Genuine Polaris Rear Guide — OEM Part #5455264
Nothing matters more on a steep descent than brakes you can trust. The genuine Polaris Rear Guide restores factory braking on your RZR models, matching the original fittings, dimensions and hydraulic specification.
Lines, calipers, master cylinders, pads, rotors and parking brakes work as one hydraulic and mechanical system. A leak, worn part or wrong fitting leads to a soft pedal or brake failure. This part is confirmed for 11 Polaris models from 2019 to 2026. See the full fitment list below.
Rear Guide at a Glance
-
OEM part number: 5455264
-
Brand: Polaris (genuine factory part)
-
Part type: Brake Line Mount
-
Fits: RZR sport side-by-side models, 2019–2026
-
Condition: New
Polaris Models and Years This Rear Guide Fits
Genuine Polaris part #5455264 fits the models and years below. To be certain, match the part number to the factory parts diagram for your machine or contact us with your VIN before ordering.
Polaris RZR sport side-by-side Fitment
| Model |
Model Years |
| Polaris RZR Turbo S |
2020–2021 |
| Polaris RZR Turbo S 4 |
2020–2021 |
| Polaris RZR Turbo S 4 Velocity |
2020 |
| Polaris RZR Turbo S Velocity |
2020 |
| Polaris RZR Turbo S4 |
2021 |
| Polaris RZR XP 4 Turbo S |
2019–2020 |
| Polaris RZR XP 4 Turbo S Velocity |
2019–2020 |
| Polaris RZR XP S 1000 Ultimate |
2026 |
| Polaris RZR XP Turbo S |
2019–2020 |
| Polaris RZR XP Turbo S Velocity |
2019–2020 |
| Polaris RZR Xp4 Turbo S |
2019 |
Why Choose a Genuine Polaris OEM Rear Guide?
- Factory hydraulic specification for proper feel
- Direct fit with original calipers, lines and mounts
- Built for the heat and contamination of off-road braking
- Restores safe, predictable stopping
- Sold by Witchdoctors, with factory part numbers and parts diagrams for every Polaris model we support
Features and Materials
Key Features
- Genuine Polaris OEM brake part, part #5455264
- Original fittings, banjo bolts and mounting points
- Built to Polaris's brake system specification
- Designed for mud, water and steep terrain
- Works with the DOT fluid specified in your manual
Materials and Construction
Polaris brake parts use reinforced brake hose, steel lines and fittings, aluminum caliper and master-cylinder bodies with DOT-compatible seals, and steel rotors and friction pads designed for off-road use.
Common Reasons Riders Replace This Part
- Fixing a soft, spongy or sinking pedal
- Replacing leaking lines, calipers or master cylinders
- Replacing worn pads and rotors
- Restoring a parking brake that will not hold
Signs Your Rear Guide Needs Replacing
- Spongy pedal or lever, or one that sinks
- Brake fluid leaks
- Grinding, squealing or pulling to one side
- Scored, warped or thin rotors
- A parking brake that will not hold on a slope
Installation Tips
- Use the Polaris parts diagram to confirm fittings, crush washers and routing.
- Protect painted surfaces from fluid and cap open lines.
- Install with new crush washers on banjo fittings and torque to spec.
- Refill with fresh DOT fluid of the specified type and bleed fully.
- Test brake feel and function at low speed before riding normally.
Not sure whether to tackle it yourself? Read when to seek professional help or DIY before you start.
Polaris Parts Diagrams for Your Machine
Find part #5455264 and every part installed with it in the factory Polaris parts diagrams for your model:
Related OEM Parts for the Same Machines
Doing the job right? These genuine Polaris parts fit the same models and are often replaced at the same time:
Recommended Accessories and Maintenance Supplies
Pair your Rear Guide with these parts and supplies:
Helpful Guides from the Witchdoctors Blog
Frequently Asked Questions
What is the OEM part number for this Polaris Rear Guide?
The genuine Polaris part number is 5455264. Use it to match this part to your factory parts diagram.
Which Polaris models does part #5455264 fit?
It fits 11 Polaris RZR models from 2019 to 2026. The complete list is in the fitment tables above.
Is this a genuine Polaris part?
Yes. This is a genuine Polaris OEM part, the same part number used at the factory, not an aftermarket copy.
What brake fluid should I use?
Use the DOT type in your Polaris owner's manual or on the reservoir cap. Never mix DOT 5 silicone with DOT 3, 4 or 5.1.
Do I need to bleed the brakes?
Yes, any time the hydraulic system is opened.
Should I replace rotors with pads?
Not always. Measure thickness and check for scoring or warping against the minimum spec.
Order Your Genuine Polaris Rear Guide Today
Get your RZR models back to factory condition. Add the genuine Polaris Rear Guide (part #5455264) to your cart today, and order the related parts above at the same time so you can finish the job in one go.
Where to Ride Your Polaris
Ready to put your machine to work? These off-road parks welcome both ATVs and UTVs. Check each park's current rules, vehicle-width limits and permit requirements before you go.