Front Gear Case Upper Bracket 9DQV-030010-3000 by CFMOTO

Genuine CFMoto Front Gear Case Upper Bracket — OEM Part #9DQV-030010-3000

Grinding gears, popping out of range and vibration all point to the drivetrain. The genuine CFMoto Front Gear Case Upper Bracket restores factory shifting and power delivery on your CForce 400 or CForce 500, built to the exact dimensions of the original so it meshes and mounts correctly.

The transmission, shift mechanism, differentials and drive shafts carry the full torque of the engine. Worn or mismatched parts lead to noise, hard shifting and expensive failures. This part is confirmed for 4 CFMoto models from 2022 to 2025. See the full fitment list below.

Front Gear Case Upper Bracket at a Glance

• OEM part number: 9DQV-030010-3000
• Brand: CFMOTO (genuine factory part)
• Part type: Gearcase Assembly
• Position: Front, Upper
• Fits: CForce ATV models, 2022–2025
• Condition: New

CFMoto Models and Years This Front Gear Case Upper Bracket Fits

Genuine CFMoto part #9DQV-030010-3000 fits the models and years below. To be certain, match the part number to the factory parts diagram for your machine or contact us with your VIN before ordering.

CFMoto CForce ATV Fitment

Why Choose a Genuine CFMoto OEM Front Gear Case Upper Bracket?

• Exact gear, spline and bearing fit
• Restores smooth, positive shifting and range selection
• Designed for full engine torque and load
• Lowers the risk of repeat failures from a poor-fitting part
• Sold by Witchdoctors, a CFMoto OEM parts source with factory part numbers and diagrams for every listing

Features and Materials

Key Features

• Genuine CFMoto OEM drivetrain part, part #9DQV-030010-3000
• Machined to original CFMoto specifications
• Hardened surfaces for wear resistance where applicable
• Matches factory seals, bearings and mounting
• Designed for the listed CFMoto models

Materials and Construction

CFMoto drivetrain parts use heat-treated alloy steel for gears, shafts, shift forks and splines, sealed bearings, and aluminum or cast housings. Seals and boots are made from oil- and weather-resistant elastomers.

Common Reasons Riders Replace This Part

• Fixing grinding, popping out of gear or hard shifting
• Rebuilding transmissions, gearcases and differentials
• Fixing 4WD engagement problems
• Repairing leaks and vibration from drive shafts and U-joints

Signs Your Front Gear Case Upper Bracket Needs Replacing

• Grinding, clunking or whining noises
• Popping out of gear or difficulty selecting range
• Vibration that increases with speed
• Oil leaks at seals, covers or the differential
• 4WD that will not engage or disengage

Installation Tips

1. Drain the transmission or differential fluid before disassembly.
2. Follow the CFMoto service manual. Many drivetrain jobs need exact shimming, preload and torque specs.
3. Replace seals, O-rings and gaskets you disturb.
4. Lubricate gears and bearings with the specified fluid during assembly.
5. Refill with the correct fluid type and amount, then test-ride and check for leaks.

Not sure whether to tackle it yourself? Read when to seek professional help or DIY before you start.

CFMoto Parts Diagrams for This Part

Part #9DQV-030010-3000 appears in these factory CFMoto parts diagrams. Open the diagram for your model to see exactly where it goes and which parts are installed with it:

• Frame diagram — 2025 CFMoto CForce 400
• Frame diagram — 2025 CFMoto CForce 500 S
• Frame diagram — 2024 CFMoto CForce 400 S
• Frame diagram — 2023 CFMoto CForce 500

Other OEM Parts in This Assembly

Doing the job right? These genuine CFMoto parts are installed alongside the Front Gear Case Upper Bracket and are often replaced at the same time:

• CFMoto Bolt M6x12 (#30006-060012870)
• CFMoto Nut M8 (#30204-080810)
• CFMoto Bolt M8x16 (#30006-080016810)
• CFMoto Seat Bracket (#9DQV-030120-3000)
• CFMoto Foot Pedal, Right (#9DQV-030400-3000)
• CFMoto Foot Pedal, Left (#9DQV-030300-3000)

Recommended Accessories and Maintenance Supplies

Pair your Front Gear Case Upper Bracket with these parts and supplies:

• Transmission parts and fluid — Transmission components and fluids
• Differential parts — Differential gears, bearings and seals
• Drive and propeller shafts — Prop shafts and U-joints
• Transmission oil — Gear oil for refilling after service
• CFMoto OEM parts diagrams — find every factory part for your model

Helpful Guides from the Witchdoctors Blog

• Signs, Causes & Fixes of UTV & ATV Transmission Failure
• Stuck ATV/UTV Gear Shifter? How to Fix It Fast
• Fix UTV & ATV Gearcase Grinding: Popping Out of Gear
• CFMoto OEM vs. Aftermarket Parts: Which Is Better?

Frequently Asked Questions

What is the OEM part number for this CFMoto Front Gear Case Upper Bracket?

The genuine CFMoto part number is 9DQV-030010-3000. Use it to match this part to your factory parts diagram.

Which CFMoto models does part #9DQV-030010-3000 fit?

It fits the CForce 400 (2022–2023, 2025); CForce 400 S (2024); CForce 500 (2022–2023); CForce 500 S (2024–2025).

Is this a genuine CFMoto part?

Yes. This is a genuine CFMOTO OEM part, the same part number used by CFMoto at the factory, not an aftermarket copy.

What fluid should I use after the repair?

Use the transmission and differential fluids listed in your CFMoto owner's manual. The wrong fluid can cause wear and engagement problems.

Should I replace bearings and seals during a rebuild?

Yes. Bearings and seals are inexpensive compared to labor. Replace them while the unit is apart.

Can a bad drivetrain part damage other components?

Yes. A worn part can send metal debris through the fluid and damage gears and bearings. Repair problems early.

Order Your Genuine CFMoto Front Gear Case Upper Bracket Today

Get your CForce 400 or CForce 500 back to factory condition. Add the genuine CFMoto Front Gear Case Upper Bracket (part #9DQV-030010-3000) to your cart today, and order the related parts above at the same time so you can finish the job in one go.

• How long will it take to receive my order?
• Shipping and return policy
• Questions about fitment? Contact us
• Shop all CFMoto OEM parts

Where to Ride Your CFMoto

Ready to put your machine to work? These off-road parks welcome both ATVs and UTVs. Check each park's current rules, vehicle-width limits and permit requirements before you go.

• Muddy Bottoms ATV & Recreation Park — Sarepta, Louisiana: about 150 miles of trails
• Byrd's Adventure Center — Ozark, Arkansas: about 30 miles of marked loop trails