Genuine Polaris Rear Cab Support Weldment, Matte Black — OEM Part #1021194-458
Keep the cab on your Ranger models tight, quiet and weather-resistant with a genuine Polaris Rear Cab Support Weldment, Matte Black. It is made to the exact dimensions of the original part, so it mounts to the factory points and works with the surrounding cab structure, doors and glass.
Cab parts keep riders protected and the cockpit sealed against dust, water and wind. A worn or damaged piece causes rattles, leaks and safety problems. This part is confirmed for 58 Polaris models from 2015 to 2026. See the full fitment list below.
Rear Cab Support Weldment, Matte Black at a Glance
-
OEM part number: 1021194-458
-
Brand: Polaris (genuine factory part)
-
Part type: Cab Frame
-
Position: Rear
-
Color: Matte Black
-
Fits: Ranger utility side-by-side models, 2015–2026
-
Condition: New
Polaris Models and Years This Rear Cab Support Weldment Fits
Genuine Polaris part #1021194-458 fits the models and years below. To be certain, match the part number to the factory parts diagram for your machine or contact us with your VIN before ordering.
This part is shared across 58 Polaris model variants, so the table below groups them by model family. Your exact trim is listed in the parts diagrams linked further down.
Polaris Ranger utility side-by-side Fitment
| Model Family |
Model Years |
Trims |
| Polaris Ranger |
2015, 2023 |
1 |
| Polaris Ranger 48V |
2020–2022 |
2 |
| Polaris Ranger 500 |
2017–2022, 2026 |
8 |
| Polaris Ranger 530 |
2023–2025 |
1 |
| Polaris Ranger 570 |
2015–2026 |
39 |
| Polaris Ranger ETX |
2015–2016 |
1 |
| Polaris Ranger EV |
2015–2022 |
4 |
| Polaris Ranger MS |
2025–2026 |
2 |
Why Choose a Genuine Polaris OEM Rear Cab Support Weldment?
- Factory fit with the cage, doors and roof
- Helps keep dust, water and wind out of the cockpit
- Restores proper door, window and latch operation
- Keeps the structure designed into the cab intact
- Sold by Witchdoctors, with factory part numbers and parts diagrams for every Polaris model we support
Features and Materials
Key Features
- Genuine Polaris OEM cab part, part #1021194-458
- Original dimensions and mounting points
- Works with factory seals, hinges, latches and hardware
- Matches the original finish
- Built for off-road vibration and flex
Materials and Construction
Polaris cab parts use materials matched to the job: coated steel for cage and structural parts, UV-stabilized plastics for trim and door panels, and weather-resistant rubber for seals and channels.
Common Reasons Riders Replace This Part
- Repairing a cab after a rollover or impact
- Fixing doors that rattle, sag or will not latch
- Sealing out dust and water on a cab-equipped machine
- Restoring a machine to factory condition
Signs Your Rear Cab Support Weldment Needs Replacing
- Doors or windows that rattle, sag or will not close
- Water or dust getting into the cab
- Bent, cracked or broken parts after an impact
- Torn, flattened or hardened seals
- Corrosion or broken welds on cage parts
Installation Tips
- Pull up the Polaris parts diagram for the cab to see how the part fits.
- Support doors, glass or the roof before loosening hardware.
- Clean mounting surfaces and check nearby parts for damage.
- Install with bolts finger-tight, check alignment and door gaps, then tighten to spec.
- Test doors, latches and windows, and check for leaks with a light water spray.
Not sure whether to tackle it yourself? Read when to seek professional help or DIY before you start.
Polaris Parts Diagrams for Your Machine
Find part #1021194-458 and every part installed with it in the factory Polaris parts diagrams for your model:
Related OEM Parts for the Same Machines
Doing the job right? These genuine Polaris parts fit the same models and are often replaced at the same time:
Recommended Accessories and Maintenance Supplies
Pair your Rear Cab Support Weldment with these parts and supplies:
Helpful Guides from the Witchdoctors Blog
Frequently Asked Questions
What is the OEM part number for this Polaris Rear Cab Support Weldment?
The genuine Polaris part number is 1021194-458. Use it to match this part to your factory parts diagram.
Which Polaris models does part #1021194-458 fit?
It fits 58 Polaris Ranger models from 2015 to 2026. The complete list is in the fitment tables above.
Is this a genuine Polaris part?
Yes. This is a genuine Polaris OEM part, the same part number used at the factory, not an aftermarket copy.
Will this fit a cab with aftermarket doors or windows?
It is designed for the factory Polaris cab on the listed models. Aftermarket doors and glass may use different mounting points.
Do I need special tools?
Most cab parts install with hand tools. Large panels, doors and glass are much easier with a helper.
Can a bent ROPS or cage part be straightened?
No. Bent or cracked structural parts should be replaced, not straightened. Have the cab inspected before riding again.
Order Your Genuine Polaris Rear Cab Support Weldment Today
Ride with confidence on parts built for your machine. Order the genuine Polaris Rear Cab Support Weldment, Matte Black, OEM part #1021194-458, from Witchdoctors today and keep your Ranger models running the way Polaris designed it.
Where to Ride Your Polaris
Ready to put your machine to work? These off-road parks welcome both ATVs and UTVs. Check each park's current rules, vehicle-width limits and permit requirements before you go.
-
Windrock Park — Oliver Springs, Tennessee: 300+ miles of mountain trails
-
Ride Royal Blue — Pioneer, Tennessee: a base camp for the 900+ mile North Cumberland trail network