Genuine Polaris Warning Decal 4x4 — OEM Part #7175511
Bring back the factory finish on your Polaris ATV or side-by-side with a genuine Polaris Warning Decal 4x4. Faded, peeled or torn graphics make a machine look older than it is and can hurt resale value, and this OEM decal matches the original color, shape and placement exactly.
Decals and labels do more than look good. Model graphics identify your machine, and warning labels carry safety and loading information that must stay legible. This part is confirmed for 53 Polaris models from 2005 to 2017. See the full fitment list below.
Warning Decal 4x4 at a Glance
-
OEM part number: 7175511
-
Brand: Polaris (genuine factory part)
-
Part type: Warning Label
-
Note: AWD
-
Fits: Farmhand utility vehicle, Hawkeye ATV, Phoenix ATV, Sawtooth ATV, Scrambler ATV, Sportsman ATV, Trail Blazer ATV and Trail Boss ATV models, 2005–2017
-
Condition: New
Polaris Models and Years This Warning Decal 4x4 Fits
Genuine Polaris part #7175511 fits the models and years below. To be certain, match the part number to the factory parts diagram for your machine or contact us with your VIN before ordering.
This part is shared across 53 Polaris model variants, so the table below groups them by model family. Your exact trim is listed in the parts diagrams linked further down.
Polaris Farmhand utility vehicle Fitment
| Model Family |
Model Years |
Trims |
| Polaris Farmhand HD |
2017 |
1 |
Polaris Hawkeye ATV Fitment
| Model Family |
Model Years |
Trims |
| Polaris Hawkeye |
2007 |
1 |
| Polaris Hawkeye 2x4 |
2008, 2011 |
1 |
| Polaris Hawkeye 300 |
2009–2010 |
1 |
| Polaris Hawkeye 325 |
2015 |
1 |
| Polaris Hawkeye 400 |
2011–2013 |
2 |
Polaris Phoenix ATV Fitment
| Model Family |
Model Years |
Trims |
| Polaris Phoenix 200 |
2005–2017 |
2 |
Polaris Sawtooth ATV Fitment
| Model Family |
Model Years |
Trims |
| Polaris Sawtooth |
2006 |
1 |
| Polaris Sawtooth 200 |
2007 |
1 |
Polaris Scrambler ATV Fitment
| Model Family |
Model Years |
Trims |
| Polaris Scrambler 2x4 |
2008–2009 |
1 |
| Polaris Scrambler 500 |
2005–2012 |
2 |
Polaris Sportsman ATV Fitment
| Model Family |
Model Years |
Trims |
| Polaris Sportsman 300 |
2008–2010 |
1 |
| Polaris Sportsman 400 |
2008–2014 |
2 |
| Polaris Sportsman 450 |
2016–2017 |
1 |
| Polaris Sportsman 500 |
2011–2013 |
2 |
| Polaris Sportsman 550 |
2010–2014 |
3 |
| Polaris Sportsman 570 |
2014–2017 |
8 |
| Polaris Sportsman 800 |
2011–2014 |
2 |
| Polaris Sportsman 850 |
2014–2017 |
3 |
| Polaris Sportsman 1000 |
2015–2017 |
2 |
| Polaris Sportsman ETX |
2015 |
1 |
| Polaris Sportsman Forest |
2012 |
1 |
| Polaris Sportsman Touring |
2011 |
1 |
| Polaris Sportsman XP |
2009–2014, 2016–2017 |
9 |
Polaris Trail Blazer ATV Fitment
| Model Family |
Model Years |
Trims |
| Polaris Trail Blazer |
2005–2006 |
1 |
| Polaris Trail Blazer 330 |
2008–2013 |
1 |
Polaris Trail Boss ATV Fitment
| Model Family |
Model Years |
Trims |
| Polaris Trail Boss 330 |
2005–2013 |
1 |
Why Choose a Genuine Polaris OEM Warning Decal 4x4?
