Genuine Indian License Plate Bracket Stiffener — OEM Part #5910679
Keep your Indian Chieftain solid and straight with a genuine Indian License Plate Bracket Stiffener. It is made to Indian's original dimensions, so engine, suspension and bodywork bolt back on in alignment.
Frames, engine cradles, mounts, kickstands and footrest mounts carry the engine and rider loads. A bent or cracked part affects handling and safety. This part is confirmed for 3 Indian models for 2019.
License Plate Bracket Stiffener at a Glance
-
OEM part number: 5910679
-
Brand: Indian (genuine Polaris-made OEM part)
-
Part type: License Plate Mount
-
Indian fitment: Chieftain, 2019
-
Condition: New
Models and Years This License Plate Bracket Stiffener Fits
Genuine part #5910679 fits the models and years below. To be certain, match the part number to the factory parts diagram for your machine or contact us with your VIN before ordering.
Indian Motorcycle Fitment
| Model |
Model Years |
| Indian Chieftain |
2019 |
| Indian Chieftain Dark Horse |
2019 |
| Indian Chieftain Limited |
2019 |
Why Choose a Genuine Indian OEM License Plate Bracket Stiffener?
- Factory geometry and alignment
- Original mounting points for engine and bodywork
- Correct isolators and bushings to control vibration
- Restores safe, stable handling
- Sold by Witchdoctors, an Indian and Victory OEM parts specialist
Features and Materials
Key Features
- Genuine Indian OEM frame or mount part, part #5910679
- Original dimensions and hardware locations
- Corrosion-resistant finish
- Designed for the listed Indian models
- Works with factory isolators and fasteners
Materials and Construction
Indian frames and mounts use welded steel or cast aluminum with powder-coat or e-coat finishes, plus rubber isolators where vibration control matters.
Common Reasons Riders Replace This Part
- Repairs after a crash or tip-over
- Replacing a bent kickstand or mount
- Replacing worn engine mounts or isolators
- Restoring a bike with frame damage
Signs Your License Plate Bracket Stiffener Needs Replacing
- Bent kickstand or bike leaning too far
- Excess vibration from worn mounts
- Cracks or bends after an impact
- Misaligned bodywork or wheels
- Loose or missing mounting hardware
Installation Tips
- Support the bike and engine safely before removing mounts.
- Follow the Indian service manual for torque specs and sequence.
- Replace isolators and hardware as specified.
- Check alignment of wheels and bodywork after installation.
- Recheck torque after the first ride.
Not sure whether to tackle it yourself? Read when to seek professional help or DIY before you start.
Parts Diagrams for Your Bike
Find part #5910679 and every part installed with it in the factory parts diagrams for your model:
Related OEM Parts for the Same Bikes
Doing the job right? These genuine parts fit the same models and are often replaced at the same time:
Recommended Accessories and Maintenance Supplies
Pair your License Plate Bracket Stiffener with these parts and supplies:
Helpful Guides from the Witchdoctors Blog
Frequently Asked Questions
What is the OEM part number for this Indian License Plate Bracket Stiffener?
The genuine part number is 5910679. Use it to match this part to your factory parts diagram.
Which Indian motorcycles does part #5910679 fit?
It fits the Indian Chieftain (2019); Indian Chieftain Dark Horse (2019); Indian Chieftain Limited (2019).
Is this a genuine OEM part?
Yes. This is a genuine Polaris-made OEM part, the same part number used at the factory for Indian models, not an aftermarket copy.
Is my kickstand bent?
If the bike leans much farther than usual, it may be. Our blog has a diagnostic guide.
Can a bent frame be straightened?
Frame repair needs a specialist and a frame jig. Replacing damaged parts is safer.
Do I need new hardware?
Replace any fastener that was stretched, corroded or specified as one-time-use.
Order Your Genuine Indian License Plate Bracket Stiffener Today
Keep your Indian motorcycle on the road. Add the genuine Indian License Plate Bracket Stiffener (part #5910679) to your cart today, and order the related parts above at the same time so you can finish the job in one go.
Where to Ride Your Indian
Put fresh parts to work on two of America's great motorcycle roads. Check road conditions, seasonal closures and park rules before you go.
-
Natchez Trace Parkway — Mississippi, Alabama & Tennessee: 444 miles with no commercial trucks
-
Mohawk Trail — Massachusetts: a historic Berkshires route with hairpin views