Genuine Polaris Bumper Mount, Black — OEM Part #1019482-329
Protect your investment with a genuine Polaris Bumper Mount, Black. Built for the Ranger Diesel or Ranger Hst, this OEM part takes the abuse so your frame, suspension and drivetrain do not have to, and it mounts without drilling.
Bumpers, skid plates and guards are the first line of defense. They spread out impacts that would otherwise bend frame rails, crack cases or damage suspension parts. This part is confirmed for 4 Polaris models from 2014 to 2017. See the full fitment list below.
Bumper Mount, Black at a Glance
-
OEM part number: 1019482-329
-
Brand: Polaris (genuine factory part)
-
Part type: Front Bumper
-
Color: Black
-
Fits: Ranger utility side-by-side models, 2014–2017
-
Condition: New
Polaris Models and Years This Bumper Mount Fits
Genuine Polaris part #1019482-329 fits the models and years below. To be certain, match the part number to the factory parts diagram for your machine or contact us with your VIN before ordering.
Polaris Ranger utility side-by-side Fitment
| Model |
Model Years |
| Polaris Ranger Diesel Deluxe |
2014 |
| Polaris Ranger Diesel Hst |
2014–2017 |
| Polaris Ranger Diesel Hst Deluxe |
2014 |
| Polaris Ranger Hst |
2015–2017 |
Why Choose a Genuine Polaris OEM Bumper Mount?
- Bolts to factory mounting points, with no drilling
- Shields expensive parts from rocks, stumps and debris
- Works with the factory frame and ground clearance
- Costs far less than repairing the parts it protects
- Sold by Witchdoctors, with factory part numbers and parts diagrams for every Polaris model we support
Features and Materials
Key Features
- Genuine Polaris OEM protection part, part #1019482-329
- Designed around the original frame and suspension geometry
- Corrosion-resistant finish for wet and muddy conditions
- Uses factory hardware locations
- Built for repeated trail impacts
Materials and Construction
Polaris protection parts are typically steel tube, stamped steel, aluminum or high-density polyethylene (HDPE), depending on location, finished to resist corrosion from mud, water and road salt.
Common Reasons Riders Replace This Part
- Rock crawling and technical trails
- Farm and ranch work around brush, posts and stumps
- Replacing a bent bumper or cracked skid plate
- Restoring factory protection on a used machine
Signs Your Bumper Mount Needs Replacing
- Bent, cracked or torn bumpers, plates or guards
- Missing or loose mounting hardware
- Deep gouges that weaken the part
- Rust-through on steel parts
- Damage to the components behind the guard
Installation Tips
- Support the machine safely on stands if working underneath.
- Use the Polaris parts diagram to identify every bolt and bracket.
- Remove the damaged part and check the frame mounts for cracks or bends.
- Install with fresh hardware where needed and thread locker if the manual calls for it.
- Torque to spec and recheck after your first ride.
Not sure whether to tackle it yourself? Read when to seek professional help or DIY before you start.
Polaris Parts Diagrams for Your Machine
Find part #1019482-329 and every part installed with it in the factory Polaris parts diagrams for your model:
Related OEM Parts for the Same Machines
Doing the job right? These genuine Polaris parts fit the same models and are often replaced at the same time:
Recommended Accessories and Maintenance Supplies
Pair your Bumper Mount with these parts and supplies:
Helpful Guides from the Witchdoctors Blog
Frequently Asked Questions
What is the OEM part number for this Polaris Bumper Mount?
The genuine Polaris part number is 1019482-329. Use it to match this part to your factory parts diagram.
Which Polaris models does part #1019482-329 fit?
It fits the Ranger Diesel Deluxe (2014); Ranger Diesel Hst (2014–2017); Ranger Diesel Hst Deluxe (2014); Ranger Hst (2015–2017).
Is this a genuine Polaris part?
Yes. This is a genuine Polaris OEM part, the same part number used at the factory, not an aftermarket copy.
Is this as strong as aftermarket armor?
It is built to the factory standard for the listed models. Aftermarket armor may be heavier, but the OEM part fits the factory mounts exactly and keeps the original weight and clearance.
Can I mount a winch with this part?
Only if the Polaris parts diagram shows a winch mount for your model. Otherwise use the dedicated winch mount.
Should I replace the hardware too?
Hardware that has taken a hard hit can stretch or bend. Replace damaged bolts and use fresh thread locker.
Order Your Genuine Polaris Bumper Mount Today
Ride with confidence on parts built for your machine. Order the genuine Polaris Bumper Mount, Black, OEM part #1019482-329, from Witchdoctors today and keep your Ranger Diesel or Ranger Hst running the way Polaris designed it.
Where to Ride Your Polaris
Ready to put your machine to work? These off-road parks welcome both ATVs and UTVs. Check each park's current rules, vehicle-width limits and permit requirements before you go.