Genuine Yamaha Yamaha Emblem — OEM Part #5UG-F153A-70-00
Bring back the factory finish on your Yamaha ATV or side-by-side with a genuine Yamaha Yamaha Emblem. Faded, peeled or torn graphics make a machine look older than it is and can hurt resale value, and this OEM decal matches the original color, shape and placement exactly.
Decals and labels do more than look good. Model graphics identify your machine, and warning labels carry safety and loading information that must stay legible. This part is confirmed for 9 Yamaha models from 2011 to 2013. See the full fitment list below.
Yamaha Emblem at a Glance
-
OEM part number: 5UG-F153A-70-00
-
Brand: Yamaha (genuine factory part)
-
Part type: OEM Decal
-
Fits: Big Bear utility ATV, Grizzly utility ATV and Rhino side-by-side models, 2011–2013
-
Condition: New
Yamaha Models and Years This Yamaha Emblem Fits
Genuine Yamaha part #5UG-F153A-70-00 fits the models and years below. To be certain, match the part number to the factory parts diagram for your machine or contact us with your VIN before ordering.
Yamaha Big Bear utility ATV Fitment
| Model |
Model Years |
| Yamaha Big Bear 400 4WD |
2011–2012 |
Yamaha Grizzly utility ATV Fitment
| Model |
Model Years |
| Yamaha Grizzly 350 2WD |
2011 |
| Yamaha Grizzly 350 4WD |
2011–2013 |
| Yamaha Grizzly 350 IRS 4WD |
2011 |
| Yamaha Grizzly 450 4WD |
2011–2013 |
| Yamaha Grizzly 550 4WD |
2012–2013 |
| Yamaha Grizzly 700 4WD |
2012–2013 |
Yamaha Rhino side-by-side Fitment
| Model |
Model Years |
| Yamaha Rhino 700 |
2011–2013 |
| Yamaha Rhino 700 1RBD |
2013 |
Why Choose a Genuine Yamaha OEM Yamaha Emblem?
- Exact factory color match, so it blends with the graphics around it
- Pre-cut to the original outline, with no trimming
- Correct placement for the specific panel it was designed for
- Keeps your machine looking original, which helps at resale or trade-in
- Sold by Witchdoctors, with factory part numbers and parts diagrams for every Yamaha model we support
Features and Materials
Key Features
- Genuine Yamaha OEM graphic, part #5UG-F153A-70-00
- UV-resistant inks made for outdoor powersports use
- Pressure-sensitive adhesive backing for a clean, bubble-free bond
- Sized and shaped for the original panel location
- Ready to apply. No paint, primer or special tools needed
Materials and Construction
Yamaha factory decals use a durable vinyl film with a protective top layer that resists sun fade, fuel splash, pressure washing and trail abrasion. The adhesive is designed to hold on curved plastic panels through heat cycles and vibration.
Common Reasons Riders Replace This Part
- Replacing graphics scratched or peeled by brush and roost
- Refreshing a machine before selling or trading it in
- Finishing a body panel replacement so it matches
- Replacing illegible safety or warning labels
Signs Your Yamaha Emblem Needs Replacing
- Edges lifting or peeling away from the panel
- Colors faded or chalky from sun exposure
- Tears, scuffs or missing sections
- A new panel installed without its matching graphic
- Warning information you can no longer read
Installation Tips
- Remove the old decal by warming it gently with a heat gun or hair dryer and peeling slowly.
- Clean off leftover adhesive, then wipe the area with isopropyl alcohol.
- Let the surface dry and work at room temperature (roughly 60–90°F).
- Peel back a small section of backing, align one edge, and press outward with a squeegee.
- Work across the decal to push out air, press the edges firmly and avoid pressure washing for 24–48 hours.
Not sure whether to tackle it yourself? Read when to seek professional help or DIY before you start.
Related OEM Parts for the Same Machines
Doing the job right? These genuine Yamaha parts fit the same models and are often replaced at the same time:
Recommended Accessories and Maintenance Supplies
Pair your Yamaha Emblem with these parts and supplies:
Helpful Guides from the Witchdoctors Blog
Frequently Asked Questions
What is the OEM part number for this Yamaha Yamaha Emblem?
The genuine Yamaha part number is 5UG-F153A-70-00. Use it to match this part to your factory parts diagram.
Which Yamaha models does part #5UG-F153A-70-00 fit?
It fits 9 Yamaha Big Bear, Grizzly and Rhino models from 2011 to 2013. The complete list is in the fitment tables above.
Is this a genuine Yamaha part?
Yes. This is a genuine Yamaha OEM part, the same part number used at the factory, not an aftermarket copy.
Will this decal match my other graphics?
Yes. It is the genuine Yamaha graphic for the listed models and years. Graphics on older machines may have faded slightly, so a new decal can look brighter at first.
Do I need to remove the panel to install it?
Usually not. Removing the panel can make cleaning and alignment easier on tight curves.
Can I apply it in cold weather?
For the best bond, apply it at room temperature. Warm the panel first if you are working in a cold garage.
Order Your Genuine Yamaha Yamaha Emblem Today
Get your Yamaha ATV or side-by-side back to factory condition. Add the genuine Yamaha Yamaha Emblem (part #5UG-F153A-70-00) to your cart today, and order the related parts above at the same time so you can finish the job in one go.
Where to Ride Your Yamaha
Ready to put your machine to work? These off-road parks welcome both ATVs and UTVs. Check each park's current rules, vehicle-width limits and permit requirements before you go.