Winch Cable 710003441 by Can-Am

Genuine Can-Am Winch Cable — OEM Part #710003441

A winch you cannot trust is worse than no winch. The genuine Can-Am Winch Cable restores the factory winch system on your Commander 1000, matching the original mounts, wiring and controls.

Winch mounts, motors, contactors, controls and wiring carry very high loads and current. Every part has to be up to the job. This part is confirmed for 4 Can-Am models from 2014 to 2015. See the full fitment list below.

Winch Cable at a Glance

• OEM part number: 710003441
• Brand: Can-Am by BRP (genuine factory part)
• Part type: Winch Wiring Kit
• Fits: Commander crossover side-by-side models, 2014–2015
• Condition: New

Can-Am Models and Years This Winch Cable Fits

Genuine Can-Am part #710003441 fits the models and years below. To be certain, match the part number to the factory parts diagram for your machine or contact us with your VIN before ordering.

Can-Am Commander crossover side-by-side Fitment

Why Choose a Genuine Can-Am OEM Winch Cable?

• Factory fit with Can-Am winch mounts and wiring
• Correct electrical ratings for the winch circuit
• Weather-sealed for mud and water
• Restores dependable recovery
• Sold by Witchdoctors, with factory part numbers and parts diagrams for every Can-Am model we support

Features and Materials

Key Features

• Genuine Can-Am OEM winch part, part #710003441
• Original mounts, connectors and controls
• Designed for high-current loads
• Corrosion-resistant construction
• Fits the listed Can-Am models

Materials and Construction

Can-Am winch parts use high-strength steel mounts and fairleads, heavy-gauge copper power cable with sealed terminals, and sealed switches and contactors.

Common Reasons Riders Replace This Part

• Repairing a winch that clicks but will not pull
• Replacing damaged rope, fairleads or mounts
• Fixing broken switches or wiring
• Restoring a factory winch on a used machine

Signs Your Winch Cable Needs Replacing

• Winch clicks but does not turn
• Intermittent operation
• Frayed rope or a damaged fairlead
• Corroded or loose power terminals
• Bent or cracked mount

Installation Tips

1. Disconnect the battery first.
2. Use the Can-Am parts diagram for routing, terminals and mount hardware.
3. Clean terminals and use the correct cable size.
4. Torque mounting hardware and secure wiring away from heat.
5. Test in both directions under light load.

Not sure whether to tackle it yourself? Read when to seek professional help or DIY before you start.

Can-Am Parts Diagrams for Your Machine

Find part #710003441 and every part installed with it in the factory Can-Am parts diagrams for your model:

• 2015 Can-Am Commander MAX 1000 parts diagrams
• 2015 Can-Am Commander MAX 1000 DPS parts diagrams
• 2015 Can-Am Commander MAX 1000 LTD parts diagrams

Related OEM Parts for the Same Machines

Doing the job right? These genuine Can-Am parts fit the same models and are often replaced at the same time:

• Can-Am Winch Solenoid (#710004142)
• Can-Am Clevis Pin (#250400021)
• Can-Am Winch Switch (#710002052)
• Can-Am Winch (#705008547)
• Can-Am Winch Plate (#715000704)
• Can-Am Winch Connector (#710001023)

Recommended Accessories and Maintenance Supplies

Pair your Winch Cable with these parts and supplies:

• UTV winches — Complete winches
• Winch accessories — Fairleads, hooks and accessories
• Winch rope — Synthetic rope and cable
• WARN winches — WARN winches and parts
• Can-Am OEM parts diagrams — find every factory part for your model

Helpful Guides from the Witchdoctors Blog

• The Ultimate Guide to UTV/ATV Winches and Winch Accessories
• Why Your ATV/UTV Winch Solenoid Clicks | Diagnosis Guide
• The Ultimate Guide to UTV & ATV Tow Hooks
• Can-Am OEM vs. Aftermarket Parts: Which Is Better?

Frequently Asked Questions

What is the OEM part number for this Can-Am Winch Cable?

The genuine Can-Am part number is 710003441. Use it to match this part to your factory parts diagram.

Which Can-Am models does part #710003441 fit?

It fits the Commander MAX 1000 (2014–2015); Commander MAX 1000 DPS (2014–2015); Commander MAX 1000 LTD (2015); Commander MAX 1000 XT (2015).

Is this a genuine Can-Am part?

Yes. This is a genuine Can-Am OEM part from BRP, the same part number used at the factory, not an aftermarket copy.

Why does my winch just click?

Usually a weak battery, corroded connection or failing contactor. Test those first.

Can I use synthetic rope?

Usually yes, with a hawse fairlead instead of a roller fairlead.

Is the winch mount model-specific?

Yes. Use the fitment table to confirm.

Order Your Genuine Can-Am Winch Cable Today

Get your Commander 1000 back to factory condition. Add the genuine Can-Am Winch Cable (part #710003441) to your cart today, and order the related parts above at the same time so you can finish the job in one go.

• How long will it take to receive my order?
• Shipping and return policy
• Questions about fitment? Contact us
• Shop all Can-Am OEM parts

Where to Ride Your Can-Am

Ready to put your machine to work? These off-road parks welcome both ATVs and UTVs. Check each park's current rules, vehicle-width limits and permit requirements before you go.

• Turkey Bay OHV Area at Land Between the Lakes — Golden Pond, Kentucky: about 100 miles of trails
• Hatfield-McCoy Trails — southern West Virginia: multiple permit-access trail systems across the coalfields