Genuine Indian Drive Belt — OEM Part #3211168
Put the power down smoothly with a genuine Indian Drive Belt. Built for the Indian motorcycle, it matches the original splines, gear sizes and mounting, so it works with the rest of the driveline.
The clutch, primary, six-speed transmission, shifter, pulleys and drive belt carry every bit of engine torque to the rear wheel. This part is confirmed for 77 Indian models from 2014 to 2026.
Drive Belt at a Glance
-
OEM part number: 3211168
-
Brand: Indian (genuine Polaris-made OEM part)
-
Part type: Drive Belt
-
Indian fitment: Challenger, Chief, Chieftain, Elite, Pursuit, Roadmaster, Springfield and Vintage, 2014–2026
-
Condition: New
Models and Years This Drive Belt Fits
Genuine part #3211168 fits the models and years below. To be certain, match the part number to the factory parts diagram for your machine or contact us with your VIN before ordering.
Indian Motorcycle Fitment
77 Indian model variants share this part, grouped here by model family.
| Model Family |
Model Years |
Variants |
| Indian Challenger |
2023–2026 |
12 |
| Indian Chief |
2014–2021 |
8 |
| Indian Chieftain |
2014–2026 |
19 |
| Indian Elite |
2019 |
1 |
| Indian Pursuit |
2023–2026 |
12 |
| Indian Roadmaster |
2015–2026 |
15 |
| Indian Springfield |
2016–2026 |
8 |
| Indian Vintage |
2020–2021 |
2 |
Why Choose a Genuine Indian OEM Drive Belt?
- Exact gear, spline and bearing fit
- Restores smooth clutch engagement and shifting
- Correct belt alignment and tension
- Built for full Indian V-twin torque
- Sold by Witchdoctors, an Indian and Victory OEM parts specialist
Features and Materials
Key Features
- Genuine Indian OEM driveline part, part #3211168
- Machined to Indian's original specification
- Hardened surfaces where applicable
- Designed for the listed Indian models
- Works with factory belts, pulleys and clutch parts
Materials and Construction
Indian driveline parts use heat-treated steel gears, shafts and shift forks, friction and steel clutch plates, aluminum pulleys and covers, and carbon-fiber-reinforced drive belts.
Common Reasons Riders Replace This Part
- Fixing clutch slip or a heavy clutch pull
- Repairing missed shifts or false neutrals
- Replacing a worn or damaged belt or pulley
- Rebuilding the transmission
Signs Your Drive Belt Needs Replacing
- Clutch slipping under load
- Hard shifting or false neutrals
- Clunking or whining from the transmission
- Frayed, cracked or noisy drive belt
- Worn or damaged pulley teeth
Installation Tips
- Follow the Indian service manual for clutch, transmission and belt procedures.
- Replace gaskets and seals you disturb.
- Set belt tension and alignment with the correct gauge.
- Adjust clutch free play to spec.
- Test-ride gently and recheck belt tension after a few miles.
Not sure whether to tackle it yourself? Read when to seek professional help or DIY before you start.
Parts Diagrams for Your Bike
Find part #3211168 and every part installed with it in the factory parts diagrams for your model:
Related OEM Parts for the Same Bikes
Doing the job right? These genuine parts fit the same models and are often replaced at the same time:
Recommended Accessories and Maintenance Supplies
Pair your Drive Belt with these parts and supplies:
Helpful Guides from the Witchdoctors Blog
Frequently Asked Questions
What is the OEM part number for this Indian Drive Belt?
The genuine part number is 3211168. Use it to match this part to your factory parts diagram.
Which Indian motorcycles does part #3211168 fit?
It fits 77 Indian models (Challenger, Chief, Chieftain, Elite, Pursuit, Roadmaster, Springfield and Vintage) from 2014 to 2026. See the Indian fitment table above.
Is this a genuine OEM part?
Yes. This is a genuine Polaris-made OEM part, the same part number used at the factory for Indian models, not an aftermarket copy.
How do I check belt tension?
Use a belt tension gauge at the spec in your manual. Our blog covers belt checks step by step.
Should I replace both pulleys with a new belt?
Inspect the teeth. Worn or damaged pulleys will chew up a new belt.
What causes false neutrals?
Worn shift forks or detent parts, or a misadjusted shifter linkage.
Order Your Genuine Indian Drive Belt Today
Keep your Indian motorcycle on the road. Add the genuine Indian Drive Belt (part #3211168) to your cart today, and order the related parts above at the same time so you can finish the job in one go.
Where to Ride Your Indian
Put fresh parts to work on two of America's great motorcycle roads. Check road conditions, seasonal closures and park rules before you go.