Genuine Can-Am Wiring Harness Winch — OEM Part #710009488
Be ready for recovery with a genuine Can-Am Wiring Harness Winch. Built for the Defender HD11 or Traxter HD11, it fits the factory winch mount and connects to the original wiring and controls.
Winch mounts, motors, contactors, controls and wiring carry very high loads and current. Every part has to be up to the job. This part is confirmed for 14 Can-Am models from 2026. See the full fitment list below.
Wiring Harness Winch at a Glance
-
OEM part number: 710009488
-
Brand: Can-Am by BRP (genuine factory part)
-
Part type: Winch Wiring Kit
-
Fits: Defender utility side-by-side and Traxter utility side-by-side models, 2026
-
Condition: New
Can-Am Models and Years This Wiring Harness Winch Fits
Genuine Can-Am part #710009488 fits the models and years below. To be certain, match the part number to the factory parts diagram for your machine or contact us with your VIN before ordering.
Can-Am Defender utility side-by-side Fitment
| Model |
Model Years |
| Can-Am Defender HD11 LTD Cab |
2026 |
| Can-Am Defender HD11 X mr |
2026 |
| Can-Am Defender HD11 XT |
2026 |
| Can-Am Defender HD11 XT Cab |
2026 |
| Can-Am Defender HD11 XU (International) |
2026 |
| Can-Am Defender MAX HD11 Lone Star |
2026 |
| Can-Am Defender MAX HD11 Lone Star Cab |
2026 |
| Can-Am Defender MAX HD11 LTD Cab |
2026 |
| Can-Am Defender MAX HD11 X mr |
2026 |
| Can-Am Defender MAX HD11 XT |
2026 |
| Can-Am Defender MAX HD11 XT Cab |
2026 |
Can-Am Traxter utility side-by-side Fitment
| Model |
Model Years |
| Can-Am Traxter HD11 XT (Europe) |
2026 |
| Can-Am Traxter HD11 XU (International) |
2026 |
| Can-Am Traxter MAX HD11 XU (International) |
2026 |
Why Choose a Genuine Can-Am OEM Wiring Harness Winch?
- Factory fit with Can-Am winch mounts and wiring
- Correct electrical ratings for the winch circuit
- Weather-sealed for mud and water
- Restores dependable recovery
- Sold by Witchdoctors, with factory part numbers and parts diagrams for every Can-Am model we support
Features and Materials
Key Features
- Genuine Can-Am OEM winch part, part #710009488
- Original mounts, connectors and controls
- Designed for high-current loads
- Corrosion-resistant construction
- Fits the listed Can-Am models
Materials and Construction
Can-Am winch parts use high-strength steel mounts and fairleads, heavy-gauge copper power cable with sealed terminals, and sealed switches and contactors.
Common Reasons Riders Replace This Part
- Repairing a winch that clicks but will not pull
- Replacing damaged rope, fairleads or mounts
- Fixing broken switches or wiring
- Restoring a factory winch on a used machine
Signs Your Wiring Harness Winch Needs Replacing
- Winch clicks but does not turn
- Intermittent operation
- Frayed rope or a damaged fairlead
- Corroded or loose power terminals
- Bent or cracked mount
Installation Tips
- Disconnect the battery first.
- Use the Can-Am parts diagram for routing, terminals and mount hardware.
- Clean terminals and use the correct cable size.
- Torque mounting hardware and secure wiring away from heat.
- Test in both directions under light load.
Not sure whether to tackle it yourself? Read when to seek professional help or DIY before you start.
Can-Am Parts Diagrams for Your Machine
Find part #710009488 and every part installed with it in the factory Can-Am parts diagrams for your model:
Related OEM Parts for the Same Machines
Doing the job right? These genuine Can-Am parts fit the same models and are often replaced at the same time:
Recommended Accessories and Maintenance Supplies
Pair your Wiring Harness Winch with these parts and supplies:
Helpful Guides from the Witchdoctors Blog
Frequently Asked Questions
What is the OEM part number for this Can-Am Wiring Harness Winch?
The genuine Can-Am part number is 710009488. Use it to match this part to your factory parts diagram.
Which Can-Am models does part #710009488 fit?
It fits 14 Can-Am Defender and Traxter models from 2026 to 2026. The complete list is in the fitment tables above.
Is this a genuine Can-Am part?
Yes. This is a genuine Can-Am OEM part from BRP, the same part number used at the factory, not an aftermarket copy.
Why does my winch just click?
Usually a weak battery, corroded connection or failing contactor. Test those first.
Can I use synthetic rope?
Usually yes, with a hawse fairlead instead of a roller fairlead.
Is the winch mount model-specific?
Yes. Use the fitment table to confirm.
Order Your Genuine Can-Am Wiring Harness Winch Today
Ride with confidence on parts built for your machine. Order the genuine Can-Am Wiring Harness Winch, OEM part #710009488, from Witchdoctors today and keep your Defender HD11 or Traxter HD11 running the way BRP designed it.
Where to Ride Your Can-Am
Ready to put your machine to work? These off-road parks welcome both ATVs and UTVs. Check each park's current rules, vehicle-width limits and permit requirements before you go.