Genuine Kawasaki Winch Hardware Kit — OEM Part #99996-Y003
A winch you cannot trust is worse than no winch. The genuine Kawasaki Winch Hardware Kit restores the factory winch system on your Mule PRO-MX, matching the original mounts, wiring and controls.
Winch mounts, motors, contactors, controls and wiring carry very high loads and current. Every part has to be up to the job. This part is confirmed for 2 Kawasaki models from 2022 to 2023. See the full fitment list below.
Winch Hardware Kit at a Glance
-
OEM part number: 99996-Y003
-
Brand: Kawasaki (genuine factory part)
-
Part type: Winch Hardware
-
Fits: Mule utility side-by-side models, 2022–2023
-
Condition: New
Kawasaki Models and Years This Winch Hardware Kit Fits
Genuine Kawasaki part #99996-Y003 fits the models and years below. To be certain, match the part number to the factory parts diagram for your machine or contact us with your VIN before ordering.
Kawasaki Mule utility side-by-side Fitment
| Model |
Model Years |
| Kawasaki Mule PRO-MX |
2022–2023 |
| Kawasaki Mule PRO-MX SE |
2022–2023 |
Why Choose a Genuine Kawasaki OEM Winch Hardware Kit?
- Factory fit with Kawasaki winch mounts and wiring
- Correct electrical ratings for the winch circuit
- Weather-sealed for mud and water
- Restores dependable recovery
- Sold by Witchdoctors, with factory part numbers and parts diagrams for every Kawasaki model we support
Features and Materials
Key Features
- Genuine Kawasaki OEM winch part, part #99996-Y003
- Original mounts, connectors and controls
- Designed for high-current loads
- Corrosion-resistant construction
- Fits the listed Kawasaki models
Materials and Construction
Kawasaki winch parts use high-strength steel mounts and fairleads, heavy-gauge copper power cable with sealed terminals, and sealed switches and contactors.
Common Reasons Owners Replace This Part
- Repairing a winch that clicks but will not pull
- Replacing damaged rope, fairleads or mounts
- Fixing broken switches or wiring
- Restoring a factory winch on a used machine
Signs Your Winch Hardware Kit Needs Replacing
- Winch clicks but does not turn
- Intermittent operation
- Frayed rope or a damaged fairlead
- Corroded or loose power terminals
- Bent or cracked mount
Installation Tips
- Disconnect the battery first.
- Use the Kawasaki parts diagram for routing, terminals and mount hardware.
- Clean terminals and use the correct cable size.
- Torque mounting hardware and secure wiring away from heat.
- Test in both directions under light load.
Not sure whether to tackle it yourself? Read when to seek professional help or DIY before you start.
Kawasaki Parts Diagrams for Your Machine
Find part #99996-Y003 and every part installed with it in the factory Kawasaki parts diagrams for your model:
Recommended Accessories and Maintenance Supplies
Pair your Winch Hardware Kit with these parts and supplies:
Helpful Guides from the Witchdoctors Blog
Frequently Asked Questions
What is the OEM part number for this Kawasaki Winch Hardware Kit?
The genuine Kawasaki part number is 99996-Y003. Use it to match this part to your factory parts diagram.
Which Kawasaki models does part #99996-Y003 fit?
It fits the Mule PRO-MX (2022–2023); Mule PRO-MX SE (2022–2023).
Is this a genuine Kawasaki part?
Yes. This is a genuine Kawasaki OEM part, the same part number used at the factory, not an aftermarket copy.
Why does my winch just click?
Usually a weak battery, corroded connection or failing contactor. Test those first.
Can I use synthetic rope?
Usually yes, with a hawse fairlead instead of a roller fairlead.
Is the winch mount model-specific?
Yes. Use the fitment table to confirm.
About Availability of Part #99996-Y003
This part is marked as no longer available. It may have been replaced by a newer part number. Contact our customer service team with your VIN and we will help you find the current replacement, or read more about parts that are no longer available.
Where to Ride Your Kawasaki
Ready to put your machine to work? These off-road parks welcome both ATVs and UTVs. Check each park's current rules, vehicle-width limits and permit requirements before you go.