Bearing, Ball by Polaris 3514426 OEM Bearing
Metal ball bearing with visible steel balls inside a circular housing mounted in gray machinery housing.
Metal ball bearing with visible steel balls mounted in a dark gray mechanical housing.
Metal engine casing with a visible circular ball bearing installed in the center section.
Metal ball bearing with visible steel balls inside a circular race, marked with engraved text.
Silver metal ball bearing with smooth outer ring and visible inner race mechanisms.
Metal ball bearing with visible ball bearings inside, shown next to a white ruler for scale.
Steel ball bearing with visible balls and smooth outer ring, designed for mechanical use.
Gray metal ball bearing with visible steel balls inside circular outer and inner rings.
An Image of the Genuine Polaris Logo reading 'GENUINE OEM PART' 3514426
Four Polaris off-road vehicles displayed with the Polaris logo above them on a white background.
Bearing, Ball by Polaris 3514426 OEM Bearing
Metal ball bearing with visible steel balls inside a circular housing mounted in gray machinery housing.
Metal ball bearing with visible steel balls mounted in a dark gray mechanical housing.
Metal engine casing with a visible circular ball bearing installed in the center section.
Metal ball bearing with visible steel balls inside a circular race, marked with engraved text.
Silver metal ball bearing with smooth outer ring and visible inner race mechanisms.
Metal ball bearing with visible ball bearings inside, shown next to a white ruler for scale.
Steel ball bearing with visible balls and smooth outer ring, designed for mechanical use.
Gray metal ball bearing with visible steel balls inside circular outer and inner rings.
An Image of the Genuine Polaris Logo reading 'GENUINE OEM PART' 3514426
Four Polaris off-road vehicles displayed with the Polaris logo above them on a white background.
Badge

Victory & Polaris Ball Bearing 3514426

$24.99 USD
Normally Ships in 5-7 Business Days

Inventory:

Loading..
SKU: 3514426
In stock and ready for shipping

SKU: 3514426

Genuine Victory & Polaris Ball Bearing — OEM Part #3514426

Skip the hardware-store guesswork. The genuine Victory & Polaris Ball Bearing matches the original thread pitch, length, strength and finish, so it fits your Victory motorcycle or Polaris off-road vehicle the first time and holds under vibration.

OEM hardware is engineered for a specific location and load. The wrong grade, length or finish can strip threads, loosen with vibration or look out of place on a show-quality bike. Because Victory, Indian and Polaris are all Polaris Inc. brands, this part number is shared across Victory motorcycles and Polaris off-road vehicles. Every model it fits is listed below.

Ball Bearing at a Glance

  • OEM part number: 3514426
  • Brand: Victory & Polaris (genuine Polaris-made OEM part)
  • Part type: OEM Bearing
  • Victory fitment: Boardwalk, Cross Country, Cross Roads, Gunner, Hammer, Hardball, Highball, Jackpot, Judge, Kingpin, Magnum, V92, Vegas, Vision and X1, 2003–2017
  • Polaris off-road fitment: ACE, RZR, Ranger and Sportsman, 2012–2024
  • Condition: New

Models and Years This Ball Bearing Fits

Genuine part #3514426 fits the models and years below, across Victory motorcycles and Polaris off-road vehicles. To be certain, match the part number to the factory parts diagram for your machine or contact us with your VIN before ordering.

Victory Motorcycle Fitment

Model Model Years
Victory Boardwalk 2013–2015
Victory Cross Country 2010–2017
Victory Cross Country Tour 2013–2017
Victory Cross Roads 2010–2014
Victory Cross Roads Classic 2013–2014
Victory Gunner 2015–2017
Victory Hammer 2005–2017
Victory Hardball 2013
Victory Highball 2013–2017
Victory Jackpot 2006–2016
Victory Judge 2013–2017
Victory Kingpin 2004–2011
Victory Magnum 2015–2017
Victory V92 CA Classic Cruiser 2003
Victory V92 TC 2003–2006
Victory Vegas 2003–2004, 2006–2017
Victory Vision 2008–2009, 2011–2017
Victory Vision Tour 2009–2010
Victory X1 2015–2017

Polaris Off-Road Vehicle Fitment

151 Polaris model variants share this part, grouped here by model family.

Model Family Model Years Variants
Polaris ACE 2016–2019 8
Polaris RZR 2012–2022 8
Polaris Ranger 2014–2024 45
Polaris Sportsman 2014–2023 90

Yes, a motorcycle part can fit an ATV or side-by-side: Polaris uses many of the same fasteners, seals, filters and electrical parts across its motorcycle and off-road lines, so this part number also appears in the Polaris off-road parts catalog.

Why Choose a Genuine Victory & Polaris OEM Ball Bearing?

  • Exact factory size, thread pitch and length
  • Correct strength grade for its location
  • Factory chrome, black or plated finish
  • No guessing at metric sizes
  • Sold by Witchdoctors, a Victory and Indian parts specialist since the Victory years

Features and Materials

Key Features

  • Genuine Victory & Polaris OEM hardware, part #3514426
  • Matches the original thread, length, head style and grade
  • Corrosion-resistant finish
  • Used across several Victory assemblies, as listed in the fitment table
  • Ideal for replacing lost, stripped or one-time-use fasteners

Materials and Construction

Victory fasteners are heat-treated alloy or carbon steel, or stainless steel where appearance and corrosion resistance matter, with chrome, black oxide or zinc finishes. Grommets, bushings and O-rings are rubber or polymer.

