Genuine Yamaha Frame Reinforcement — OEM Part #BG4-F1986-01-00
Rattles, leaks and doors that will not latch take the fun out of every ride. The genuine Yamaha Frame Reinforcement restores the factory fit of the cab on your Wolverine X2 or Wolverine X4, so doors close cleanly, seals stay tight and everything lines up the way it did when new.
Cab parts keep riders protected and the cockpit sealed against dust, water and wind. A worn or damaged piece causes rattles, leaks and safety problems. This part is confirmed for 31 Yamaha models from 2018 to 2026. See the full fitment list below.
Frame Reinforcement at a Glance
-
OEM part number: BG4-F1986-01-00
-
Brand: Yamaha (genuine factory part)
-
Part type: Cab Frame
-
Fits: Wolverine recreation side-by-side models, 2018–2026
-
Condition: New
Yamaha Models and Years This Frame Reinforcement Fits
Genuine Yamaha part #BG4-F1986-01-00 fits the models and years below. To be certain, match the part number to the factory parts diagram for your machine or contact us with your VIN before ordering.
Yamaha Wolverine recreation side-by-side Fitment
| Model |
Model Years |
| Yamaha Wolverine X2 |
2019–2020 |
| Yamaha Wolverine X2 850 |
2021–2022 |
| Yamaha Wolverine X2 850 R-Spec |
2019–2023 |
| Yamaha Wolverine X2 850 XT |
2026 |
| Yamaha Wolverine X2 850 XT-R |
2020, 2022–2023 |
| Yamaha Wolverine X2 EPS |
2020–2021 |
| Yamaha Wolverine X2 EPS Hun |
2021–2022 |
| Yamaha Wolverine X2 EPS Hunter |
2021–2022 |
| Yamaha Wolverine X2 EPS R S |
2022 |
| Yamaha Wolverine X2 EPS SE |
2021 |
| Yamaha Wolverine X2 EPS XT-R |
2022 |
| Yamaha Wolverine X2 EPS XTR |
2022 |
| Yamaha Wolverine X2 R |
2019–2020 |
| Yamaha Wolverine X2 R-Spec |
2019–2020, 2023–2024 |
| Yamaha Wolverine X2 XT-R |
2020, 2023–2025 |
| Yamaha Wolverine X2 XTR |
2020, 2023 |
| Yamaha Wolverine X4 |
2018–2020 |
| Yamaha Wolverine X4 850 |
2021 |
| Yamaha Wolverine X4 850 R-Spec |
2022–2023 |
| Yamaha Wolverine X4 850 XT |
2026 |
| Yamaha Wolverine X4 850 XT-R |
2020–2023 |
| Yamaha Wolverine X4 EPS |
2021 |
| Yamaha Wolverine X4 EPS R S |
2022 |
| Yamaha Wolverine X4 EPS SE |
2021 |
| Yamaha Wolverine X4 EPS XT |
2022 |
| Yamaha Wolverine X4 Hunter |
2018–2020 |
| Yamaha Wolverine X4 R-Spec |
2023–2024 |
| Yamaha Wolverine X4 SE |
2018–2019 |
| Yamaha Wolverine X4 Special |
2018–2019 |
| Yamaha Wolverine X4 XT-R |
2020, 2023–2025 |
| Yamaha Wolverine X4 XTR |
2020, 2023 |
Why Choose a Genuine Yamaha OEM Frame Reinforcement?
- Factory fit with the ROPS, doors and roof
- Helps keep dust, water and wind out of the cockpit
- Restores proper door, window and latch operation
- Keeps the structure Yamaha designed into the cab intact
- Sold by Witchdoctors, with factory part numbers and parts diagrams for every Yamaha model we support
Features and Materials
Key Features
- Genuine Yamaha OEM cab part, part #BG4-F1986-01-00
- Original dimensions and mounting points
- Works with factory seals, hinges, latches and hardware
- Matches the original finish
- Built for off-road vibration and flex
Materials and Construction
Yamaha cab parts use materials matched to the job: coated steel for ROPS and structural parts, UV-stabilized plastics for trim and door panels, and weather-resistant rubber for seals and channels.
Common Reasons Riders Replace This Part
- Repairing a cab after a rollover or impact
- Fixing doors that rattle, sag or will not latch
- Sealing out dust and water on a cab-equipped machine
- Restoring a machine to factory condition
Signs Your Frame Reinforcement Needs Replacing
- Doors or windows that rattle, sag or will not close
- Water or dust getting into the cab
- Bent, cracked or broken parts after an impact
- Torn, flattened or hardened seals
- Corrosion or broken welds on ROPS parts
Installation Tips
- Pull up the Yamaha parts diagram for the cab to see how the part fits.
- Support doors, glass or the roof before loosening hardware.
- Clean mounting surfaces and check nearby parts for damage.
- Install with bolts finger-tight, check alignment and door gaps, then tighten to spec.
- Test doors, latches and windows, and check for leaks with a light water spray.
Not sure whether to tackle it yourself? Read when to seek professional help or DIY before you start.
Yamaha Parts Diagrams for Your Machine
Find part #BG4-F1986-01-00 and every part installed with it in the factory Yamaha parts diagrams for your model:
Related OEM Parts for the Same Machines
Doing the job right? These genuine Yamaha parts fit the same models and are often replaced at the same time:
Recommended Accessories and Maintenance Supplies
Pair your Frame Reinforcement with these parts and supplies:
Helpful Guides from the Witchdoctors Blog
Frequently Asked Questions
What is the OEM part number for this Yamaha Frame Reinforcement?
The genuine Yamaha part number is BG4-F1986-01-00. Use it to match this part to your factory parts diagram.
Which Yamaha models does part #BG4-F1986-01-00 fit?
It fits 31 Yamaha Wolverine models from 2018 to 2026. The complete list is in the fitment tables above.
Is this a genuine Yamaha part?
Yes. This is a genuine Yamaha OEM part, the same part number used at the factory, not an aftermarket copy.
Will this fit a cab with aftermarket doors or windows?
It is designed for the factory Yamaha cab on the listed models. Aftermarket doors and glass may use different mounting points.
Do I need special tools?
Most cab parts install with hand tools. Large panels, doors and glass are much easier with a helper.
Can a bent ROPS part be straightened?
No. Bent or cracked structural parts should be replaced, not straightened. Have the cab inspected before riding again.
Order Your Genuine Yamaha Frame Reinforcement Today
Get your Wolverine X2 or Wolverine X4 back to factory condition. Add the genuine Yamaha Frame Reinforcement (part #BG4-F1986-01-00) to your cart today, and order the related parts above at the same time so you can finish the job in one go.
Where to Ride Your Yamaha
Ready to put your machine to work? These off-road parks welcome both ATVs and UTVs. Check each park's current rules, vehicle-width limits and permit requirements before you go.