Genuine Yamaha Winch Hook — OEM Part #BAS-F8488-02-00
A winch you cannot trust is worse than no winch. The genuine Yamaha Winch Hook restores the factory winch system on your Yamaha ATV or side-by-side, matching the original mounts, wiring and controls.
Winch mounts, motors, contactors, controls and wiring carry very high loads and current. Every part has to be up to the job. This part is confirmed for 43 Yamaha models from 2020 to 2026. See the full fitment list below.
Winch Hook at a Glance
-
OEM part number: BAS-F8488-02-00
-
Brand: Yamaha (genuine factory part)
-
Part type: Winch Accessory
-
Fits: Wolverine recreation side-by-side and YXZ pure-sport side-by-side models, 2020–2026
-
Condition: New
Yamaha Models and Years This Winch Hook Fits
Genuine Yamaha part #BAS-F8488-02-00 fits the models and years below. To be certain, match the part number to the factory parts diagram for your machine or contact us with your VIN before ordering.
This part is shared across 43 Yamaha model variants, so the table below groups them by model family. Your exact trim is listed in the parts diagrams linked further down.
Yamaha Wolverine recreation side-by-side Fitment
| Model Family |
Model Years |
Trims |
| Yamaha Wolverine |
2021–2022, 2024 |
5 |
| Yamaha Wolverine RMAX2 |
2021–2026 |
10 |
| Yamaha Wolverine RMAX4 |
2021–2026 |
11 |
| Yamaha Wolverine X2 |
2020–2026 |
9 |
| Yamaha Wolverine X4 |
2020–2026 |
6 |
Yamaha YXZ pure-sport side-by-side Fitment
| Model Family |
Model Years |
Trims |
| Yamaha YXZ1000R |
2020–2025 |
2 |
Why Choose a Genuine Yamaha OEM Winch Hook?
- Factory fit with Yamaha winch mounts and wiring
- Correct electrical ratings for the winch circuit
- Weather-sealed for mud and water
- Restores dependable recovery
- Sold by Witchdoctors, with factory part numbers and parts diagrams for every Yamaha model we support
Features and Materials
Key Features
- Genuine Yamaha OEM winch part, part #BAS-F8488-02-00
- Original mounts, connectors and controls
- Designed for high-current loads
- Corrosion-resistant construction
- Fits the listed Yamaha models
Materials and Construction
Yamaha winch parts use high-strength steel mounts and fairleads, heavy-gauge copper power cable with sealed terminals, and sealed switches and contactors.
Common Reasons Riders Replace This Part
- Repairing a winch that clicks but will not pull
- Replacing damaged rope, fairleads or mounts
- Fixing broken switches or wiring
- Restoring a factory winch on a used machine
Signs Your Winch Hook Needs Replacing
- Winch clicks but does not turn
- Intermittent operation
- Frayed rope or a damaged fairlead
- Corroded or loose power terminals
- Bent or cracked mount
Installation Tips
- Disconnect the battery first.
- Use the Yamaha parts diagram for routing, terminals and mount hardware.
- Clean terminals and use the correct cable size.
- Torque mounting hardware and secure wiring away from heat.
- Test in both directions under light load.
Not sure whether to tackle it yourself? Read when to seek professional help or DIY before you start.
Yamaha Parts Diagrams for Your Machine
Find part #BAS-F8488-02-00 and every part installed with it in the factory Yamaha parts diagrams for your model:
Related OEM Parts for the Same Machines
Doing the job right? These genuine Yamaha parts fit the same models and are often replaced at the same time:
Recommended Accessories and Maintenance Supplies
Pair your Winch Hook with these parts and supplies:
Helpful Guides from the Witchdoctors Blog
Frequently Asked Questions
What is the OEM part number for this Yamaha Winch Hook?
The genuine Yamaha part number is BAS-F8488-02-00. Use it to match this part to your factory parts diagram.
Which Yamaha models does part #BAS-F8488-02-00 fit?
It fits 43 Yamaha Wolverine and YXZ models from 2020 to 2026. The complete list is in the fitment tables above.
Is this a genuine Yamaha part?
Yes. This is a genuine Yamaha OEM part, the same part number used at the factory, not an aftermarket copy.
Why does my winch just click?
Usually a weak battery, corroded connection or failing contactor. Test those first.
Can I use synthetic rope?
Usually yes, with a hawse fairlead instead of a roller fairlead.
Is the winch mount model-specific?
Yes. Use the fitment table to confirm.
Order Your Genuine Yamaha Winch Hook Today
Get your Yamaha ATV or side-by-side back to factory condition. Add the genuine Yamaha Winch Hook (part #BAS-F8488-02-00) to your cart today, and order the related parts above at the same time so you can finish the job in one go.
Where to Ride Your Yamaha
Ready to put your machine to work? These off-road parks welcome both ATVs and UTVs. Check each park's current rules, vehicle-width limits and permit requirements before you go.