Upper Steering Column Trim 707901199 by Can-Am

Genuine Can-Am Upper Steering Column Trim — OEM Part #707901199

Steer with confidence again with a genuine Can-Am Upper Steering Column Trim. Built for the Traxter HD11, it matches the factory splines, joints and mounting points, so the steering feels tight and works with Dynamic Power Steering (DPS) where equipped.

The steering wheel or handlebar, column, rack, tie rods and power steering unit all affect control. Play or binding in any one part shows up as vague or heavy steering. This part is confirmed for 2 Can-Am models from 2026. See the full fitment list below.

Upper Steering Column Trim at a Glance

• OEM part number: 707901199
• Brand: Can-Am by BRP (genuine factory part)
• Part type: Steering Column Cover
• Fits: Traxter utility side-by-side models, 2026
• Condition: New

Can-Am Models and Years This Upper Steering Column Trim Fits

Genuine Can-Am part #707901199 fits the models and years below. To be certain, match the part number to the factory parts diagram for your machine or contact us with your VIN before ordering.

Can-Am Traxter utility side-by-side Fitment

Why Choose a Genuine Can-Am OEM Upper Steering Column Trim?

• Factory fit with the rack, column and linkage
• Restores tight, precise steering
• Works with Can-Am DPS where equipped
• Helps keep alignment and tire wear in check
• Sold by Witchdoctors, with factory part numbers and parts diagrams for every Can-Am model we support

Features and Materials

Key Features

• Genuine Can-Am OEM steering part, part #707901199
• Original splines, threads and joints
• Corrosion- and impact-resistant construction
• Designed for the listed Can-Am models
• Works with factory DPS units, sensors and wiring where applicable

Materials and Construction

Can-Am steering parts use hardened steel shafts, racks and tie-rod ends with sealed joints, aluminum or steel housings, and sealed DPS motors and modules built for water and vibration.

Common Reasons Riders Replace This Part

• Fixing play, clunks or wandering
• Replacing bent tie rods or shafts after an impact
• Repairing DPS faults or heavy steering
• Restoring steering on a high-hour machine

Signs Your Upper Steering Column Trim Needs Replacing

• Free play in the steering
• Clunking when turning
• Heavy steering or a DPS warning
• Bent tie rods or an off-center wheel
• Torn boots on tie-rod ends or the rack

Installation Tips

1. Point the wheels straight before disconnecting parts.
2. Use the Can-Am parts diagram for hardware, cotter pins and DPS connectors.
3. Disconnect the battery before working on DPS parts.
4. Match the original spline position or tie-rod length.
5. Torque to spec, set toe and check lock-to-lock travel.

Not sure whether to tackle it yourself? Read when to seek professional help or DIY before you start.

Related OEM Parts for the Same Machines

Doing the job right? These genuine Can-Am parts fit the same models and are often replaced at the same time:

• Can-Am Compression Spring (#709403070)
• Can-Am Steering Wheel Trim, Deep Black (#709402881)
• Can-Am Steering Bushing (#709402725)
• Can-Am Central Steering Wheel Trim (#709402880)
• Can-Am Latch Lever, Coastal Gray (#709402896)
• Can-Am Latch Lever, Coastal Gray (#709403141)

Recommended Accessories and Maintenance Supplies

Pair your Upper Steering Column Trim with these parts and supplies:

• UTV tie rods — Tie rods and ends
• Steering racks and power steering — Racks and power steering parts
• Steering wheels — Steering wheels and hubs
• Drivetrain and steering — More drivetrain and steering parts
• Can-Am OEM parts diagrams — find every factory part for your model

Helpful Guides from the Witchdoctors Blog

• UTV & ATV Steering Rack, Shaft & Components Guide
• Bad UTV & ATV Tie Rods? Signs, Symptoms & How to Fix
• How to Inspect ATV Handlebar Safety | Stop The Wobble
• Can-Am OEM vs. Aftermarket Parts: Which Is Better?

Frequently Asked Questions

What is the OEM part number for this Can-Am Upper Steering Column Trim?

The genuine Can-Am part number is 707901199. Use it to match this part to your factory parts diagram.

Which Can-Am models does part #707901199 fit?

It fits the Traxter HD11 XU (International) (2026); Traxter MAX HD11 XU (International) (2026).

Is this a genuine Can-Am part?

Yes. This is a genuine Can-Am OEM part from BRP, the same part number used at the factory, not an aftermarket copy.

Do I need an alignment after steering work?

Yes. Set toe to prevent wander and tire wear.

Does DPS need a reset after service?

Some systems need a reset or calibration. Check your service manual or ask a dealer.

Can a bent steering part be straightened?

No. Always replace bent steering parts.

Order Your Genuine Can-Am Upper Steering Column Trim Today

Ride with confidence on parts built for your machine. Order the genuine Can-Am Upper Steering Column Trim, OEM part #707901199, from Witchdoctors today and keep your Traxter HD11 running the way BRP designed it.

• How long will it take to receive my order?
• Shipping and return policy
• Questions about fitment? Contact us
• Shop all Can-Am OEM parts

Where to Ride Your Can-Am

Ready to put your machine to work? These off-road parks welcome both ATVs and UTVs. Check each park's current rules, vehicle-width limits and permit requirements before you go.

• Hollister Hills SVRA — Hollister, California: a state vehicular recreation area with designated ATV and 4x4 areas
• Anthracite Outdoor Adventure Area (AOAA) — Shamokin, Pennsylvania: about 200 miles of trails in former coal country