Genuine Kawasaki Bracket — OEM Part #11055-0896
Keep the cab on your Teryx 750 tight, quiet and weather-resistant with a genuine Kawasaki Bracket. It is made to the exact dimensions of the original part, so it mounts to the factory points and works with the surrounding cab structure, doors and glass.
Cab parts keep riders protected and the cockpit sealed against dust, water and wind. A worn or damaged piece causes rattles, leaks and safety problems. This part is confirmed for 6 Kawasaki models from 2008 to 2013. See the full fitment list below.
Bracket at a Glance
-
OEM part number: 11055-0896
-
Brand: Kawasaki (genuine factory part)
-
Part type: Cab Frame
-
Fits: Teryx recreation side-by-side models, 2008–2013
-
Condition: New
Kawasaki Models and Years This Bracket Fits
Genuine Kawasaki part #11055-0896 fits the models and years below. To be certain, match the part number to the factory parts diagram for your machine or contact us with your VIN before ordering.
Kawasaki Teryx recreation side-by-side Fitment
| Model |
Model Years |
| Kawasaki Teryx 750 4x4 |
2008 |
| Kawasaki Teryx 750 4x4 LE |
2008 |
| Kawasaki Teryx 750 4x4 NRA Outdoors |
2008–2009 |
| Kawasaki Teryx 750 FI 4x4 |
2010–2013 |
| Kawasaki Teryx 750 FI 4x4 LE |
2009–2013 |
| Kawasaki Teryx 750 FI 4x4 Sport |
2009–2013 |
Why Choose a Genuine Kawasaki OEM Bracket?
- Factory fit with the ROPS, doors and roof
- Helps keep dust, water and wind out of the cockpit
- Restores proper door, window and latch operation
- Keeps the structure Kawasaki designed into the cab intact
- Sold by Witchdoctors, with factory part numbers and parts diagrams for every Kawasaki model we support
Features and Materials
Key Features
- Genuine Kawasaki OEM cab part, part #11055-0896
- Original dimensions and mounting points
- Works with factory seals, hinges, latches and hardware
- Matches the original finish
- Built for off-road vibration and flex
Materials and Construction
Kawasaki cab parts use materials matched to the job: coated steel for ROPS and structural parts, UV-stabilized plastics for trim and door panels, and weather-resistant rubber for seals and channels.
Common Reasons Owners Replace This Part
- Repairing a cab after a rollover or impact
- Fixing doors that rattle, sag or will not latch
- Sealing out dust and water on a cab-equipped machine
- Restoring a machine to factory condition
Signs Your Bracket Needs Replacing
- Doors or windows that rattle, sag or will not close
- Water or dust getting into the cab
- Bent, cracked or broken parts after an impact
- Torn, flattened or hardened seals
- Corrosion or broken welds on ROPS parts
Installation Tips
- Pull up the Kawasaki parts diagram for the cab to see how the part fits.
- Support doors, glass or the roof before loosening hardware.
- Clean mounting surfaces and check nearby parts for damage.
- Install with bolts finger-tight, check alignment and door gaps, then tighten to spec.
- Test doors, latches and windows, and check for leaks with a light water spray.
Not sure whether to tackle it yourself? Read when to seek professional help or DIY before you start.
Related OEM Parts for the Same Machines
Doing the job right? These genuine Kawasaki parts fit the same models and are often replaced at the same time:
Recommended Accessories and Maintenance Supplies
Pair your Bracket with these parts and supplies:
Helpful Guides from the Witchdoctors Blog
Frequently Asked Questions
What is the OEM part number for this Kawasaki Bracket?
The genuine Kawasaki part number is 11055-0896. Use it to match this part to your factory parts diagram.
Which Kawasaki models does part #11055-0896 fit?
It fits the Teryx 750 4x4 (2008); Teryx 750 4x4 LE (2008); Teryx 750 4x4 NRA Outdoors (2008–2009); Teryx 750 FI 4x4 (2010–2013); Teryx 750 FI 4x4 LE (2009–2013); Teryx 750 FI 4x4 Sport (2009–2013).
Is this a genuine Kawasaki part?
Yes. This is a genuine Kawasaki OEM part, the same part number used at the factory, not an aftermarket copy.
Will this fit a cab with aftermarket doors or windows?
It is designed for the factory Kawasaki cab on the listed models. Aftermarket doors and glass may use different mounting points.
Do I need special tools?
Most cab parts install with hand tools. Large panels, doors and glass are much easier with a helper.
Can a bent ROPS part be straightened?
No. Bent or cracked structural parts should be replaced, not straightened. Have the cab inspected before riding again.
Order Your Genuine Kawasaki Bracket Today
Work and ride with confidence on parts built for your machine. Order the genuine Kawasaki Bracket, OEM part #11055-0896, from Witchdoctors today and keep your Teryx 750 running the way Kawasaki designed it.
Where to Ride Your Kawasaki
Ready to put your machine to work? These off-road parks welcome both ATVs and UTVs. Check each park's current rules, vehicle-width limits and permit requirements before you go.