Washer 9060-342013 by CFMOTO

Genuine CFMoto Washer — OEM Part #9060-342013

Small parts hold big things together. The genuine CFMoto Washer is the exact factory fastener specified for your ZForce models, with the correct size, thread, length, grade and finish, so it fits right and holds torque the way CFMoto engineered it.

OEM hardware is engineered for a specific location and load. Using the wrong grade, length or thread can strip threads, loosen under vibration or let critical parts shift. This part is confirmed for 4 CFMoto models from 2012 to 2017. See the full fitment list below.

Washer at a Glance

• OEM part number: 9060-342013
• Brand: CFMOTO (genuine factory part)
• Part type: Safety Belt Repair
• Fits: ZForce sport UTV models, 2012–2017
• Condition: New

CFMoto Models and Years This Washer Fits

Genuine CFMoto part #9060-342013 fits the models and years below. To be certain, match the part number to the factory parts diagram for your machine or contact us with your VIN before ordering.

CFMoto ZForce sport UTV Fitment

Why Choose a Genuine CFMoto OEM Washer?

• Exact factory size, thread pitch and length
• Correct strength grade for the location it is used in
• Factory corrosion-resistant finish
• No guessing at the hardware store or mixing metric sizes
• Sold by Witchdoctors, a CFMoto OEM parts source with factory part numbers and diagrams for every listing

Features and Materials

Key Features

• Genuine CFMoto OEM hardware, part #9060-342013
• Matches the original thread, length, head style and grade
• Zinc-plated or coated finish to resist corrosion (where applicable)
• Used across multiple CFMoto assemblies, as listed in the fitment table
• Ideal for replacing lost, stripped or one-time-use fasteners

Materials and Construction

CFMoto fasteners are made from heat-treated alloy or carbon steel, or stainless steel where corrosion resistance matters most, and finished with zinc or similar plating. Washers, clips and bushings are made from steel, spring steel, nylon or rubber depending on the job.

Common Reasons Riders Replace This Part

• Replacing hardware lost on the trail
• Replacing stretched, rusted or stripped fasteners
• Rebuilds that call for new one-time-use hardware
• Keeping a spare supply for common repairs

Signs Your Washer Needs Replacing

• Rounded heads or damaged threads
• Rust or corrosion that weakens the fastener
• Missing hardware that leaves a part loose
• Bolts that will not hold torque
• Self-locking nuts or one-time bolts that have already been reused

Installation Tips

1. Check the CFMoto parts diagram to confirm the location and quantity you need.
2. Clean the threads in the mating part, and chase damaged threads with a tap if needed.
3. Apply thread locker or anti-seize only where the service manual specifies.
4. Start the fastener by hand to avoid cross-threading.
5. Tighten to the factory torque spec with a calibrated torque wrench.

Not sure whether to tackle it yourself? Read when to seek professional help or DIY before you start.

Recommended Accessories and Maintenance Supplies

Pair your Washer with these parts and supplies:

• Fasteners, clips and bearings — Assorted hardware for repairs and rebuilds
• UTV shop supplies — Thread locker, cleaners and garage supplies
• Garage tools — Torque wrenches and hand tools for your machine
• Zip ties — Heavy-duty ties for wiring and hose routing
• CFMoto OEM parts diagrams — find every factory part for your model

Helpful Guides from the Witchdoctors Blog

• OEM Hardware Buyer’s Guide for UTVs & ATVs
• Can You Use Anti-Seize and Loctite on UTV Bolts?
• A Guide to Fasteners and Tools Used on Motorcycles and UTVs
• CFMoto OEM vs. Aftermarket Parts: Which Is Better?

Frequently Asked Questions

What is the OEM part number for this CFMoto Washer?

The genuine CFMoto part number is 9060-342013. Use it to match this part to your factory parts diagram.

Which CFMoto models does part #9060-342013 fit?

It fits the ZForce 500 (2016); ZForce 600 (2012–2015); ZForce 800 EX (2014–2017); ZForce 800 Trail (2015–2016).

Is this a genuine CFMoto part?

Yes. This is a genuine CFMOTO OEM part, the same part number used by CFMoto at the factory, not an aftermarket copy.

Can I use a hardware-store bolt instead?

It may look the same, but grade, thread pitch, length and finish often differ. For anything structural, such as suspension, brakes or engine parts, use the OEM fastener specified for that location.

Is this sold individually?

This listing is for the part number shown. Check the parts diagram for the quantity used at each location, and order enough to replace them all.

Should I reuse self-locking nuts?

No. Self-locking and torque-to-yield fasteners are designed for one use. Replace them whenever they are removed.

About Availability of Part #9060-342013

CFMoto has marked this part as no longer available. It may have been replaced by a newer part number. Contact our customer service team with your VIN and we will help you find the current replacement, or read more about parts that are no longer available.

Where to Ride Your CFMoto

Ready to put your machine to work? These off-road parks welcome both ATVs and UTVs. Check each park's current rules, vehicle-width limits and permit requirements before you go.

• Barnwell Mountain Recreation Area — Gilmer, Texas: about 50 miles of trails
• Hatfield-McCoy Trails — southern West Virginia: multiple permit-access trail systems across the coalfields