Genuine Kawasaki Water Pump Seal — OEM Part #49063-1055
Keep your Kawasaki ATV or side-by-side running cool under load with a genuine Kawasaki Water Pump Seal. It connects to the original hoses, mounts and wiring, so you get the factory cooling performance Kawasaki engineered for hot days, slow crawling and heavy work.
The radiator, water pump, fan, thermostat, hoses and reservoir work together to hold engine temperature steady. If one part fails, the whole system suffers. This part is confirmed for 82 Kawasaki models from 2007 to 2027. See the full fitment list below.
Water Pump Seal at a Glance
-
OEM part number: 49063-1055
-
Brand: Kawasaki (genuine factory part)
-
Part type: Water Pumps & Components
-
Fits: Brute Force ATV, KFX sport and youth ATV, Mule utility side-by-side, Ridge ranch side-by-side and Teryx recreation side-by-side models, 2007–2027
-
Condition: New
Kawasaki Models and Years This Water Pump Seal Fits
Genuine Kawasaki part #49063-1055 fits the models and years below. To be certain, match the part number to the factory parts diagram for your machine or contact us with your VIN before ordering.
This part is shared across 82 Kawasaki model variants, so the table below groups them by model family. Your exact trim is listed in the parts diagrams linked further down.
Kawasaki Brute Force ATV Fitment
| Model Family |
Model Years |
Trims |
| Kawasaki Brute Force 650 |
2007–2013 |
4 |
| Kawasaki Brute Force 750 |
2007–2025 |
10 |
Kawasaki KFX sport and youth ATV Fitment
| Model Family |
Model Years |
Trims |
| Kawasaki KFX 700 |
2007–2009 |
1 |
Kawasaki Mule utility side-by-side Fitment
| Model Family |
Model Years |
Trims |
| Kawasaki Mule PRO-FX |
2024–2027 |
1 |
| Kawasaki Mule PRO-FXR |
2024–2027 |
2 |
| Kawasaki Mule PRO-FXT |
2024–2027 |
5 |
Kawasaki Ridge ranch side-by-side Fitment
| Model Family |
Model Years |
Trims |
| Kawasaki Ridge |
2024–2026 |
18 |
Kawasaki Teryx recreation side-by-side Fitment
| Model Family |
Model Years |
Trims |
| Kawasaki Teryx |
2015–2024 |
4 |
| Kawasaki Teryx 750 |
2008–2013 |
6 |
| Kawasaki Teryx KRX |
2020–2027 |
9 |
| Kawasaki Teryx KRX4 |
2023–2027 |
8 |
| Kawasaki Teryx4 |
2012–2013, 2015–2026 |
13 |
| Kawasaki Teryx5 |
2026 |
1 |
Why Choose a Genuine Kawasaki OEM Water Pump Seal?
- Factory flow and capacity for your engine
- Direct-fit connections with no adapters
- Heat- and pressure-resistant construction
- Helps prevent overheating and head gasket failure
- Sold by Witchdoctors, with factory part numbers and parts diagrams for every Kawasaki model we support
Features and Materials
Key Features
- Genuine Kawasaki OEM cooling part, part #49063-1055
- Original hose sizes, mounts and connectors
- Built for the pressure and temperature of the listed engines
- Designed for mud, dust and debris
- Works with Kawasaki-approved coolant
Materials and Construction
Kawasaki cooling parts use aluminum radiator cores, reinforced rubber hoses rated for hot coolant under pressure, glass-reinforced plastic housings and steel or stainless clamps.
Common Reasons Owners Replace This Part
- Fixing coolant leaks and overheating
- Replacing parts damaged by mud packing or debris
- Preventive replacement of aging hoses and seals
- Restoring cooling after an engine rebuild
Signs Your Water Pump Seal Needs Replacing
- Temperature warning or rising gauge
- Coolant leaks or a sweet smell after riding
- A fan that does not run or makes noise
- Cracked, swollen or soft hoses
- Coolant bubbling or boiling over in the reservoir
Installation Tips
- Let the engine cool completely before opening the system.
- Drain coolant into a container and dispose of it properly.
- Install the new part with fresh clamps, gaskets and O-rings where specified.
- Refill with the coolant in your Kawasaki manual and bleed air from the system.
- Run to operating temperature, check for leaks and top up the reservoir.
Not sure whether to tackle it yourself? Read when to seek professional help or DIY before you start.
Kawasaki Parts Diagrams for Your Machine
Find part #49063-1055 and every part installed with it in the factory Kawasaki parts diagrams for your model:
Related OEM Parts for the Same Machines
Doing the job right? These genuine Kawasaki parts fit the same models and are often replaced at the same time:
Recommended Accessories and Maintenance Supplies
Pair your Water Pump Seal with these parts and supplies:
Helpful Guides from the Witchdoctors Blog
Frequently Asked Questions
What is the OEM part number for this Kawasaki Water Pump Seal?
The genuine Kawasaki part number is 49063-1055. Use it to match this part to your factory parts diagram.
Which Kawasaki models does part #49063-1055 fit?
It fits 82 Kawasaki Brute Force, KFX, Mule, Ridge and Teryx models from 2007 to 2027. The complete list is in the fitment tables above.
Is this a genuine Kawasaki part?
Yes. This is a genuine Kawasaki OEM part, the same part number used at the factory, not an aftermarket copy.
What coolant should I use?
Use the coolant type and mix in your Kawasaki owner's manual. Mixing coolant types can cause gelling or corrosion.
Do I need to bleed the cooling system?
Yes. Trapped air causes hot spots and overheating. Follow the procedure for your model.
Why does my machine overheat in mud?
Mud packed in the radiator fins blocks airflow. Clean the radiator regularly from the back side with low-pressure water.
Order Your Genuine Kawasaki Water Pump Seal Today
Work and ride with confidence on parts built for your machine. Order the genuine Kawasaki Water Pump Seal, OEM part #49063-1055, from Witchdoctors today and keep your Kawasaki ATV or side-by-side running the way Kawasaki designed it.
Where to Ride Your Kawasaki
Ready to put your machine to work? These off-road parks welcome both ATVs and UTVs. Check each park's current rules, vehicle-width limits and permit requirements before you go.