Genuine Polaris Floor Support, Right, Black — OEM Part #1017208-329
Rattles, leaks and doors that will not latch take the fun out of every ride. The genuine Polaris Floor Support, Right, Black restores the factory fit of the cab on your Polaris ATV or side-by-side, so doors close cleanly, seals stay tight and everything lines up the way it did when new.
Cab parts keep riders protected and the cockpit sealed against dust, water and wind. A worn or damaged piece causes rattles, leaks and safety problems. This part is confirmed for 5 Polaris models from 2010 to 2014. See the full fitment list below.
Floor Support, Right, Black at a Glance
-
OEM part number: 1017208-329
-
Brand: Polaris (genuine factory part)
-
Part type: Cab Frame
-
Position: Right
-
Color: Black
-
Fits: low-speed vehicle and Ranger utility side-by-side models, 2010–2014
-
Condition: New
Polaris Models and Years This Floor Support Fits
Genuine Polaris part #1017208-329 fits the models and years below. To be certain, match the part number to the factory parts diagram for your machine or contact us with your VIN before ordering.
Polaris low-speed vehicle Fitment
| Model |
Model Years |
| Polaris LSV |
2011–2012 |
Polaris Ranger utility side-by-side Fitment
| Model |
Model Years |
| Polaris Ranger 48V EV Midsize (International) |
2013 |
| Polaris Ranger EV |
2010–2014 |
| Polaris Ranger EV Midsize (International) |
2014 |
| Polaris Ranger Lsv 4x4 |
2011–2012 |
Why Choose a Genuine Polaris OEM Floor Support?
- Factory fit with the cage, doors and roof
- Helps keep dust, water and wind out of the cockpit
- Restores proper door, window and latch operation
- Keeps the structure designed into the cab intact
- Sold by Witchdoctors, with factory part numbers and parts diagrams for every Polaris model we support
Features and Materials
Key Features
- Genuine Polaris OEM cab part, part #1017208-329
- Original dimensions and mounting points
- Works with factory seals, hinges, latches and hardware
- Matches the original finish
- Built for off-road vibration and flex
Materials and Construction
Polaris cab parts use materials matched to the job: coated steel for cage and structural parts, UV-stabilized plastics for trim and door panels, and weather-resistant rubber for seals and channels.
Common Reasons Riders Replace This Part
- Repairing a cab after a rollover or impact
- Fixing doors that rattle, sag or will not latch
- Sealing out dust and water on a cab-equipped machine
- Restoring a machine to factory condition
Signs Your Floor Support Needs Replacing
- Doors or windows that rattle, sag or will not close
- Water or dust getting into the cab
- Bent, cracked or broken parts after an impact
- Torn, flattened or hardened seals
- Corrosion or broken welds on cage parts
Installation Tips
- Pull up the Polaris parts diagram for the cab to see how the part fits.
- Support doors, glass or the roof before loosening hardware.
- Clean mounting surfaces and check nearby parts for damage.
- Install with bolts finger-tight, check alignment and door gaps, then tighten to spec.
- Test doors, latches and windows, and check for leaks with a light water spray.
Not sure whether to tackle it yourself? Read when to seek professional help or DIY before you start.
Related OEM Parts for the Same Machines
Doing the job right? These genuine Polaris parts fit the same models and are often replaced at the same time:
Recommended Accessories and Maintenance Supplies
Pair your Floor Support with these parts and supplies:
Helpful Guides from the Witchdoctors Blog
Frequently Asked Questions
What is the OEM part number for this Polaris Floor Support?
The genuine Polaris part number is 1017208-329. Use it to match this part to your factory parts diagram.
Which Polaris models does part #1017208-329 fit?
It fits the LSV (2011–2012); Ranger 48V EV Midsize (International) (2013); Ranger EV (2010–2014); Ranger EV Midsize (International) (2014); Ranger Lsv 4x4 (2011–2012).
Is this a genuine Polaris part?
Yes. This is a genuine Polaris OEM part, the same part number used at the factory, not an aftermarket copy.
Will this fit a cab with aftermarket doors or windows?
It is designed for the factory Polaris cab on the listed models. Aftermarket doors and glass may use different mounting points.
Do I need special tools?
Most cab parts install with hand tools. Large panels, doors and glass are much easier with a helper.
Can a bent ROPS or cage part be straightened?
No. Bent or cracked structural parts should be replaced, not straightened. Have the cab inspected before riding again.
Order Your Genuine Polaris Floor Support Today
Get your Polaris ATV or side-by-side back to factory condition. Add the genuine Polaris Floor Support, Right, Black (part #1017208-329) to your cart today, and order the related parts above at the same time so you can finish the job in one go.
Where to Ride Your Polaris
Ready to put your machine to work? These off-road parks welcome both ATVs and UTVs. Check each park's current rules, vehicle-width limits and permit requirements before you go.