Genuine Polaris Catch, Left — OEM Part #1016942
Your machine earns its keep hauling gear, feed, firewood and tools. The genuine Polaris Catch, Left restores factory cargo and storage function on your Ranger models, fitting the original mounts so loads stay secure and latches work the way they should.
Beds, racks, storage bins and hitch parts carry real weight over rough ground. Worn latches, cracked bins and bent brackets make loads unsafe and let water ruin what you carry. This part is confirmed for 17 Polaris models from 2016 to 2026. See the full fitment list below.
Catch, Left at a Glance
-
OEM part number: 1016942
-
Brand: Polaris (genuine factory part)
-
Part type: Tailgates & Components
-
Position: Left
-
Fits: Ranger utility side-by-side models, 2016–2026
-
Condition: New
Polaris Models and Years This Catch Fits
Genuine Polaris part #1016942 fits the models and years below. To be certain, match the part number to the factory parts diagram for your machine or contact us with your VIN before ordering.
Polaris Ranger utility side-by-side Fitment
| Model |
Model Years |
| Polaris Ranger 48V EV (International) |
2022 |
| Polaris Ranger 48V EV MD (International) |
2020–2021 |
| Polaris Ranger 500 |
2021–2022, 2026 |
| Polaris Ranger 500 2WD |
2021 |
| Polaris Ranger 500 Is (International) |
2021–2022 |
| Polaris Ranger 570 |
2020–2021 |
| Polaris Ranger 570 EPS |
2021, 2023 |
| Polaris Ranger 570 EPS HD (International) |
2023 |
| Polaris Ranger 570 EPS Hdpe HD (International) |
2020–2022 |
| Polaris Ranger 570 Full Size |
2020 |
| Polaris Ranger 570 HD EPS |
2021 |
| Polaris Ranger 570 HD EPS ADC |
2022 |
| Polaris Ranger 570 Intl |
2023 |
| Polaris Ranger Crew 570 |
2021 |
| Polaris Ranger EV |
2020–2022 |
| Polaris Ranger EV Li Ion |
2016 |
| Polaris Ranger EV Liion |
2016 |
Why Choose a Genuine Polaris OEM Catch?
- Factory fit with the original bed, rack, box or frame
- Restores secure latching and load retention
- Keeps stored gear protected from water and dust
- Built for the rated cargo and towing use of the listed models
- Sold by Witchdoctors, with factory part numbers and parts diagrams for every Polaris model we support
Features and Materials
Key Features
- Genuine Polaris OEM part, part #1016942
- Original mounting points and hardware
- Made for the vibration and loads of work and trail use
- Corrosion-resistant finish or UV-stable plastic, depending on the part
- Works with factory latches, struts and Lock & Ride accessories where equipped
Materials and Construction
Polaris cargo and storage parts use high-strength steel for load-bearing brackets, racks and hitch parts, and impact-resistant, UV-stabilized plastics for boxes, bins and lids. Rubber seals help keep moisture out.
Common Reasons Riders Replace This Part
- Hauling tools, feed, firewood and equipment
- Towing within the rated limits for your model
- Keeping gear dry in factory storage
- Repairing a bed, tailgate or box after damage
Signs Your Catch Needs Replacing
- Tailgates or lids that will not stay latched
- Cracked bins, boxes or bed panels
- Bent or broken rack and hitch brackets
- Torn or missing seals that let water in
- Dump-bed latches or struts that no longer hold
Installation Tips
- Empty the bed or compartment and support lids or beds before removing parts.
- Use the Polaris parts diagram to identify fasteners and linkage.
- Remove the worn part and inspect nearby hinges, latches and brackets.
- Install with hardware finger-tight, check alignment, then torque to spec.
- Test latches, hinges and load security before carrying a full load.
Not sure whether to tackle it yourself? Read when to seek professional help or DIY before you start.
Polaris Parts Diagrams for Your Machine
Find part #1016942 and every part installed with it in the factory Polaris parts diagrams for your model:
Related OEM Parts for the Same Machines
Doing the job right? These genuine Polaris parts fit the same models and are often replaced at the same time:
Recommended Accessories and Maintenance Supplies
Pair your Catch with these parts and supplies:
Helpful Guides from the Witchdoctors Blog
Frequently Asked Questions
What is the OEM part number for this Polaris Catch?
The genuine Polaris part number is 1016942. Use it to match this part to your factory parts diagram.
Which Polaris models does part #1016942 fit?
It fits 17 Polaris Ranger models from 2016 to 2026. The complete list is in the fitment tables above.
Is this a genuine Polaris part?
Yes. This is a genuine Polaris OEM part, the same part number used at the factory, not an aftermarket copy.
Does this change my cargo or towing capacity?
No. Capacities are set by the manufacturer for your model. This part restores factory function only.
Will it fit aftermarket racks or accessories?
It is designed for the factory Polaris setup on the listed models. Aftermarket accessories may need their own hardware.
Should I replace the latch hardware too?
If the latch, striker or hinge is worn, replace it at the same time so the new part closes and holds properly.
Order Your Genuine Polaris Catch Today
Get your Ranger models back to factory condition. Add the genuine Polaris Catch, Left (part #1016942) to your cart today, and order the related parts above at the same time so you can finish the job in one go.
Where to Ride Your Polaris
Ready to put your machine to work? These off-road parks welcome both ATVs and UTVs. Check each park's current rules, vehicle-width limits and permit requirements before you go.