- Exact factory color match, so it blends with the graphics around it
- Pre-cut to the original outline, with no trimming
- Correct placement for the specific panel it was designed for
- Keeps your machine looking original, which helps at resale or trade-in
- Sold by Witchdoctors, with factory part numbers and parts diagrams for every Polaris model we support
Features and Materials
Key Features
- Genuine Polaris OEM graphic, part #7175511
- UV-resistant inks made for outdoor powersports use
- Pressure-sensitive adhesive backing for a clean, bubble-free bond
- Sized and shaped for the original panel location
- Ready to apply. No paint, primer or special tools needed
Materials and Construction
Polaris factory decals use a durable vinyl film with a protective top layer that resists sun fade, fuel splash, pressure washing and trail abrasion. The adhesive is designed to hold on curved plastic panels through heat cycles and vibration.
Common Reasons Riders Replace This Part
- Replacing graphics scratched or peeled by brush and roost
- Refreshing a machine before selling or trading it in
- Finishing a body panel replacement so it matches
- Replacing illegible safety or warning labels
Signs Your Warning Decal 4x4 Needs Replacing
- Edges lifting or peeling away from the panel
- Colors faded or chalky from sun exposure
- Tears, scuffs or missing sections
- A new panel installed without its matching graphic
- Warning information you can no longer read
Installation Tips
- Remove the old decal by warming it gently with a heat gun or hair dryer and peeling slowly.
- Clean off leftover adhesive, then wipe the area with isopropyl alcohol.
- Let the surface dry and work at room temperature (roughly 60–90°F).
- Peel back a small section of backing, align one edge, and press outward with a squeegee.
- Work across the decal to push out air, press the edges firmly and avoid pressure washing for 24–48 hours.
Not sure whether to tackle it yourself? Read when to seek professional help or DIY before you start.
Polaris Parts Diagrams for Your Machine
Find part #7175511 and every part installed with it in the factory Polaris parts diagrams for your model:
Related OEM Parts for the Same Machines
Doing the job right? These genuine Polaris parts fit the same models and are often replaced at the same time:
Recommended Accessories and Maintenance Supplies
Pair your Warning Decal 4x4 with these parts and supplies:
Helpful Guides from the Witchdoctors Blog
Frequently Asked Questions
What is the OEM part number for this Polaris Warning Decal 4x4?
The genuine Polaris part number is 7175511. Use it to match this part to your factory parts diagram. Note: AWD.
Which Polaris models does part #7175511 fit?
It fits 53 Polaris Farmhand, Hawkeye, Phoenix, Sawtooth, Scrambler, Sportsman, Trail Blazer and Trail Boss models from 2005 to 2017. The complete list is in the fitment tables above.
Is this a genuine Polaris part?
Yes. This is a genuine Polaris OEM part, the same part number used at the factory, not an aftermarket copy.
Will this decal match my other graphics?
Yes. It is the genuine Polaris graphic for the listed models and years. Graphics on older machines may have faded slightly, so a new decal can look brighter at first.
Do I need to remove the panel to install it?
Usually not. Removing the panel can make cleaning and alignment easier on tight curves.
Can I apply it in cold weather?
For the best bond, apply it at room temperature. Warm the panel first if you are working in a cold garage.
Order Your Genuine Polaris Warning Decal 4x4 Today
Get your Polaris ATV or side-by-side back to factory condition. Add the genuine Polaris Warning Decal 4x4 (part #7175511) to your cart today, and order the related parts above at the same time so you can finish the job in one go.
Where to Ride Your Polaris
Ready to put your machine to work? These off-road parks welcome both ATVs and UTVs. Check each park's current rules, vehicle-width limits and permit requirements before you go.
-
Hatfield-McCoy Trails — southern West Virginia: multiple permit-access trail systems across the coalfields
-
Paiute ATV Trail — central Utah: 250 miles of marked trail linking to 2,000+ more