Genuine Polaris Tilt Steering Bushing — OEM Part #5439154
Steer with confidence again with a genuine Polaris Tilt Steering Bushing. Built for the Polaris ATV or side-by-side, it matches the factory splines, joints and mounting points, so the steering feels tight and works with Polaris EPS where equipped.
The steering wheel or handlebar, column, rack, tie rods and power steering unit all affect control. Play or binding in any one part shows up as vague or heavy steering. This part is confirmed for 30 Polaris models from 2013 to 2019. See the full fitment list below.
Tilt Steering Bushing at a Glance
-
OEM part number: 5439154
-
Brand: Polaris (genuine factory part)
-
Part type: Steering Column
-
Fits: ACE single-seat, Ranger utility side-by-side and Sportsman ATV models, 2013–2019
-
Condition: New
Polaris Models and Years This Tilt Steering Bushing Fits
Genuine Polaris part #5439154 fits the models and years below. To be certain, match the part number to the factory parts diagram for your machine or contact us with your VIN before ordering.
Polaris ACE single-seat Fitment
| Model |
Model Years |
| Polaris ACE 325 EFI |
2016 |
| Polaris ACE 500 Sohc |
2017–2019 |
| Polaris ACE 570 |
2018–2019 |
| Polaris ACE 570 EFI |
2016–2017 |
| Polaris ACE 570 EFI Euro (International) |
2016–2018 |
| Polaris ACE 570 EFI HD (International) |
2016 |
| Polaris ACE 570 EFI MD (International) |
2016 |
| Polaris ACE 570 EFI Ps HD (International) |
2018–2019 |
| Polaris ACE 570 HD EFI (International) |
2017 |
| Polaris ACE 570 SP |
2017 |
| Polaris ACE 900 EFI EPS |
2016 |
| Polaris ACE 900 EPS XC |
2017–2019 |
Polaris Ranger utility side-by-side Fitment
| Model |
Model Years |
| Polaris Ranger 570 Full Size |
2015 |
| Polaris Ranger 900 Crew |
2014 |
| Polaris Ranger 900 XP |
2013 |
| Polaris Ranger Crew 570 EFI Full Size |
2015 |
| Polaris Ranger Crew 570 Full Size |
2015 |
| Polaris Ranger Crew 900 |
2014 |
| Polaris Ranger Crew 900 EPS |
2014 |
| Polaris Ranger XP 900 |
2013–2014 |
| Polaris Ranger XP 900 Deluxe |
2014 |
| Polaris Ranger XP 900 EPS |
2014 |
Polaris Sportsman ATV Fitment
| Model |
Model Years |
| Polaris Sportsman ACE |
2014 |
| Polaris Sportsman ACE 325 EFI |
2015 |
| Polaris Sportsman ACE 325 Euro (International) |
2015 |
| Polaris Sportsman ACE 325 HD (International) |
2015 |
| Polaris Sportsman ACE 570 EFI |
2015 |
| Polaris Sportsman ACE 570 Euro (International) |
2015 |
| Polaris Sportsman ACE 570 HD (International) |
2015 |
| Polaris Sportsman ACE Euro (International) |
2014 |
Why Choose a Genuine Polaris OEM Tilt Steering Bushing?
- Factory fit with the rack, column and linkage
- Restores tight, precise steering
- Works with Polaris EPS where equipped
- Helps keep alignment and tire wear in check
- Sold by Witchdoctors, with factory part numbers and parts diagrams for every Polaris model we support
Features and Materials
Key Features
- Genuine Polaris OEM steering part, part #5439154
- Original splines, threads and joints
- Corrosion- and impact-resistant construction
- Designed for the listed Polaris models
- Works with factory power steering units, sensors and wiring where applicable
Materials and Construction
Polaris steering parts use hardened steel shafts, racks and tie-rod ends with sealed joints, aluminum or steel housings, and sealed power steering motors and modules built for water and vibration.
Common Reasons Riders Replace This Part
- Fixing play, clunks or wandering
- Replacing bent tie rods or shafts after an impact
- Repairing power steering faults or heavy steering
- Restoring steering on a high-hour machine
Signs Your Tilt Steering Bushing Needs Replacing
- Free play in the steering
- Clunking when turning
- Heavy steering or a power steering warning
- Bent tie rods or an off-center wheel
- Torn boots on tie-rod ends or the rack
Installation Tips
- Point the wheels straight before disconnecting parts.
- Use the Polaris parts diagram for hardware, cotter pins and power steering connectors.
- Disconnect the battery before working on power steering parts.
- Match the original spline position or tie-rod length.
- Torque to spec, set toe and check lock-to-lock travel.
Not sure whether to tackle it yourself? Read when to seek professional help or DIY before you start.
Polaris Parts Diagrams for Your Machine
Find part #5439154 and every part installed with it in the factory Polaris parts diagrams for your model:
Related OEM Parts for the Same Machines
Doing the job right? These genuine Polaris parts fit the same models and are often replaced at the same time:
Recommended Accessories and Maintenance Supplies
Pair your Tilt Steering Bushing with these parts and supplies:
Helpful Guides from the Witchdoctors Blog
Frequently Asked Questions
What is the OEM part number for this Polaris Tilt Steering Bushing?
The genuine Polaris part number is 5439154. Use it to match this part to your factory parts diagram.
Which Polaris models does part #5439154 fit?
It fits 30 Polaris ACE, Ranger and Sportsman models from 2013 to 2019. The complete list is in the fitment tables above.
Is this a genuine Polaris part?
Yes. This is a genuine Polaris OEM part, the same part number used at the factory, not an aftermarket copy.
Do I need an alignment after steering work?
Yes. Set toe to prevent wander and tire wear.
Does power steering need a reset after service?
Some systems need a reset or calibration. Check your service manual or ask a dealer.
Can a bent steering part be straightened?
No. Always replace bent steering parts.
Order Your Genuine Polaris Tilt Steering Bushing Today
Ride with confidence on parts built for your machine. Order the genuine Polaris Tilt Steering Bushing, OEM part #5439154, from Witchdoctors today and keep your Polaris ATV or side-by-side running the way Polaris designed it.
Where to Ride Your Polaris
Ready to put your machine to work? These off-road parks welcome both ATVs and UTVs. Check each park's current rules, vehicle-width limits and permit requirements before you go.