Genuine Yamaha Complete Frame — OEM Part #B4M-F1110-10-00
Rattles, leaks and doors that will not latch take the fun out of every ride. The genuine Yamaha Complete Frame restores the factory fit of the cab on your Wolverine or Wolverine RMAX2, so doors close cleanly, seals stay tight and everything lines up the way it did when new.
Cab parts keep riders protected and the cockpit sealed against dust, water and wind. A worn or damaged piece causes rattles, leaks and safety problems. This part is confirmed for 16 Yamaha models from 2021 to 2024. See the full fitment list below.
Complete Frame at a Glance
-
OEM part number: B4M-F1110-10-00
-
Brand: Yamaha (genuine factory part)
-
Part type: Cab Frame
-
Fits: Wolverine recreation side-by-side models, 2021–2024
-
Condition: New
Yamaha Models and Years This Complete Frame Fits
Genuine Yamaha part #B4M-F1110-10-00 fits the models and years below. To be certain, match the part number to the factory parts diagram for your machine or contact us with your VIN before ordering.
Yamaha Wolverine recreation side-by-side Fitment
| Model |
Model Years |
| Yamaha Wolverine RMAX 2 Spo |
2024 |
| Yamaha Wolverine RMAX2 |
2021 |
| Yamaha Wolverine RMAX2 1000 Limited Edition |
2023 |
| Yamaha Wolverine RMAX2 1000 R-Spec |
2023 |
| Yamaha Wolverine RMAX2 1000 Sport |
2023 |
| Yamaha Wolverine RMAX2 1000 XT-R |
2023 |
| Yamaha Wolverine RMAX2 EPS |
2022 |
| Yamaha Wolverine RMAX2 LE |
2021, 2023–2024 |
| Yamaha Wolverine RMAX2 R SP |
2024 |
| Yamaha Wolverine RMAX2 R-Spec |
2023–2024 |
| Yamaha Wolverine RMAX2 Rspe |
2023 |
| Yamaha Wolverine RMAX2 SE |
2021 |
| Yamaha Wolverine RMAX2 Spor |
2023 |
| Yamaha Wolverine RMAX2 Sport |
2023–2024 |
| Yamaha Wolverine RMAX2 XT-R |
2023–2024 |
| Yamaha Wolverine RMAX2 XTR |
2023 |
Why Choose a Genuine Yamaha OEM Complete Frame?
- Factory fit with the ROPS, doors and roof
- Helps keep dust, water and wind out of the cockpit
- Restores proper door, window and latch operation
- Keeps the structure Yamaha designed into the cab intact
- Sold by Witchdoctors, with factory part numbers and parts diagrams for every Yamaha model we support
Features and Materials
Key Features
- Genuine Yamaha OEM cab part, part #B4M-F1110-10-00
- Original dimensions and mounting points
- Works with factory seals, hinges, latches and hardware
- Matches the original finish
- Built for off-road vibration and flex
Materials and Construction
Yamaha cab parts use materials matched to the job: coated steel for ROPS and structural parts, UV-stabilized plastics for trim and door panels, and weather-resistant rubber for seals and channels.
Common Reasons Riders Replace This Part
- Repairing a cab after a rollover or impact
- Fixing doors that rattle, sag or will not latch
- Sealing out dust and water on a cab-equipped machine
- Restoring a machine to factory condition
Signs Your Complete Frame Needs Replacing
- Doors or windows that rattle, sag or will not close
- Water or dust getting into the cab
- Bent, cracked or broken parts after an impact
- Torn, flattened or hardened seals
- Corrosion or broken welds on ROPS parts
Installation Tips
- Pull up the Yamaha parts diagram for the cab to see how the part fits.
- Support doors, glass or the roof before loosening hardware.
- Clean mounting surfaces and check nearby parts for damage.
- Install with bolts finger-tight, check alignment and door gaps, then tighten to spec.
- Test doors, latches and windows, and check for leaks with a light water spray.
Not sure whether to tackle it yourself? Read when to seek professional help or DIY before you start.
Yamaha Parts Diagrams for Your Machine
Find part #B4M-F1110-10-00 and every part installed with it in the factory Yamaha parts diagrams for your model:
Related OEM Parts for the Same Machines
Doing the job right? These genuine Yamaha parts fit the same models and are often replaced at the same time:
Recommended Accessories and Maintenance Supplies
Pair your Complete Frame with these parts and supplies:
Helpful Guides from the Witchdoctors Blog
Frequently Asked Questions
What is the OEM part number for this Yamaha Complete Frame?
The genuine Yamaha part number is B4M-F1110-10-00. Use it to match this part to your factory parts diagram.
Which Yamaha models does part #B4M-F1110-10-00 fit?
It fits 16 Yamaha Wolverine models from 2021 to 2024. The complete list is in the fitment tables above.
Is this a genuine Yamaha part?
Yes. This is a genuine Yamaha OEM part, the same part number used at the factory, not an aftermarket copy.
Will this fit a cab with aftermarket doors or windows?
It is designed for the factory Yamaha cab on the listed models. Aftermarket doors and glass may use different mounting points.
Do I need special tools?
Most cab parts install with hand tools. Large panels, doors and glass are much easier with a helper.
Can a bent ROPS part be straightened?
No. Bent or cracked structural parts should be replaced, not straightened. Have the cab inspected before riding again.
Order Your Genuine Yamaha Complete Frame Today
Get your Wolverine or Wolverine RMAX2 back to factory condition. Add the genuine Yamaha Complete Frame (part #B4M-F1110-10-00) to your cart today, and order the related parts above at the same time so you can finish the job in one go.
Where to Ride Your Yamaha
Ready to put your machine to work? These off-road parks welcome both ATVs and UTVs. Check each park's current rules, vehicle-width limits and permit requirements before you go.