Genuine Yamaha Center Mirror — OEM Part #BAS-F6206-V0-00
Keep the cab on your Yamaha ATV or side-by-side tight, quiet and weather-resistant with a genuine Yamaha Center Mirror. It is made to the exact dimensions of the original part, so it mounts to the factory points and works with the surrounding cab structure, doors and glass.
Cab parts keep riders protected and the cockpit sealed against dust, water and wind. A worn or damaged piece causes rattles, leaks and safety problems. This part is confirmed for 40 Yamaha models from 2020 to 2026. See the full fitment list below.
Center Mirror at a Glance
-
OEM part number: BAS-F6206-V0-00
-
Brand: Yamaha (genuine factory part)
-
Part type: Rear View Mirror
-
Fits: Viking utility side-by-side, Wolverine recreation side-by-side and YXZ pure-sport side-by-side models, 2020–2026
-
Condition: New
Yamaha Models and Years This Center Mirror Fits
Genuine Yamaha part #BAS-F6206-V0-00 fits the models and years below. To be certain, match the part number to the factory parts diagram for your machine or contact us with your VIN before ordering.
Yamaha Viking utility side-by-side Fitment
| Model |
Model Years |
| Yamaha Viking EPS Ranch |
2022–2023, 2025–2026 |
| Yamaha Viking EPS Ranch Edition |
2022–2023 |
| Yamaha Viking VI EPS Ranch |
2022–2025 |
| Yamaha Viking VI EPS Ranch Edition |
2022–2024 |
Yamaha Wolverine recreation side-by-side Fitment
| Model |
Model Years |
| Yamaha Wolverine RMAX 2 EPS |
2022 |
| Yamaha Wolverine RMAX 4 EPS |
2022 |
| Yamaha Wolverine RMAX 4 LE |
2021 |
| Yamaha Wolverine RMAX 4 SE |
2021 |
| Yamaha Wolverine RMAX2 1000 Limited Edition |
2021–2023 |
| Yamaha Wolverine RMAX2 1000 R-Spec |
2021–2022 |
| Yamaha Wolverine RMAX2 1000 Sport |
2022–2023 |
| Yamaha Wolverine RMAX2 1000 XT-R |
2022–2023 |
| Yamaha Wolverine RMAX2 EPS |
2022 |
| Yamaha Wolverine RMAX2 LE |
2021, 2023 |
| Yamaha Wolverine RMAX2 SE |
2021 |
| Yamaha Wolverine RMAX2 Spor |
2023 |
| Yamaha Wolverine RMAX2 Sport |
2023 |
| Yamaha Wolverine RMAX2 XTR |
2023 |
| Yamaha Wolverine RMAX4 1000 Limited Edition |
2021–2023 |
| Yamaha Wolverine RMAX4 1000 R-Spec |
2021–2022 |
| Yamaha Wolverine RMAX4 1000 Sport |
2022 |
| Yamaha Wolverine RMAX4 1000 XT-R |
2022–2023 |
| Yamaha Wolverine RMAX4 EPS |
2022 |
| Yamaha Wolverine RMAX4 LE |
2021, 2023 |
| Yamaha Wolverine RMAX4 SE |
2021 |
| Yamaha Wolverine RMAX4 XT-R |
2023 |
| Yamaha Wolverine RMAX4 XTR |
2023 |
| Yamaha Wolverine X2 850 XT-R |
2022–2023 |
| Yamaha Wolverine X2 EPS XT-R |
2022 |
| Yamaha Wolverine X2 EPS XTR |
2022 |
| Yamaha Wolverine X2 XT-R |
2023 |
| Yamaha Wolverine X2 XTR |
2023 |
| Yamaha Wolverine X4 850 XT-R |
2022–2023 |
| Yamaha Wolverine X4 EPS XT |
2022 |
| Yamaha Wolverine X4 XT-R |
2023 |
| Yamaha Wolverine X4 XTR |
2023 |
Yamaha YXZ pure-sport side-by-side Fitment
| Model |
Model Years |
| Yamaha YXZ1000R SS SE |
2021 |
| Yamaha YXZ1000R SS SE Cal |
2021 |
| Yamaha YXZ1000R SS XT-R |
2020–2023 |
| Yamaha YXZ1000R SS XTR |
2020–2023 |
Why Choose a Genuine Yamaha OEM Center Mirror?
