Genuine Polaris Flat Washer — OEM Part #0452513
Small parts hold big things together. The genuine Polaris Flat Washer is the exact factory fastener specified for your Polaris ATV or side-by-side, with the correct size, thread, length, grade and finish, so it fits right and holds torque.
OEM hardware is engineered for a specific location and load. The wrong grade, length or thread can strip threads, loosen under vibration or let critical parts shift. This part is confirmed for 6 Polaris models from 2005 to 2026. See the full fitment list below.
Flat Washer at a Glance
-
OEM part number: 0452513
-
Brand: Polaris (genuine factory part)
-
Part type: Transmission Components
-
Fits: Phoenix ATV, RZR sport side-by-side and Sawtooth ATV models, 2005–2026
-
Condition: New
Polaris Models and Years This Flat Washer Fits
Genuine Polaris part #0452513 fits the models and years below. To be certain, match the part number to the factory parts diagram for your machine or contact us with your VIN before ordering.
Polaris Phoenix ATV Fitment
| Model |
Model Years |
| Polaris Phoenix 200 |
2005–2026 |
| Polaris Phoenix 200 MD (International) |
2017–2026 |
Polaris RZR sport side-by-side Fitment
| Model |
Model Years |
| Polaris RZR 170 |
2009–2021 |
| Polaris RZR 170 MD (International) |
2019–2021 |
Polaris Sawtooth ATV Fitment
| Model |
Model Years |
| Polaris Sawtooth |
2006 |
| Polaris Sawtooth 200 |
2007 |
Why Choose a Genuine Polaris OEM Flat Washer?
- Exact factory size, thread pitch and length
- Correct strength grade for its location
- Factory corrosion-resistant finish
- No guessing at sizes or grades
- Sold by Witchdoctors, with factory part numbers and parts diagrams for every Polaris model we support
Features and Materials
Key Features
- Genuine Polaris OEM hardware, part #0452513
- Matches the original thread, length, head style and grade
- Plated or coated to resist corrosion (where applicable)
- Used across several Polaris assemblies, as listed in the fitment table
- Ideal for replacing lost, stripped or one-time-use fasteners
Materials and Construction
Polaris fasteners are heat-treated alloy or carbon steel, or stainless steel where corrosion resistance matters most, with zinc or similar plating. Washers, clips and bushings are steel, spring steel, nylon or rubber depending on the job.
Common Reasons Riders Replace This Part
- Replacing hardware lost on the trail
- Replacing stretched, rusted or stripped fasteners
- Rebuilds that call for new one-time-use hardware
- Keeping spares for common repairs
Signs Your Flat Washer Needs Replacing
- Rounded heads or damaged threads
- Rust that weakens the fastener
- Missing hardware that leaves a part loose
- Bolts that will not hold torque
- Self-locking nuts or one-time bolts that were already reused
Installation Tips
- Check the Polaris parts diagram for the location and quantity you need.
- Clean the threads in the mating part, chasing damaged threads with a tap if needed.
- Apply thread locker or anti-seize only where the service manual specifies.
- Start the fastener by hand to avoid cross-threading.
- Tighten to the factory torque spec with a calibrated torque wrench.
Not sure whether to tackle it yourself? Read when to seek professional help or DIY before you start.
Polaris Parts Diagrams for Your Machine
Find part #0452513 and every part installed with it in the factory Polaris parts diagrams for your model:
Related OEM Parts for the Same Machines
Doing the job right? These genuine Polaris parts fit the same models and are often replaced at the same time:
Recommended Accessories and Maintenance Supplies
Pair your Flat Washer with these parts and supplies:
Helpful Guides from the Witchdoctors Blog
Frequently Asked Questions
What is the OEM part number for this Polaris Flat Washer?
The genuine Polaris part number is 0452513. Use it to match this part to your factory parts diagram.
Which Polaris models does part #0452513 fit?
It fits the Phoenix 200 (2005–2026); Phoenix 200 MD (International) (2017–2026); RZR 170 (2009–2021); RZR 170 MD (International) (2019–2021); Sawtooth (2006); Sawtooth 200 (2007).
Is this a genuine Polaris part?
Yes. This is a genuine Polaris OEM part, the same part number used at the factory, not an aftermarket copy.
Can I use a hardware-store bolt instead?
It may look the same, but grade, pitch, length and finish often differ. For suspension, brakes or engine parts, use the specified OEM fastener.
Is this sold individually?
This listing is for the part number shown. Check the parts diagram for the quantity at each location.
Should I reuse self-locking nuts?
No. Self-locking and torque-to-yield fasteners are designed for one use.
Order Your Genuine Polaris Flat Washer Today
Get your Polaris ATV or side-by-side back to factory condition. Add the genuine Polaris Flat Washer (part #0452513) to your cart today, and order the related parts above at the same time so you can finish the job in one go.
Where to Ride Your Polaris
Ready to put your machine to work? These off-road parks welcome both ATVs and UTVs. Check each park's current rules, vehicle-width limits and permit requirements before you go.