Genuine Polaris Wheel Hub, Left — OEM Part #5134984
A clicking CV joint or torn boot will leave you stranded if you ignore it. The genuine Polaris Wheel Hub, Left restores factory strength and articulation on your Polaris ATV or side-by-side, with the original spline count, length and joint angles.
Axles, CV joints, bearings and hubs carry power to the wheels while the suspension cycles. They take constant shock loads, and wear shows up as clicking, vibration or play. This part is confirmed for 18 Polaris models from 2006 to 2014. See the full fitment list below.
Wheel Hub, Left at a Glance
-
OEM part number: 5134984
-
Brand: Polaris (genuine factory part)
-
Part type: Wheel Hub
-
Position: Left
-
Fits: RZR sport side-by-side and Sportsman ATV models, 2006–2014
-
Condition: New
Polaris Models and Years This Wheel Hub Fits
Genuine Polaris part #5134984 fits the models and years below. To be certain, match the part number to the factory parts diagram for your machine or contact us with your VIN before ordering.
Polaris RZR sport side-by-side Fitment
| Model |
Model Years |
| Polaris RZR |
2013 |
| Polaris RZR 4 |
2011–2013 |
| Polaris RZR 4 EPS |
2011–2012 |
| Polaris RZR 800 |
2009–2012, 2014 |
| Polaris RZR 800 4 |
2010, 2014 |
| Polaris RZR 800 EPS |
2010–2012 |
| Polaris RZR 800 S |
2009–2012 |
| Polaris RZR S |
2012–2013 |
| Polaris RZR S 800 |
2014 |
| Polaris RZR S 800 Intl |
2014 |
Polaris Sportsman ATV Fitment
| Model |
Model Years |
| Polaris Sportsman Touring 500 EFI |
2008–2009 |
| Polaris Sportsman Touring 500 HO |
2010–2013 |
| Polaris Sportsman Touring 800 EFI |
2008–2009 |
| Polaris Sportsman X2 |
2006 |
| Polaris Sportsman X2 500 EFI |
2007–2009 |
| Polaris Sportsman X2 700 EFI |
2008 |
| Polaris Sportsman X2 800 EFI |
2007, 2009 |
| Polaris Sportsman X2 800 EFI LE |
2008 |
Why Choose a Genuine Polaris OEM Wheel Hub?
- Exact spline count and length for a direct fit
- Factory joint angles for full suspension travel
- Designed for the torque of the listed engines
- Sealed boots and bearings to keep out water and grit
- Sold by Witchdoctors, with factory part numbers and parts diagrams for every Polaris model we support
Features and Materials
Key Features
- Genuine Polaris OEM axle or hub part, part #5134984
- Original spline, length and bearing dimensions
- Heat-treated shafts and joints where applicable
- Boots and seals designed for mud and water
- Fits the listed Polaris models without modification
Materials and Construction
Polaris axles use heat-treated alloy steel shafts and CV joints packed with high-temperature grease and sealed with durable boots. Hubs and bearings use hardened races and seals made for water crossings.
Common Reasons Riders Replace This Part
- Replacing an axle with a clicking or broken joint
- Fixing torn boots before dirt ruins the joint
- Replacing worn wheel bearings and hubs
- Repairs after a hard impact
Signs Your Wheel Hub Needs Replacing
- Clicking or popping when turning under power
- Torn boots with grease slung around the wheel
- Vibration at speed or under acceleration
- Play or grinding in the wheel bearing
- A broken axle or wheel that will not drive
Installation Tips
- Raise and support the machine safely and remove the wheel.
- Remove the axle nut; replace it if it is a one-time-use nut.
- Separate the suspension as needed, keeping the boot off sharp edges.
- Install the new part, making sure the splines seat and the circlip engages.
- Torque the axle nut and suspension hardware to spec and test-ride.
Not sure whether to tackle it yourself? Read when to seek professional help or DIY before you start.
Related OEM Parts for the Same Machines
Doing the job right? These genuine Polaris parts fit the same models and are often replaced at the same time:
Recommended Accessories and Maintenance Supplies
Pair your Wheel Hub with these parts and supplies:
Helpful Guides from the Witchdoctors Blog
Frequently Asked Questions
What is the OEM part number for this Polaris Wheel Hub?
The genuine Polaris part number is 5134984. Use it to match this part to your factory parts diagram.
Which Polaris models does part #5134984 fit?
It fits 18 Polaris RZR and Sportsman models from 2006 to 2014. The complete list is in the fitment tables above.
Is this a genuine Polaris part?
Yes. This is a genuine Polaris OEM part, the same part number used at the factory, not an aftermarket copy.
Do I need a new axle nut?
Many Polaris axle nuts are single-use. Check the parts diagram and replace the nut and cotter pin if specified.
Can I replace just the CV boot?
If the joint is quiet and the grease is clean, a boot kit can work. If dirt or water got in, replace the axle.
Is OEM as strong as a heavy-duty aftermarket axle?
It is built to the factory standard for stock machines. With much larger tires or a lift, consider heavy-duty axles.
Order Your Genuine Polaris Wheel Hub Today
Get your Polaris ATV or side-by-side back to factory condition. Add the genuine Polaris Wheel Hub, Left (part #5134984) to your cart today, and order the related parts above at the same time so you can finish the job in one go.
Where to Ride Your Polaris
Ready to put your machine to work? These off-road parks welcome both ATVs and UTVs. Check each park's current rules, vehicle-width limits and permit requirements before you go.