Genuine Can-Am Cage Reinforcement, Right, Deep Black — OEM Part #705211747
Rattles, leaks and doors that will not latch take the fun out of every ride. The genuine Can-Am Cage Reinforcement, Right, Deep Black restores the factory fit of the cab on your Maverick Turbo or Maverick X3, so doors close cleanly, seals stay tight and everything lines up the way it did when new.
Cab parts keep riders protected and the cockpit sealed against dust, water and wind. A worn or damaged piece causes rattles, leaks and safety problems. This part is confirmed for 27 Can-Am models from 2018 to 2025. See the full fitment list below.
Cage Reinforcement, Right, Deep Black at a Glance
-
OEM part number: 705211747
-
Brand: Can-Am by BRP (genuine factory part)
-
Part type: Cab Frame
-
Position: Right
-
Color: Deep Black
-
Fits: Maverick sport side-by-side models, 2018–2025
-
Condition: New
Can-Am Models and Years This Cage Reinforcement Fits
Genuine Can-Am part #705211747 fits the models and years below. To be certain, match the part number to the factory parts diagram for your machine or contact us with your VIN before ordering.
Can-Am Maverick sport side-by-side Fitment
| Model |
Model Years |
| Can-Am Maverick MAX Turbo |
2019 |
| Can-Am Maverick MAX Turbo DS |
2021–2023 |
| Can-Am Maverick MAX Turbo DS 64" |
2024–2025 |
| Can-Am Maverick MAX Turbo R |
2019 |
| Can-Am Maverick MAX Turbo R DS (International) |
2021 |
| Can-Am Maverick MAX Turbo RR DS |
2022–2023 |
| Can-Am Maverick MAX Turbo RR DS 64" |
2024–2025 |
| Can-Am Maverick MAX Turbo RR RS |
2022–2023 |
| Can-Am Maverick MAX Turbo RR RS 72" |
2024–2025 |
| Can-Am Maverick MAX Turbo RR X ds |
2022–2023 |
| Can-Am Maverick MAX Turbo RR X ds 64" |
2024–2025 |
| Can-Am Maverick MAX Turbo RR X ds SAS 64" |
2025 |
| Can-Am Maverick MAX Turbo RR X mr |
2020–2023 |
| Can-Am Maverick MAX Turbo RR X mr 72" |
2024–2025 |
| Can-Am Maverick MAX Turbo RR X rc (International) |
2025 |
| Can-Am Maverick MAX Turbo RR X rc 72" |
2024–2025 |
| Can-Am Maverick MAX Turbo RR X rs |
2022–2023 |
| Can-Am Maverick MAX Turbo RR X rs 72" |
2024–2025 |
| Can-Am Maverick MAX Turbo RR X rs SAS (Europe) |
2025 |
| Can-Am Maverick MAX Turbo RR X rs SAS (International) |
2025 |
| Can-Am Maverick MAX Turbo RR X rs SAS 72" |
2025 |
| Can-Am Maverick MAX Turbo RR X rs Smart Shock |
2023 |
| Can-Am Maverick MAX Turbo RR X rs Smart Shock 72" SAS |
2024 |
| Can-Am Maverick MAX Turbo RS (International) |
2025 |
| Can-Am Maverick MAX Turbo RS 72" |
2024–2025 |
| Can-Am Maverick X3 MAX Turbo |
2018 |
| Can-Am Maverick X3 MAX Turbo R X rs DPS With Smart Lok |
2018 |
Why Choose a Genuine Can-Am OEM Cage Reinforcement?
- Factory fit with the cage, doors and roof
- Helps keep dust, water and wind out of the cockpit
- Restores proper door, window and latch operation
- Keeps the structure BRP designed into the cab intact
- Sold by Witchdoctors, with factory part numbers and parts diagrams for every Can-Am model we support
Features and Materials
Key Features
- Genuine Can-Am OEM cab part, part #705211747
- Original dimensions and mounting points
- Works with factory seals, hinges, latches and hardware
- Matches the original finish
- Built for off-road vibration and flex
Materials and Construction
Can-Am cab parts use materials matched to the job: coated steel for cage and structural parts, UV-stabilized plastics for trim and door panels, and weather-resistant rubber for seals and channels.
Common Reasons Riders Replace This Part
- Repairing a cab after a rollover or impact
- Fixing doors that rattle, sag or will not latch
- Sealing out dust and water on a cab-equipped machine
- Restoring a machine to factory condition
Signs Your Cage Reinforcement Needs Replacing
- Doors or windows that rattle, sag or will not close
- Water or dust getting into the cab
- Bent, cracked or broken parts after an impact
- Torn, flattened or hardened seals
- Corrosion or broken welds on cage parts
Installation Tips
- Pull up the Can-Am parts diagram for the cab to see how the part fits.
- Support doors, glass or the roof before loosening hardware.
- Clean mounting surfaces and check nearby parts for damage.
- Install with bolts finger-tight, check alignment and door gaps, then tighten to spec.
- Test doors, latches and windows, and check for leaks with a light water spray.
Not sure whether to tackle it yourself? Read when to seek professional help or DIY before you start.
Can-Am Parts Diagrams for Your Machine
Find part #705211747 and every part installed with it in the factory Can-Am parts diagrams for your model:
Related OEM Parts for the Same Machines
Doing the job right? These genuine Can-Am parts fit the same models and are often replaced at the same time:
Recommended Accessories and Maintenance Supplies
Pair your Cage Reinforcement with these parts and supplies:
Helpful Guides from the Witchdoctors Blog
Frequently Asked Questions
What is the OEM part number for this Can-Am Cage Reinforcement?
The genuine Can-Am part number is 705211747. Use it to match this part to your factory parts diagram.
Which Can-Am models does part #705211747 fit?
It fits 27 Can-Am Maverick models from 2018 to 2025. The complete list is in the fitment tables above.
Is this a genuine Can-Am part?
Yes. This is a genuine Can-Am OEM part from BRP, the same part number used at the factory, not an aftermarket copy.
Will this fit a cab with aftermarket doors or windows?
It is designed for the factory Can-Am cab on the listed models. Aftermarket doors and glass may use different mounting points.
Do I need special tools?
Most cab parts install with hand tools. Large panels, doors and glass are much easier with a helper.
Can a bent ROPS or cage part be straightened?
No. Bent or cracked structural parts should be replaced, not straightened. Have the cab inspected before riding again.
Order Your Genuine Can-Am Cage Reinforcement Today
Get your Maverick Turbo or Maverick X3 back to factory condition. Add the genuine Can-Am Cage Reinforcement, Right, Deep Black (part #705211747) to your cart today, and order the related parts above at the same time so you can finish the job in one go.
Where to Ride Your Can-Am
Ready to put your machine to work? These off-road parks welcome both ATVs and UTVs. Check each park's current rules, vehicle-width limits and permit requirements before you go.