Common Reasons Riders Replace This Part

  • Replacing hardware that vibrated loose
  • Replacing stripped, rusted or rounded fasteners
  • Rebuilds that call for new one-time-use hardware
  • Replacing hardened grommets that cause rattles

Signs Your Ball Bearing Needs Replacing

  • Rounded heads or damaged threads
  • Rust or pitted chrome
  • Missing hardware or rattling panels
  • Cracked or hardened grommets
  • Self-locking nuts that were already reused

Installation Tips

  1. Check the Victory parts diagram for the location and quantity.
  2. Clean threads in the mating part.
  3. Use thread locker only where the service manual specifies.
  4. Start fasteners by hand to avoid cross-threading.
  5. Torque to the factory spec.

Not sure whether to tackle it yourself? Read when to seek professional help or DIY before you start.

Parts Diagrams for Your Bike

Find part #3514426 and every part installed with it in the factory parts diagrams for your model:

Related OEM Parts for the Same Bikes

Doing the job right? These genuine parts fit the same models and are often replaced at the same time:

Recommended Accessories and Maintenance Supplies

Pair your Ball Bearing with these parts and supplies:

Helpful Guides from the Witchdoctors Blog

Frequently Asked Questions

What is the OEM part number for this Victory & Polaris Ball Bearing?

The genuine part number is 3514426. Use it to match this part to your factory parts diagram.

Which Victory motorcycles does part #3514426 fit?

It fits 19 Victory models (Boardwalk, Cross Country, Cross Roads, Gunner, Hammer, Hardball, Highball, Jackpot, Judge, Kingpin, Magnum, V92, Vegas, Vision and X1) from 2003 to 2017. See the Victory fitment table above.

Does part #3514426 fit Indian motorcycles?

Not according to the factory fitment data we have. If you ride an Indian, contact us with your VIN and we will find the right part.

Does it fit Polaris ATVs or side-by-sides?

Yes. The same part number is used on 151 Polaris off-road models, including the ACE, RZR, Ranger and Sportsman. See the Polaris table above.

Is this a genuine OEM part?

Yes. This is a genuine Polaris-made OEM part, the same part number used at the factory for Victory and Polaris models, not an aftermarket copy.

Can I use a hardware-store bolt?

Grade, pitch, length and finish often differ. For brakes, suspension and engine parts, use the specified OEM fastener.

Is this sold individually?

This listing is for the part number shown. Check the diagram for the quantity used.

Does it fit Indian or Polaris models too?

Many Polaris-family fasteners are shared. Check the fitment tables below.

Order Your Genuine Victory & Polaris Ball Bearing Today

Victory parts get harder to find every year. Order the genuine Victory & Polaris Ball Bearing, OEM part #3514426, from Witchdoctors today and keep your Victory motorcycle or Polaris off-road vehicle running the way it was built.

Where to Ride Your Victory

Put fresh parts to work on two of America's great motorcycle roads. Check road conditions, seasonal closures and park rules before you go.

  • Skyline Drive — Shenandoah National Park, Virginia: 105 miles along the Blue Ridge crest
  • Mohawk Trail — Massachusetts: a historic Berkshires route with hairpin views

General Safety Warning & Installation Requirements

Your safety is our top priority. Whether you are maintaining a Victory® or Indian® Motorcycle, or servicing a UTV, ATV, or Side-by-Side, proper installation is vital to the performance and safety of your vehicle.

Important:
Warning: Failure to follow manufacturer-specified installation procedures and safety requirements can result in mechanical failure, loss of vehicle control, serious injury, or death.

Important Fitment Disclosure

At Witchdoctors, we want to ensure you get back on the road or trail as quickly as possible. Correct fitment is the most critical step in purchasing parts for your Victory® or Indian® Motorcycle. Also for your Polaris®, CFMoto®, Arctic Cat®, Yamaha®, Honda®, Can-Am®, Kawasaki® UTV and ATV.

Verification Required: While we strive for 100% accuracy, vehicle manufacturers often make mid-year production changes. Always verify your specific year, make, and model before finalizing your order.
Read More

Shipping

Qualifying Retail orders $159.99 or more will receive free ground shipping. Free Shipping Terms and conditions.

All orders over $500 will require a signature.

Please see International Shipping page for orders shipping outside the US.

See our full Shipping Policy page for further details.

Product Availability

We show real time product availability. These products normally ship the same business day but may ship from one of our warehouses across the country. If an item requires additional processing time you will be notified.

Returns

If your order arrives and it is not right, we will we'll fix it. We promise!

Doesn't fit or just not happy with it? You can return any new, unopened, unused or unaltered item within 30 days of delivery receipt of your item. We will issue a refund to your original payment method.

See our full Return Policy for all of the pertinent details.

Found URLs: