Indian Front Drive Pulley, 29T 3239647

Genuine Indian Front Drive Pulley, 29T — OEM Part #3239647

Missed shifts, clutch slip and belt noise all trace back to the driveline. The genuine Indian Front Drive Pulley, 29T restores the factory clutch, transmission or final drive on your Indian motorcycle, built to Indian's original specification.

The clutch, primary, six-speed transmission, shifter, pulleys and drive belt carry every bit of engine torque to the rear wheel. This part is confirmed for 10 Indian models from 2025 to 2026.

Front Drive Pulley, 29T at a Glance

• OEM part number: 3239647
• Brand: Indian (genuine Polaris-made OEM part)
• Part type: Drive Pulley
• Indian fitment: 101 Scout, Scout, Sport and Super, 2025–2026
• Condition: New

Models and Years This Front Drive Pulley, 29T Fits

Genuine part #3239647 fits the models and years below. To be certain, match the part number to the factory parts diagram for your machine or contact us with your VIN before ordering.

Indian Motorcycle Fitment

Why Choose a Genuine Indian OEM Front Drive Pulley, 29T?

• Exact gear, spline and bearing fit
• Restores smooth clutch engagement and shifting
• Correct belt alignment and tension
• Built for full Indian V-twin torque
• Sold by Witchdoctors, an Indian and Victory OEM parts specialist

Features and Materials

Key Features

• Genuine Indian OEM driveline part, part #3239647
• Machined to Indian's original specification
• Hardened surfaces where applicable
• Designed for the listed Indian models
• Works with factory belts, pulleys and clutch parts

Materials and Construction

Indian driveline parts use heat-treated steel gears, shafts and shift forks, friction and steel clutch plates, aluminum pulleys and covers, and carbon-fiber-reinforced drive belts.

Common Reasons Riders Replace This Part

• Fixing clutch slip or a heavy clutch pull
• Repairing missed shifts or false neutrals
• Replacing a worn or damaged belt or pulley
• Rebuilding the transmission

Signs Your Front Drive Pulley, 29T Needs Replacing

• Clutch slipping under load
• Hard shifting or false neutrals
• Clunking or whining from the transmission
• Frayed, cracked or noisy drive belt
• Worn or damaged pulley teeth

Installation Tips

1. Follow the Indian service manual for clutch, transmission and belt procedures.
2. Replace gaskets and seals you disturb.
3. Set belt tension and alignment with the correct gauge.
4. Adjust clutch free play to spec.
5. Test-ride gently and recheck belt tension after a few miles.

Not sure whether to tackle it yourself? Read when to seek professional help or DIY before you start.

Parts Diagrams for Your Bike

Find part #3239647 and every part installed with it in the factory parts diagrams for your model:

• All Indian Motorcycle OEM parts diagrams

Related OEM Parts for the Same Bikes

Doing the job right? These genuine parts fit the same models and are often replaced at the same time:

• Indian Clutch Basket Assembly (#1327464)
• Indian Clutch Assembly (#1327553)
• Indian Primary Drive Gear (#1337350)
• Indian Clutch Lever Switch Kit (#2211457)

Recommended Accessories and Maintenance Supplies

Pair your Front Drive Pulley, 29T with these parts and supplies:

• Clutches and drive belts — Clutch kits and belts
• Drive belts — Indian and Victory drive belts
• Transmission and pulleys — Transmission parts and pulleys
• Shift link bushings — Tighten up shifting
• Indian Scout parts — more parts for your Scout

Helpful Guides from the Witchdoctors Blog

• Victory & Indian Motorcycle Drive Belt Maintenance Guide
• Spring Tune-Up for Your Victory or Indian Motorcycle: Get Ready to Ride
• Victory & Indian Motorcycle Spring Inspection Checklist

Frequently Asked Questions

What is the OEM part number for this Indian Front Drive Pulley, 29T?

The genuine part number is 3239647. Use it to match this part to your factory parts diagram.

Which Indian motorcycles does part #3239647 fit?

It fits 10 Indian models (101 Scout, Scout, Sport and Super) from 2025 to 2026. See the Indian fitment table above.

Is this a genuine OEM part?

Yes. This is a genuine Polaris-made OEM part, the same part number used at the factory for Indian models, not an aftermarket copy.

How do I check belt tension?

Use a belt tension gauge at the spec in your manual. Our blog covers belt checks step by step.

Should I replace both pulleys with a new belt?

Inspect the teeth. Worn or damaged pulleys will chew up a new belt.

What causes false neutrals?

Worn shift forks or detent parts, or a misadjusted shifter linkage.

Order Your Genuine Indian Front Drive Pulley, 29T Today

Keep your Indian motorcycle on the road. Add the genuine Indian Front Drive Pulley, 29T (part #3239647) to your cart today, and order the related parts above at the same time so you can finish the job in one go.

• How long will it take to receive my order?
• Shipping and return policy
• Questions about fitment? Contact us
• Shop all Indian OEM parts

Where to Ride Your Indian

Put fresh parts to work on two of America's great motorcycle roads. Check road conditions, seasonal closures and park rules before you go.

• Back of the Dragon (VA 16) — Marion to Tazewell, Virginia: 32 miles over three mountains
• Twisted Sisters (RR 335, 336, 337) — Texas Hill Country: a 100-mile loop of canyon curves