Genuine Polaris Brake Light Switch — OEM Part #2206566
Nothing matters more on a steep descent than brakes you can trust. The genuine Polaris Brake Light Switch restores factory braking on your Polaris ATV or side-by-side, matching the original fittings, dimensions and hydraulic specification.
Lines, calipers, master cylinders, pads, rotors and parking brakes work as one hydraulic and mechanical system. A leak, worn part or wrong fitting leads to a soft pedal or brake failure. This part is confirmed for 50 Polaris models from 2017 to 2026. See the full fitment list below.
Brake Light Switch at a Glance
-
OEM part number: 2206566
-
Brand: Polaris (genuine factory part)
-
Part type: Brake Light Switch
-
Fits: Scrambler ATV and Sportsman ATV models, 2017–2026
-
Condition: New
Polaris Models and Years This Brake Light Switch Fits
Genuine Polaris part #2206566 fits the models and years below. To be certain, match the part number to the factory parts diagram for your machine or contact us with your VIN before ordering.
This part is shared across 50 Polaris model variants, so the table below groups them by model family. Your exact trim is listed in the parts diagrams linked further down.
Polaris Scrambler ATV Fitment
| Model Family |
Model Years |
Trims |
| Polaris Scrambler 1000 |
2018–2019 |
2 |
| Polaris Scrambler XP |
2018, 2020–2025 |
3 |
Polaris Sportsman ATV Fitment
| Model Family |
Model Years |
Trims |
| Polaris Sportsman 570 |
2018–2023 |
13 |
| Polaris Sportsman 850 |
2021–2026 |
8 |
| Polaris Sportsman 1000 |
2019, 2025–2026 |
4 |
| Polaris Sportsman Touring |
2018–2025 |
6 |
| Polaris Sportsman XP |
2017–2018, 2020–2026 |
14 |
Why Choose a Genuine Polaris OEM Brake Light Switch?
- Factory hydraulic specification for proper feel
- Direct fit with original calipers, lines and mounts
- Built for the heat and contamination of off-road braking
- Restores safe, predictable stopping
- Sold by Witchdoctors, with factory part numbers and parts diagrams for every Polaris model we support
Features and Materials
Key Features
- Genuine Polaris OEM brake part, part #2206566
- Original fittings, banjo bolts and mounting points
- Built to Polaris's brake system specification
- Designed for mud, water and steep terrain
- Works with the DOT fluid specified in your manual
Materials and Construction
Polaris brake parts use reinforced brake hose, steel lines and fittings, aluminum caliper and master-cylinder bodies with DOT-compatible seals, and steel rotors and friction pads designed for off-road use.
Common Reasons Riders Replace This Part
- Fixing a soft, spongy or sinking pedal
- Replacing leaking lines, calipers or master cylinders
- Replacing worn pads and rotors
- Restoring a parking brake that will not hold
Signs Your Brake Light Switch Needs Replacing
- Spongy pedal or lever, or one that sinks
- Brake fluid leaks
- Grinding, squealing or pulling to one side
- Scored, warped or thin rotors
- A parking brake that will not hold on a slope
Installation Tips
- Use the Polaris parts diagram to confirm fittings, crush washers and routing.
- Protect painted surfaces from fluid and cap open lines.
- Install with new crush washers on banjo fittings and torque to spec.
- Refill with fresh DOT fluid of the specified type and bleed fully.
- Test brake feel and function at low speed before riding normally.
Not sure whether to tackle it yourself? Read when to seek professional help or DIY before you start.
Polaris Parts Diagrams for Your Machine
Find part #2206566 and every part installed with it in the factory Polaris parts diagrams for your model:
Related OEM Parts for the Same Machines
Doing the job right? These genuine Polaris parts fit the same models and are often replaced at the same time:
Recommended Accessories and Maintenance Supplies
Pair your Brake Light Switch with these parts and supplies:
Helpful Guides from the Witchdoctors Blog
Frequently Asked Questions
What is the OEM part number for this Polaris Brake Light Switch?
The genuine Polaris part number is 2206566. Use it to match this part to your factory parts diagram.
Which Polaris models does part #2206566 fit?
It fits 50 Polaris Scrambler and Sportsman models from 2017 to 2026. The complete list is in the fitment tables above.
Is this a genuine Polaris part?
Yes. This is a genuine Polaris OEM part, the same part number used at the factory, not an aftermarket copy.
What brake fluid should I use?
Use the DOT type in your Polaris owner's manual or on the reservoir cap. Never mix DOT 5 silicone with DOT 3, 4 or 5.1.
Do I need to bleed the brakes?
Yes, any time the hydraulic system is opened.
Should I replace rotors with pads?
Not always. Measure thickness and check for scoring or warping against the minimum spec.
Order Your Genuine Polaris Brake Light Switch Today
Get your Polaris ATV or side-by-side back to factory condition. Add the genuine Polaris Brake Light Switch (part #2206566) to your cart today, and order the related parts above at the same time so you can finish the job in one go.
Where to Ride Your Polaris
Ready to put your machine to work? These off-road parks welcome both ATVs and UTVs. Check each park's current rules, vehicle-width limits and permit requirements before you go.