Victory Indicator Light Harness 2410493

Genuine Victory Indicator Light Harness — OEM Part #2410493

Fix electrical gremlins the right way with the genuine Victory Victory Indicator Light Harness, Polaris part #2410493. It is the factory electrical part for the Victory Hammer, Kingpin and other cruiser models.

The electrical system powers ignition, fuel injection, lighting and accessories. Bad connections or failed modules cause no-starts and strange faults. This part is confirmed for 4 Victory models from 2005 to 2010. See the full fitment list below.

Victory Indicator Light Harness at a Glance

• OEM part number: 2410493
• Brand: Victory Motorcycles (genuine Polaris OEM part)
• Part type: OEM Harness
• Fits: Victory Cruiser models, 2005–2010
• Condition: New

Victory Models and Years This Indicator Light Harness Fits

Genuine Victory part #2410493 fits the models and years below. To be certain, match the part number to the factory parts diagram for your bike, or decode your VIN with our Victory VIN decoder before ordering.

Victory Cruiser Fitment

Why Choose a Genuine Victory OEM Indicator Light Harness?

• Plug-and-play connectors for the factory harness
• Correct circuits and resistance values
• Reliable starts and charging
• Avoids the problems of universal wiring
• Made to the same specifications as the part installed at the factory, not an aftermarket copy
• Sold by Witchdoctors, a Victory OEM parts source with factory part numbers and diagrams for every listing

Victory stopped building motorcycles after the 2017 model year, and many parts are getting harder to find. Genuine OEM parts keep your bike correct, reliable and easier to sell. Read Victory OEM vs aftermarket parts to see the difference.

Features and Materials

Key Features

• Genuine Polaris/Victory OEM part #2410493
• Factory connectors and routing
• Weather-sealed terminals
• Direct replacement for the listed models

Materials and Construction

Victory electrical parts use automotive-grade copper wire, sealed connectors, heat-resistant insulation and molded switch housings.

Common Reasons Riders Replace This Part

• Fixing no-start or intermittent electrical faults
• Replacing chafed or melted wiring
• Replacing failed switches, sensors or modules
• Repairs after a tip-over or water damage

Signs Your Indicator Light Harness Needs Replacing

• No start or intermittent power
• Blown fuses or dead circuits
• Warning lights on the dash
• Melted or corroded connectors

Installation Tips

1. Disconnect the battery negative cable first.
2. Photograph the routing of the old part before removing it.
3. Install the new part, matching the original routing and clips.
4. Apply dielectric grease to connectors to keep out moisture.
5. Reconnect the battery and test the circuit before riding.

Not sure whether to do it yourself? Read when to seek professional help or DIY before you start.

Victory Parts Diagrams for This Part

Find part #2410493 in the factory Victory parts diagrams for your bike. Open the diagrams for your model and year to see exactly where it goes and which parts install with it:

• 2010 Victory Hammer parts diagrams
• 2010 Victory Jackpot parts diagrams
• 2010 Victory Kingpin parts diagrams
• 2010 Victory Vegas parts diagrams
• 2009 Victory Hammer parts diagrams
• 2009 Victory Jackpot parts diagrams
• 2009 Victory Kingpin parts diagrams
• 2009 Victory Vegas parts diagrams

Related Victory OEM Parts

Doing the job right? These genuine Victory parts fit the same bikes and are often replaced at the same time:

• Victory Heated Grips Harness (#2411032)
• Victory Jumper Harness, Fuel Injector (#2461135)
• Victory Charging Harness (#2461006)
• Victory Rear Wire Harness (#2461171)
• Victory Headlight Harness (#2410734)
• Victory Rear Electrical Harness (#2410955)

Recommended Accessories and Maintenance Supplies

Pair your Indicator Light Harness with these parts and supplies:

• BS Battery for Victory — Sealed AGM and lithium batteries
• Victory stators and regulators — Stators, rectifiers, regulators and sensors
• Custom Dynamics LED lighting — LED turn signals, brake lights and accent lighting
• Victory maintenance essentials — Filters, plugs, fluids and wear items
• Victory OEM parts diagrams — find every factory part for your model

Helpful Guides from the Witchdoctors Blog

• Victory Motorcycle Wheel Speed Sensor: Signs & Replacement
• Victory & Indian Motorcycle Maintenance Checklist
• Can You Still Get Parts for Victory Motorcycles?
• Spring Tune-Up for Your Victory or Indian Motorcycle: Get Ready to Ride!

Frequently Asked Questions

What is the OEM part number for this Victory Indicator Light Harness?

The genuine Polaris/Victory part number is 2410493. Use it to match this part to your factory parts diagram.

Which Victory models does part #2410493 fit?

It fits the Hammer (2005–2010); Kingpin (2005–2010); Jackpot (2006–2010); Vegas (2006–2010).

Is this a genuine Victory part?

Yes. This is a genuine Polaris OEM part for Victory motorcycles, the same part number used at the factory, not an aftermarket copy.

Can I still get parts for my Victory?

Yes. Polaris continues to supply many Victory parts, and Witchdoctors stocks thousands of genuine Victory part numbers. Read where to find Victory parts.

Do I need to program a new module?

Some control modules and keys need setup with a dealer tool. Check the service manual for your model.

How do I find an electrical fault?

Check the battery, fuses and grounds first, then use the wiring diagram in the service manual.

Does this include connectors?

OEM harness parts include the factory connectors shown in the parts diagram.

Order Your Genuine Victory Indicator Light Harness Today

Ride with confidence on parts made for your bike. Order the genuine Victory Indicator Light Harness, OEM part #2410493, from Witchdoctors today and keep your Victory Hammer, Kingpin and other cruiser models running the way Victory designed it.

• How long will it take to receive my order?
• Shipping and return policy
• Questions about fitment? Contact us
• Shop all Victory OEM parts
• Victory motorcycle parts guide

Where to Ride Your Victory

Your Victory was built for the open road. These scenic routes are favorites with motorcycle riders. Check current road conditions, seasonal closures and park fees before you go.

• Cherohala Skyway — Tennessee and North Carolina: 43 miles of high, sweeping mountain curves
• Kancamagus Scenic Byway — White Mountains, New Hampshire: 34.5 miles through the White Mountain National Forest