Genuine Victory Camshaft Set Stock Kingpin — OEM Part #3021660
Bring your Freedom V-twin back to factory spec with the genuine Victory Victory Camshaft Set Stock Kingpin, Polaris part #3021660. It is the OEM engine part for the Victory Jackpot, Hammer and other cruiser models.
Internal engine parts and seals set compression, valve timing and oil control. Worn parts cost power, burn oil or cause leaks. This part is confirmed for 4 Victory models from 2006 to 2008. See the full fitment list below.
Availability note: Polaris lists this part as discontinued or no longer available. Stock may be limited. See what to do when a part is no longer available or browse hard-to-find Victory parts.
Victory Camshaft Set Stock Kingpin at a Glance
-
OEM part number: 3021660
-
Brand: Victory Motorcycles (genuine Polaris OEM part)
-
Part type: Camshaft
-
Fits: Victory Cruiser models, 2006–2008
-
Condition: Used genuine OEM (factory take-off)
Victory Models and Years This Camshaft Set Stock Kingpin Fits
Genuine Victory part #3021660 fits the models and years below. To be certain, match the part number to the factory parts diagram for your bike, or decode your VIN with our Victory VIN decoder before ordering.
Victory Cruiser Fitment
| Model |
Model Years |
| Victory Jackpot |
2006–2008 |
| Victory Hammer |
2007–2008 |
| Victory Kingpin |
2007–2008 |
| Victory Vegas |
2007–2008 |
Why Choose a Genuine Victory OEM Camshaft Set Stock Kingpin?
- Factory tolerances for compression and timing
- Leak-free sealing with the correct materials
- Restores power and smooth running
- Protects the rest of the engine from damage
- Made to the same specifications as the part installed at the factory, not an aftermarket copy
- Sold by Witchdoctors, a Victory OEM parts source with factory part numbers and diagrams for every listing
Victory stopped building motorcycles after the 2017 model year, and many parts are getting harder to find. Genuine OEM parts keep your bike correct, reliable and easier to sell. Read Victory OEM vs aftermarket parts to see the difference.
Features and Materials
Key Features
- Genuine Polaris/Victory OEM part #3021660
- Precision-machined to original specs
- Built for the heat and torque of the Victory V-twin
- Direct replacement for the listed models
Materials and Construction
Victory engine parts include hardened steel cams and valvetrain parts, cast aluminum cylinders and covers, and multi-layer steel or fiber gaskets with heat-resistant seals.
Common Reasons Riders Replace This Part
- Top-end and full engine rebuilds
- Fixing oil leaks at gaskets and seals
- Cam chain tensioner and valvetrain service
- Restoring a high-mileage or stored Victory
Signs Your Camshaft Set Stock Kingpin Needs Replacing
- Oil seeping from gaskets or seals
- Ticking or clattering from the top end
- Loss of power or compression
- Blue smoke or high oil use
Installation Tips
- Follow the Victory service manual for your engine.
- Clean all sealing surfaces completely before installing gaskets.
- Lubricate internal parts with clean engine oil on assembly.
- Torque fasteners in the factory sequence and steps.
- Refill fluids, prime the oil system and check for leaks on first start.
Not sure whether to do it yourself? Read when to seek professional help or DIY before you start.
Victory Parts Diagrams for This Part
Find part #3021660 in the factory Victory parts diagrams for your bike. Open the diagrams for your model and year to see exactly where it goes and which parts install with it:
Related Victory OEM Parts
Doing the job right? These genuine Victory parts fit the same bikes and are often replaced at the same time:
Recommended Accessories and Maintenance Supplies
Pair your Camshaft Set Stock Kingpin with these parts and supplies:
Helpful Guides from the Witchdoctors Blog
Frequently Asked Questions
What is the OEM part number for this Victory Camshaft Set Stock Kingpin?
The genuine Polaris/Victory part number is 3021660. Use it to match this part to your factory parts diagram.
Which Victory models does part #3021660 fit?
It fits the Jackpot (2006–2008); Hammer (2007–2008); Kingpin (2007–2008); Vegas (2007–2008).
Is this a genuine Victory part?
Yes. This is a genuine Polaris OEM part for Victory motorcycles, the same part number used at the factory, not an aftermarket copy.
Is this part new?
No. This is a used genuine OEM part (factory take-off). It is sold as described in the title and photos.
Can I still get parts for my Victory?
Yes. Polaris continues to supply many Victory parts, and Witchdoctors stocks thousands of genuine Victory part numbers. Read where to find Victory parts.
Is this part for the Freedom 92, 100 or 106 engine?
Fit depends on the model and year listed above. Check your VIN or contact us if you are unsure.
Should I replace gaskets when I open the engine?
Yes. Gaskets and seals should be replaced whenever a joint is opened.
Can I do this myself?
Covers and seals are reasonable DIY jobs. Internal engine work usually needs special tools and a manual.
Order Your Genuine Victory Camshaft Set Stock Kingpin Today
Ride with confidence on parts made for your bike. Order the genuine Victory Camshaft Set Stock Kingpin, OEM part #3021660, from Witchdoctors today and keep your Victory Jackpot, Hammer and other cruiser models running the way Victory designed it.
Where to Ride Your Victory
Your Victory was built for the open road. These scenic routes are favorites with motorcycle riders. Check current road conditions, seasonal closures and park fees before you go.
-
Natchez Trace Parkway — Mississippi, Alabama and Tennessee: 444 miles of low-traffic, history-filled parkway
-
Skyline Drive — Shenandoah National Park, Virginia: 105 miles along the Blue Ridge crest