Victory Front Muffler, Cruiser Black 1262242-266A

Genuine Victory Front Muffler, Cruiser Black — OEM Part #1262242-266A

A blown gasket, loose heat shield or rusted muffler changes how a Victory sounds and can burn your leg. The genuine Victory Front Muffler, Cruiser Black restores the factory exhaust on your Victory motorcycle, with the right fit, clearances and mounting.

Headpipes, mufflers, heat shields, clamps and gaskets route exhaust, control noise and protect the rider from heat. This part is confirmed for 5 Victory models from 2012 to 2017.

Front Muffler, Cruiser Black at a Glance

• OEM part number: 1262242-266A
• Brand: Victory (genuine Polaris-made OEM part)
• Part type: OEM Muffler
• Victory fitment: Gunner, Hammer, Highball, Judge and Vegas, 2012–2017
• Condition: New

Models and Years This Front Muffler, Cruiser Black Fits

Genuine part #1262242-266A fits the models and years below. To be certain, match the part number to the factory parts diagram for your machine or contact us with your VIN before ordering.

Victory Motorcycle Fitment

Why Choose a Genuine Victory OEM Front Muffler, Cruiser Black?

• Factory fit, clearance and sound
• Works with the original EFI calibration
• Protects legs and bodywork from heat
• Uses the original hangers and clamps
• Sold by Witchdoctors, a Victory and Indian parts specialist since the Victory years

Features and Materials

Key Features

• Genuine Victory OEM exhaust part, part #1262242-266A
• Original mounting points and pipe routing
• Chrome or black finish to match (where applicable)
• Designed for the listed Victory models
• Pairs with OEM gaskets and clamps

Materials and Construction

Victory exhaust parts use steel or stainless steel pipes and mufflers with chrome or ceramic-black finishes, stamped heat shields and multi-layer exhaust gaskets.

Common Reasons Riders Replace This Part

• Fixing ticking or puffing from an exhaust leak
• Replacing a dented, rusted or blued muffler
• Tightening rattling heat shields
• Returning to stock after aftermarket pipes

Signs Your Front Muffler, Cruiser Black Needs Replacing

• Ticking or puffing sound at the head
• Rattle from heat shields
• Rust, blueing or peeling chrome
• Soot around joints
• Hot spots near your leg

Installation Tips

1. Let the exhaust cool completely.
2. Spray hardware with penetrating oil before loosening.
3. Always use new exhaust gaskets at the heads.
4. Fit everything loosely, align, then tighten front to back.
5. Run the engine and check for leaks and rattles.

Not sure whether to tackle it yourself? Read when to seek professional help or DIY before you start.

Parts Diagrams for Your Bike

Find part #1262242-266A and every part installed with it in the factory parts diagrams for your model:

• 2017 Victory Gunner parts diagrams
• 2017 Victory Hammer parts diagrams
• 2017 Victory Highball parts diagrams
• 2017 Victory Vegas parts diagrams

Related OEM Parts for the Same Bikes

Doing the job right? These genuine parts fit the same models and are often replaced at the same time:

• Victory Exhaust Mount Stud (#5132040)
• Victory Heat Shield Clamp (#7080774)
• Victory Muffler Bracket To Muffler (#5250030-408)
• Victory Exhaust Flange Gasket For Cylinder Head (#5211770)
• Victory Exhaust Flange Gasket For Cylinder Head (#5246008)
• Victory Exhaust Muffler Clamp (#7081179)

Recommended Accessories and Maintenance Supplies

Pair your Front Muffler, Cruiser Black with these parts and supplies:

• Exhaust and slip-on mufflers — Mufflers and exhaust
• Gaskets — Exhaust gaskets
• Chrome cleaners and polishes — Keep pipes shining
• Fuel tuners — Tuners for exhaust changes
• Victory OEM parts diagrams — find every factory part for your bike

Helpful Guides from the Witchdoctors Blog

• Remove Burnt Rubber from Chrome Motorcycle Pipes
• Victory OEM Parts vs Aftermarket Parts: Which Is Right?
• Can You Still Get Victory Motorcycle Parts?

Frequently Asked Questions

What is the OEM part number for this Victory Front Muffler, Cruiser Black?

The genuine part number is 1262242-266A. Use it to match this part to your factory parts diagram.

Which Victory motorcycles does part #1262242-266A fit?

It fits the Victory Gunner (2015–2017); Victory Hammer (2012–2017); Victory Highball (2013–2017); Victory Judge (2013–2015); Victory Vegas (2012–2017).

Does part #1262242-266A fit Indian motorcycles?

Not according to the factory fitment data we have. If you ride an Indian, contact us with your VIN and we will find the right part.

Is this a genuine OEM part?

Yes. This is a genuine Polaris-made OEM part, the same part number used at the factory for Victory models, not an aftermarket copy.

Do I need new gaskets?

Yes. Exhaust gaskets crush on install and rarely reseal.

Will stock pipes need a tune?

Returning to factory pipes usually works with the factory map. If the bike was tuned for aftermarket pipes, reset the tune.

How do I clean burnt rubber off chrome?

Our blog has a step-by-step guide.

Order Your Genuine Victory Front Muffler, Cruiser Black Today

Keep your Victory motorcycle on the road. Add the genuine Victory Front Muffler, Cruiser Black (part #1262242-266A) to your cart today, and order the related parts above at the same time so you can finish the job in one go.

• How long will it take to receive my order?
• Shipping and return policy
• Questions about fitment? Contact us
• Shop all Victory OEM parts

Where to Ride Your Victory

Put fresh parts to work on two of America's great motorcycle roads. Check road conditions, seasonal closures and park rules before you go.

• Pig Trail Scenic Byway (AR 23) — Ozark Mountains, Arkansas: a tree-tunnel twisty through the Ozarks
• Peak to Peak Scenic Byway — Colorado Front Range: high-country views from Estes Park to Black Hawk