- Factory fit with the ROPS, doors and roof
- Helps keep dust, water and wind out of the cockpit
- Restores proper door, window and latch operation
- Keeps the structure Yamaha designed into the cab intact
- Sold by Witchdoctors, with factory part numbers and parts diagrams for every Yamaha model we support
Features and Materials
Key Features
- Genuine Yamaha OEM cab part, part #BAS-F6206-V0-00
- Original dimensions and mounting points
- Works with factory seals, hinges, latches and hardware
- Matches the original finish
- Built for off-road vibration and flex
Materials and Construction
Yamaha cab parts use materials matched to the job: coated steel for ROPS and structural parts, UV-stabilized plastics for trim and door panels, and weather-resistant rubber for seals and channels.
Common Reasons Riders Replace This Part
- Repairing a cab after a rollover or impact
- Fixing doors that rattle, sag or will not latch
- Sealing out dust and water on a cab-equipped machine
- Restoring a machine to factory condition
Signs Your Center Mirror Needs Replacing
- Doors or windows that rattle, sag or will not close
- Water or dust getting into the cab
- Bent, cracked or broken parts after an impact
- Torn, flattened or hardened seals
- Corrosion or broken welds on ROPS parts
Installation Tips
- Pull up the Yamaha parts diagram for the cab to see how the part fits.
- Support doors, glass or the roof before loosening hardware.
- Clean mounting surfaces and check nearby parts for damage.
- Install with bolts finger-tight, check alignment and door gaps, then tighten to spec.
- Test doors, latches and windows, and check for leaks with a light water spray.
Not sure whether to tackle it yourself? Read when to seek professional help or DIY before you start.
Yamaha Parts Diagrams for Your Machine
Find part #BAS-F6206-V0-00 and every part installed with it in the factory Yamaha parts diagrams for your model:
Related OEM Parts for the Same Machines
Doing the job right? These genuine Yamaha parts fit the same models and are often replaced at the same time:
Recommended Accessories and Maintenance Supplies
Pair your Center Mirror with these parts and supplies:
Helpful Guides from the Witchdoctors Blog
Frequently Asked Questions
What is the OEM part number for this Yamaha Center Mirror?
The genuine Yamaha part number is BAS-F6206-V0-00. Use it to match this part to your factory parts diagram.
Which Yamaha models does part #BAS-F6206-V0-00 fit?
It fits 40 Yamaha Viking, Wolverine and YXZ models from 2020 to 2026. The complete list is in the fitment tables above.
Is this a genuine Yamaha part?
Yes. This is a genuine Yamaha OEM part, the same part number used at the factory, not an aftermarket copy.
Will this fit a cab with aftermarket doors or windows?
It is designed for the factory Yamaha cab on the listed models. Aftermarket doors and glass may use different mounting points.
Do I need special tools?
Most cab parts install with hand tools. Large panels, doors and glass are much easier with a helper.
Can a bent ROPS part be straightened?
No. Bent or cracked structural parts should be replaced, not straightened. Have the cab inspected before riding again.
Order Your Genuine Yamaha Center Mirror Today
Ride with confidence on parts built for your machine. Order the genuine Yamaha Center Mirror, OEM part #BAS-F6206-V0-00, from Witchdoctors today and keep your Yamaha ATV or side-by-side running the way Yamaha designed it.
Where to Ride Your Yamaha
Ready to put your machine to work? These off-road parks welcome both ATVs and UTVs. Check each park's current rules, vehicle-width limits and permit requirements before you go.