Genuine Yamaha Front Storage Seal — OEM Part #JN3-K815G-00-00
Keep your Pro Hauler 700 or Pro Hauler 1000 working with a genuine Yamaha Front Storage Seal. This OEM part is built to Yamaha's original specification, so it works with the factory bed, rack or hitch without guesswork.
Beds, racks, storage bins and hitch parts carry real weight over rough ground. Worn latches, cracked bins and bent brackets make loads unsafe and let water ruin what you carry. This part is confirmed for 3 Yamaha models from 2004 to 2006. See the full fitment list below.
Front Storage Seal at a Glance
-
OEM part number: JN3-K815G-00-00
-
Brand: Yamaha (genuine factory part)
-
Part type: Storage & Compartments
-
Position: Front
-
Fits: Pro Hauler utility side-by-side models, 2004–2006
-
Condition: New
Yamaha Models and Years This Front Storage Seal Fits
Genuine Yamaha part #JN3-K815G-00-00 fits the models and years below. To be certain, match the part number to the factory parts diagram for your machine or contact us with your VIN before ordering.
Yamaha Pro Hauler utility side-by-side Fitment
| Model |
Model Years |
| Yamaha Pro Hauler 700 |
2004–2006 |
| Yamaha Pro Hauler 700 2WD |
2006 |
| Yamaha Pro Hauler 1000 |
2004–2005 |
Why Choose a Genuine Yamaha OEM Front Storage Seal?
- Factory fit with the original bed, rack, box or frame
- Restores secure latching and load retention
- Keeps stored gear protected from water and dust
- Built for the rated cargo and towing use of the listed models
- Sold by Witchdoctors, with factory part numbers and parts diagrams for every Yamaha model we support
Features and Materials
Key Features
- Genuine Yamaha OEM part, part #JN3-K815G-00-00
- Original mounting points and hardware
- Made for the vibration and loads of work and trail use
- Corrosion-resistant finish or UV-stable plastic, depending on the part
- Works with factory latches, gas struts and dump-bed hardware
Materials and Construction
Yamaha cargo and storage parts use high-strength steel for load-bearing brackets, racks, beds and hitch parts, and impact-resistant, UV-stabilized plastics for boxes, bins and lids. Rubber seals help keep moisture out.
Common Reasons Riders Replace This Part
- Hauling tools, feed, firewood and equipment
- Towing within the rated limits for your model
- Keeping gear dry in factory storage
- Repairing a bed, tailgate or box after damage
Signs Your Front Storage Seal Needs Replacing
- Tailgates or lids that will not stay latched
- Cracked bins, boxes or bed panels
- Bent or broken rack and hitch brackets
- Torn or missing seals that let water in
- Dump-bed latches or struts that no longer hold
Installation Tips
- Empty the bed or compartment and support lids or beds before removing parts.
- Use the Yamaha parts diagram to identify fasteners and linkage.
- Remove the worn part and inspect nearby hinges, latches and brackets.
- Install with hardware finger-tight, check alignment, then torque to spec.
- Test latches, hinges and load security before carrying a full load.
Not sure whether to tackle it yourself? Read when to seek professional help or DIY before you start.
Related OEM Parts for the Same Machines
Doing the job right? These genuine Yamaha parts fit the same models and are often replaced at the same time:
Recommended Accessories and Maintenance Supplies
Pair your Front Storage Seal with these parts and supplies:
Helpful Guides from the Witchdoctors Blog
Frequently Asked Questions
What is the OEM part number for this Yamaha Front Storage Seal?
The genuine Yamaha part number is JN3-K815G-00-00. Use it to match this part to your factory parts diagram.
Which Yamaha models does part #JN3-K815G-00-00 fit?
It fits the Pro Hauler 700 (2004–2006); Pro Hauler 700 2WD (2006); Pro Hauler 1000 (2004–2005).
Is this a genuine Yamaha part?
Yes. This is a genuine Yamaha OEM part, the same part number used at the factory, not an aftermarket copy.
Does this change my cargo or towing capacity?
No. Capacities are set by Yamaha for your model. This part restores factory function only.
Will it fit aftermarket racks or accessories?
It is designed for the factory Yamaha setup on the listed models. Aftermarket accessories may need their own hardware.
Should I replace the latch hardware too?
If the latch, striker or hinge is worn, replace it at the same time so the new part closes and holds properly.
Order Your Genuine Yamaha Front Storage Seal Today
Ride with confidence on parts built for your machine. Order the genuine Yamaha Front Storage Seal, OEM part #JN3-K815G-00-00, from Witchdoctors today and keep your Pro Hauler 700 or Pro Hauler 1000 running the way Yamaha designed it.
Where to Ride Your Yamaha
Ready to put your machine to work? These off-road parks welcome both ATVs and UTVs. Check each park's current rules, vehicle-width limits and permit requirements before you go.