Indian Fork Guard, Black 5459332-266

Genuine Indian Fork Guard, Black — OEM Part #5459332-266

Restore planted, confident handling with the genuine Indian Fork Guard, Black, part #5459332-266. It is the factory front-end part for the Indian Chief 111 and Chief Dark Horse 116.

Forks and triple trees handle steering, braking loads and bumps. Worn seals, springs or bearings cause leaks, wobble and poor handling. This part is confirmed for 2 Indian models from 2023 to 2026. See the full fitment list below.

Indian Fork Guard, Black at a Glance

• OEM part number: 5459332-266
• Brand: Indian Motorcycle (genuine OEM part)
• Part type: Fork Guard
• Fits: Indian Chief Cruiser models, 2023–2026
• Condition: New

Indian Models and Years This Fork Guard, Black Fits

Genuine Indian part #5459332-266 fits the models and years below. To be certain, match the part number to the factory parts diagram for your bike, or contact us with your VIN before ordering.

Indian Chief Cruiser Fitment

Why Choose a Genuine Indian OEM Fork Guard, Black?

• Factory spring rate and damping
• Correct steering geometry and trail
• Leak-free seals and smooth action
• Stable handling under braking
• Made to the same specifications as the part installed at the factory, not an aftermarket copy
• Sold by Witchdoctors, an Indian Motorcycle OEM parts source with factory part numbers and diagrams for every listing

Every Indian, from the Chief and Chieftain to the Challenger, Scout and FTR, is engineered as a complete system. Genuine OEM parts keep your bike correct, reliable and easier to sell. Learn more in our Indian motorcycle parts guide.

Features and Materials

Key Features

• Genuine Indian Motorcycle OEM part #5459332-266
• Precision-machined to original dimensions
• Matching chrome or black finish
• Direct replacement for the listed models

Materials and Construction

Indian front suspension parts use hard-chromed steel fork tubes, cast aluminum sliders and triple clamps, steel springs, and oil-resistant seals and bushings.

Common Reasons Riders Replace This Part

• Fork seal and bushing service
• Replacing bent tubes or damaged legs
• Steering bearing replacement
• Repairs after a front-end impact

Signs Your Fork Guard, Black Needs Replacing

• Oil on the fork tubes or brake
• Clunking under braking
• Front end feels soft or bouncy
• Head shake or notchy steering

Installation Tips

1. Support the bike securely with the front wheel off the ground.
2. Remove the wheel, fender and calipers as needed.
3. Install new parts and fill forks with the correct oil and level.
4. Torque clamp and axle pinch bolts to spec.
5. Pump the forks, check alignment and test-ride carefully.

Not sure whether to do it yourself? Read when to seek professional help or DIY before you start.

Indian Parts Diagrams for This Part

Browse all Indian motorcycle parts diagrams to find part #5459332-266 for your model.

Recommended Accessories and Maintenance Supplies

Pair your Fork Guard, Black with these parts and supplies:

• Indian maintenance essentials — Filters, plugs, fluids and wear items
• Galfer brakes for Indian — Brake pads, rotors and braided lines
• Indian motorcycle tires — Front and rear cruiser and touring tires
• Indian wheel bearings and axles — Wheel bearings, seals and axle parts
• Indian OEM parts diagrams — find every factory part for your model

Helpful Guides from the Witchdoctors Blog

• Choosing The Correct Fork Oil For Your Victory or Indian Motorcycle
• Victory & Indian Motorcycle Maintenance Checklist
• Spring Tune-Up for Your Victory or Indian Motorcycle: Get Ready to Ride!
• Ultimate Guide & Checklist on "Preparing Your Motorcycle for Spring".

Matching a color? See our Indian factory paint codes.

Frequently Asked Questions

What is the OEM part number for this Indian Fork Guard, Black?

The genuine Indian Motorcycle part number is 5459332-266. Use it to match this part to your factory parts diagram.

Which Indian models does part #5459332-266 fit?

It fits the Indian Chief 111 (2023–2026); Indian Chief Dark Horse 116 (2023–2026).

Is this a genuine Indian Motorcycle part?

Yes. This is a genuine Indian Motorcycle OEM part, the same part number used at the factory, not an aftermarket copy.

How do I make sure this fits my bike?

Match part #5459332-266 to the parts diagram for your model and year, or send us your VIN and we will confirm it for you.

What fork oil does my Indian need?

See our fork oil guide and your service manual for the correct weight and level.

Should I replace seals on both forks?

Yes. Service both legs together for even damping.

Can bent fork tubes be straightened?

Replacement is the safer choice for a road motorcycle.

Order Your Genuine Indian Fork Guard, Black Today

Ride with confidence on parts made for your bike. Order the genuine Indian Fork Guard, Black, OEM part #5459332-266, from Witchdoctors today and keep your Indian Chief 111 and Chief Dark Horse 116 running the way Indian designed it.

• How long will it take to receive my order?
• Shipping and return policy
• Questions about fitment? Contact us
• Shop all Indian OEM parts

Where to Ride Your Indian

Your Indian was built for the open road. These scenic routes are favorites with motorcycle riders. Check current road conditions, seasonal closures and park fees before you go.

• Blue Ridge Parkway — North Carolina and Virginia: 469 miles of mountain curves with no commercial traffic
• Historic Route 66 — Illinois to California: America's most famous cross-country road trip