Genuine Polaris Front Rim 10Ga — OEM Part #1520263-117
The right wheel and tire keep your machine handling the way it was designed. The genuine Polaris Front Rim 10Ga is the factory size and specification for your Ranger, with the correct offset, bolt pattern and load rating.
Wheels, tires and their hardware carry the whole machine. The wrong size or offset affects handling, gearing, clearance and component wear. This part is confirmed for 1 Polaris model from 1999. See the full fitment list below.
Front Rim 10Ga at a Glance
-
OEM part number: 1520263-117
-
Brand: Polaris (genuine factory part)
-
Part type: OEM Wheel
-
Position: Front
-
Fits: Ranger utility side-by-side models, 1999
-
Condition: New
Polaris Models and Years This Front Rim 10Ga Fits
Genuine Polaris part #1520263-117 fits the models and years below. To be certain, match the part number to the factory parts diagram for your machine or contact us with your VIN before ordering.
Polaris Ranger utility side-by-side Fitment
| Model |
Model Years |
| Polaris Ranger |
1999 |
Why Choose a Genuine Polaris OEM Front Rim 10Ga?
- Factory size, offset and bolt pattern
- Keeps speedometer, gearing and clearance correct
- Matches the rest of the set
- Built for the weight and use of the listed models
- Sold by Witchdoctors, with factory part numbers and parts diagrams for every Polaris model we support
Features and Materials
Key Features
- Genuine Polaris OEM wheel or tire part, part #1520263-117
- Original size and specifications
- Factory finish or tread pattern
- Uses original lug nuts, caps and valve stems
- Made for mixed terrain
Materials and Construction
Polaris OEM wheels are cast aluminum or steel with a protective finish, and tires use off-road compounds and ply ratings chosen for the machine.
Common Reasons Riders Replace This Part
- Replacing a damaged wheel or tire
- Matching one tire to a set
- Carrying a factory-spec spare
- Restoring original fitment
Signs Your Front Rim 10Ga Needs Replacing
- Bent, cracked or dented rim
- Cuts, punctures or sidewall damage
- Worn or uneven tread
- Slow leaks at the bead or valve
- Missing or damaged center caps
Installation Tips
- Loosen lug nuts before lifting, then support the machine safely.
- Clean the hub face and studs.
- Tighten lug nuts in a star pattern.
- Torque to the Polaris spec and recheck after the first ride.
- Set pressure to the value in your owner's manual.
Not sure whether to tackle it yourself? Read when to seek professional help or DIY before you start.
Related OEM Parts for the Same Machines
Doing the job right? These genuine Polaris parts fit the same models and are often replaced at the same time:
Recommended Accessories and Maintenance Supplies
Pair your Front Rim 10Ga with these parts and supplies:
Helpful Guides from the Witchdoctors Blog
Frequently Asked Questions
What is the OEM part number for this Polaris Front Rim 10Ga?
The genuine Polaris part number is 1520263-117. Use it to match this part to your factory parts diagram.
Which Polaris models does part #1520263-117 fit?
It fits the Ranger (1999).
Is this a genuine Polaris part?
Yes. This is a genuine Polaris OEM part, the same part number used at the factory, not an aftermarket copy.
What tire pressure should I run?
Use the pressure in your owner's manual or on the machine label.
Can I mix a new tire with worn ones?
On AWD machines, mismatched tread can strain the drivetrain. Replace in pairs or sets.
Do I need new lug nuts?
Reuse good ones; replace damaged or rusted nuts and studs.
Order Your Genuine Polaris Front Rim 10Ga Today
Get your Ranger back to factory condition. Add the genuine Polaris Front Rim 10Ga (part #1520263-117) to your cart today, and order the related parts above at the same time so you can finish the job in one go.
Where to Ride Your Polaris
Ready to put your machine to work? These off-road parks welcome both ATVs and UTVs. Check each park's current rules, vehicle-width limits and permit requirements before you go.
-
Ride Royal Blue — Pioneer, Tennessee: a base camp for the 900+ mile North Cumberland trail network
-
Paiute ATV Trail — central Utah: 250 miles of marked trail linking to 2,000+ more