair your Traxer Decal with these parts and supplies:

• UTV and ATV graphics kits — Full kits to refresh or customize your machine
• UTV and ATV reflectors — Replacement reflectors for visibility
• Off-road cleaning kits — Cleaning kits that are safe on graphics
• UTV waxes and protectants — Protectants that help graphics resist UV fade
• Can-Am OEM parts diagrams — find every factory part for your model

Helpful Guides from the Witchdoctors Blog

• UTV Decals & Graphics: Ultimate Side-by-Side Buyer's Guide
• A Guide to UTV/ATV Warning Labels & Safety Decals
• How to Clean UTV & ATV Vinyl Seats to Prevent Cracking
• Can-Am OEM vs. Aftermarket Parts: Which Is Better?

Frequently Asked Questions

What is the OEM part number for this Can-Am Traxer Decal?

The genuine Can-Am part number is 704909791. Use it to match this part to your factory parts diagram.

Which Can-Am models does part #704909791 fit?

It fits the Traxter HD10 XT (Europe) (2024).

Is this a genuine Can-Am part?

Yes. This is a genuine Can-Am OEM part from BRP, the same part number used at the factory, not an aftermarket copy.

Will this decal match my other graphics?

Yes. It is the genuine Can-Am graphic for the listed models and years. Graphics on older machines may have faded slightly, so a new decal can look brighter at first.

Do I need to remove the panel to install it?

Usually not. Removing the panel can make cleaning and alignment easier on tight curves.

Can I apply it in cold weather?

For the best bond, apply it at room temperature. Warm the panel first if you are working in a cold garage.

Order Your Genuine Can-Am Traxer Decal Today

Get your Traxter HD10 XT (Europe) back to factory condition. Add the genuine Can-Am Traxer Decal (part #704909791) to your cart today, and order the related parts above at the same time so you can finish the job in one go.

• How long will it take to receive my order?
• Shipping and return policy
• Questions about fitment? Contact us
• Shop all Can-Am OEM parts

Where to Ride Your Can-Am

Ready to put your machine to work? These off-road parks welcome both ATVs and UTVs. Check each park's current rules, vehicle-width limits and permit requirements before you go.

• Anthracite Outdoor Adventure Area (AOAA) — Shamokin, Pennsylvania: about 200 miles of trails in former coal country
• Stony Lonesome OHV Park — Bremen, Alabama: about 100 miles of trails