Indian Clutch Thrust Washer 1327196

Genuine Indian Clutch Thrust Washer — OEM Part #1327196

A slipping or dragging clutch takes the fun out of every ride. The genuine Indian Clutch Thrust Washer (part #1327196) restores factory engagement on the Indian FTR, FTR R Carbon and other models.

The clutch and primary drive transfer engine power to the transmission and let you launch smoothly. Worn parts cause slipping, dragging and hard shifts. This part is confirmed for 17 Indian models from 2023 to 2026. See the full fitment list below.

Indian Clutch Thrust Washer at a Glance

• OEM part number: 1327196
• Brand: Indian Motorcycle (genuine OEM part)
• Part type: Clutch Repair Parts
• Fits: Indian Scout and FTR models, 2023–2026
• Condition: New

Indian Models and Years This Clutch Thrust Washer Fits

Genuine Indian part #1327196 fits the models and years below. To be certain, match the part number to the factory parts diagram for your bike, or contact us with your VIN before ordering.

Indian Scout Fitment

Indian FTR Fitment

Why Choose a Genuine Indian OEM Clutch Thrust Washer?

• Factory engagement feel and lever pull
• Correct friction and spring rates for Indian torque
• Smooth, predictable launches
• Reduces wear on the transmission
• Made to the same specifications as the part installed at the factory, not an aftermarket copy
• Sold by Witchdoctors, an Indian Motorcycle OEM parts source with factory part numbers and diagrams for every listing

Every Indian, from the Chief and Chieftain to the Challenger, Scout and FTR, is engineered as a complete system. Genuine OEM parts keep your bike correct, reliable and easier to sell. Learn more in our Indian motorcycle parts guide.

Features and Materials

Key Features

• Genuine Indian Motorcycle OEM part #1327196
• Matches original dimensions and splines
• Designed to run in the Indian wet clutch
• Direct replacement for the listed models

Materials and Construction

Indian clutch parts use bonded friction plates, hardened steel plates and springs, and machined aluminum or steel hubs and baskets built to run in oil.

Common Reasons Riders Replace This Part

• Fixing a slipping clutch under acceleration
• Curing clutch drag or hard neutral
• Clutch rebuilds at high mileage
• Replacing worn clutch hardware or covers

Signs Your Clutch Thrust Washer Needs Replacing

• Engine revs rise but speed does not
• Hard to find neutral or the bike creeps in gear
• Clunky or notchy shifts
• Burnt smell or debris in the oil

Installation Tips

1. Drain oil if the job requires opening the clutch or primary cover.
2. Remove the cover and note the order of plates and springs.
3. Soak new friction plates in the specified oil before installing.
4. Install parts in the factory order and torque bolts in a cross pattern.
5. Set cable free play or check hydraulic operation, then refill and test-ride.

Not sure whether to do it yourself? Read when to seek professional help or DIY before you start.

Indian Parts Diagrams for This Part

Browse all Indian motorcycle parts diagrams to find part #1327196 for your model.

Related Indian OEM Parts

Doing the job right? These genuine Indian parts fit the same bikes and are often replaced at the same time:

• Indian Clutch Lifter (#1327505)
• Indian Clutch Lifter (#1205702)
• Indian Clutch Spring Seat (#5262709)
• Indian Clutch Stopper Plate (#5272031)
• Indian Clutch Pressure Plate Spring (#7045814)
• Indian Clutch Lifter (#1327195)

Recommended Accessories and Maintenance Supplies

Pair your Clutch Thrust Washer with these parts and supplies:

• Indian clutch and throttle cables — Replacement and extended-length cables
• Indian oil change kits — Complete oil change kits for Indian models
• Indian engine parts — Gaskets, seals, bearings and internal engine parts
• Indian motorcycle levers — Clutch and brake levers
• Indian OEM parts diagrams — find every factory part for your model

Helpful Guides from the Witchdoctors Blog

• What Does JASO Rated Oil Mean and Why Does It Matter?
• Replacing Motorcycle Gasket & Seal Tips
• How to Prepare Your Motorcycle for Winter Storage.
• Can You Ride a Motorcycle in The Rain?

Frequently Asked Questions

What is the OEM part number for this Indian Clutch Thrust Washer?

The genuine Indian Motorcycle part number is 1327196. Use it to match this part to your factory parts diagram.

Which Indian models does part #1327196 fit?

It fits 17 Indian models from 2023 to 2026. See the fitment tables above for every model and year.

Is this a genuine Indian Motorcycle part?

Yes. This is a genuine Indian Motorcycle OEM part, the same part number used at the factory, not an aftermarket copy.

How do I make sure this fits my bike?

Match part #1327196 to the parts diagram for your model and year, or send us your VIN and we will confirm it for you.

Should I replace all clutch plates together?

Yes. Replacing friction and steel plates as a set gives even engagement and the longest life.

Can the wrong oil make my clutch slip?

Yes. Use a JASO MA-rated motorcycle oil. Oils with friction modifiers can cause slipping.

Do I need a new cover gasket?

Usually. Replace the gasket or O-ring whenever the cover is removed.

Order Your Genuine Indian Clutch Thrust Washer Today

Ride with confidence on parts made for your bike. Order the genuine Indian Clutch Thrust Washer, OEM part #1327196, from Witchdoctors today and keep your Indian FTR, FTR R Carbon and other models running the way Indian designed it.

• How long will it take to receive my order?
• Shipping and return policy
• Questions about fitment? Contact us
• Shop all Indian OEM parts

Where to Ride Your Indian

Your Indian was built for the open road. These scenic routes are favorites with motorcycle riders. Check current road conditions, seasonal closures and park fees before you go.

• Big Sur Coast Highway (Route 1) — Big Sur, California: Pacific cliffs and bridges (check for seasonal closures)
• Kancamagus Scenic Byway — White Mountains, New Hampshire: 34.5 miles through the White Mountain National Forest