Whether you’re doing routine service or upgrading, the Drag Specialties Semi-Metallic Front Brake Pads (1721-2255) gives you dependable Drag Specialties quality at a fair price.
Witchdoctors stocks genuine Drag Specialties parts by part number. Review the fitment and details below, and contact our team with any questions before you order.
Why Choose the Semi-Metallic Front Brake Pads
Brakes are the most important safety system on your bike. Fresh pads and fluid restore strong, predictable stopping power, and Drag Specialties offers compounds to suit how you ride: organic for smooth, rotor-friendly braking; sintered for maximum bite and fade resistance; and semi-metallic for a balance of both.
Key Benefits
- Semi-metallic (semi-sintered) front brake pads
- Balanced bite, rotor life and low noise
- Consistent performance hot or cold
- Backed by Drag Specialties, a leading V-twin aftermarket brand
- Sold by Witchdoctors, Indian and Victory specialists
Features and Specifications
- Semi-metallic (semi-sintered) front brake pads
- Balanced bite, rotor life and low noise
- Consistent performance hot or cold
Product Details
-
Brand: Drag Specialties
-
Part number: 1721-2255
-
Product type: front brake pads
About Drag Specialties
Drag Specialties has supplied V-twin riders with replacement and performance parts for decades, from brake pads and ignition components to seats, mirrors and garage tools. Its catalog is built around fitment accuracy and value, which is why so many shops and riders rely on it. Witchdoctors carries Drag Specialties parts for Indian and Victory motorcycles so you can service and upgrade your bike with confidence.
Fitment and Compatibility
Fits (models and years):
- Victory steel-frame cruisers 2008–2017: Vegas, Kingpin, Hammer, Jackpot, Highball, Boardwalk, Judge and Gunner
- Victory Cross Country, Cross Roads, Cross Country Tour, Hardball, Magnum and X1 2010–2017
- Indian Chief, Chieftain, Roadmaster and Springfield (Thunder Stroke 111) 2014–2018
- Indian Scout and Scout Sixty 2015–2018, and Scout Bobber 2018
Fitment is model-specific. Confirm your model and year before ordering, and contact us if your bike isn’t listed.
Best Uses
- Routine brake service
- Upgrading stopping power for touring or two-up riding
- Restoring feel after worn or glazed pads
Installation
- Support the bike securely and note how the old pads are installed.
- Remove the caliper or pad pins and take out the old pads.
- Push the pistons back carefully, watching the fluid level.
- Install the new pads and any shims, then reinstall pins and caliper hardware to torque spec.
- Pump the lever until firm, check fluid, and bed in the pads with several moderate stops.
Follow your service manual for torque specs. If you’re not comfortable doing the work, have a qualified technician install it.
Pro Tip
Bed in new pads before hard riding: make several moderate stops from about 30 mph without coming to a complete stop to transfer an even layer of pad material to the rotor.
How to Choose the Right Brake pads
Start with your rotors and riding style. Organic (Kevlar) pads are the quietest and kindest to polished or chrome rotors, and they’re a good choice for relaxed cruising. Sintered metallic pads deliver the strongest bite and resist fade on long descents, in the rain and when riding two-up, but they need rotors rated for sintered pads. Semi-metallic pads sit in the middle, with good bite, reasonable rotor wear and low noise. Whatever you choose, use the same type front and rear for balanced braking, replace pads in axle sets, and change your DOT 4 fluid every two years, because brake fluid absorbs moisture that lowers its boiling point and causes a soft lever.
Troubleshooting Signs It’s Time to Replace
- Squealing, grinding or scraping when braking
- A soft or spongy lever or pedal
- Longer stopping distances
- Pads worn to about 1mm of friction material
- Dark brake fluid or fluid older than two years
If you notice any of these, inspect the system and replace worn parts before your next ride.
Care and Maintenance
Inspect the part at every service, keep it clean, and replace it if it shows wear or damage.
Pair It With
Shop more Drag Specialties brake pads, Indian and Victory brake pads, and brakes, rotors and lines.
Helpful Guides From the Witchdoctors Blog
Frequently Asked Questions
Organic, sintered or semi-metallic?
Organic pads are quiet and gentle on rotors. Sintered pads have the strongest bite and best fade resistance. Semi-metallic pads balance both. Use what your rotors are rated for.
How do I know when to replace pads?
Replace them when the friction material is about 1mm thick, or if you notice grinding, noise or reduced stopping power.
Is this a genuine Drag Specialties part?
Yes. Witchdoctors sells genuine Drag Specialties parts by part number.
Will it fit my bike?
Check the fitment section above. If your bike isn’t listed, contact us before ordering.
What if it doesn’t fit?
Contact our customer service team before installing anything, and we’ll help with fitment questions and returns under our return policy.
Where to Ride
Finish the job, then ride somewhere worth the trip:
Order the Semi-Metallic Front Brake Pads Today
Add the Drag Specialties Semi-Metallic Front Brake Pads (1721-2255) to your cart, and Witchdoctors will ship it fast. Questions? Contact our team and we’ll help you choose.
General Safety Warning & Installation Requirements
Your safety is our top priority. Whether you are maintaining a Victory® or Indian® Motorcycle,
or servicing a UTV, ATV, or Side-by-Side, proper installation is vital to the performance and safety
of your vehicle.
Important:
⚠️
Warning: Failure to follow manufacturer-specified installation procedures and
safety requirements can result in mechanical failure, loss of vehicle control, serious injury, or death.
Important Fitment Disclosure
At Witchdoctors, we want to ensure you get back on the road or trail as quickly as possible. Correct fitment
is the most critical step in purchasing parts for your Victory® or Indian® Motorcycle. Also for your
Polaris®, CFMoto®, Arctic Cat®, Yamaha®, Honda®, Can-Am®, Kawasaki® UTV and ATV.
⚠️
Verification Required: While we strive for 100% accuracy, vehicle manufacturers often
make mid-year production changes. Always verify your specific year, make, and model before finalizing
your order.
Read More
Shipping
Qualifying Retail orders $159.99 or more will receive free ground shipping. Free Shipping Terms and conditions.
All orders over $500 will require a signature.
Please see International Shipping page for orders shipping outside the US.
See our full Shipping Policy page for further details.
Product Availability
We show real time product availability. These products normally ship the same business day but may ship from one of our warehouses across the country. If an item requires additional processing time you will be notified.
Returns
If your order arrives and it is not right, we will we'll fix it. We promise!
Doesn't fit or just not happy with it? You can return any new, unopened, unused or unaltered item within 30 days of delivery receipt of your item. We will issue a refund to your original payment method.
See our full Return Policy for all of the pertinent details.
NOTE: All brake pads are sold in a set for one disc. You must order one set for each disc on your motorcycle