Indian Head Gasket, Front Cylinder 5814184

Genuine Indian Head Gasket, Front Cylinder — OEM Part #5814184

Rebuild with confidence. The genuine Indian Head Gasket, Front Cylinder is the factory engine part for your Indian Scout, machined to Indian's original specification for correct clearances, sealing and long life.

Engine internals, gaskets and covers work under heat, pressure and vibration. A part that is slightly off can cause oil leaks, noise or serious engine damage. This part is confirmed for 4 Indian models from 2016 to 2024.

Head Gasket, Front Cylinder at a Glance

• OEM part number: 5814184
• Brand: Indian (genuine Polaris-made OEM part)
• Part type: Engine Gaskets & Seals
• Indian fitment: Scout, 2016–2024
• Condition: New

Models and Years This Head Gasket, Front Cylinder Fits

Genuine part #5814184 fits the models and years below. To be certain, match the part number to the factory parts diagram for your machine or contact us with your VIN before ordering.

Indian Motorcycle Fitment

Why Choose a Genuine Indian OEM Head Gasket, Front Cylinder?

• Factory tolerances for correct clearances
• Designed to work with the other OEM parts in the Indian engine
• Correct sealing surfaces and gasket thickness
• Lowers the risk of a repeat teardown
• Sold by Witchdoctors, an Indian and Victory OEM parts specialist

Features and Materials

Key Features

• Genuine Indian OEM engine part, part #5814184
• Machined to Indian's original specification
• Matches factory sealing surfaces and mounting points
• Made for the heat and loads of the Indian V-twin
• Pairs with gaskets and seals on the same parts diagram

Materials and Construction

Indian engine parts use aluminum alloy castings for cases, cylinders and covers, heat-treated steel for cams, shafts and valvetrain parts, and multi-layer or composite gaskets with elastomer oil seals.

Common Reasons Riders Replace This Part

• Top-end or full engine rebuilds
• Fixing oil leaks at covers, cases and seals
• Repairing cam chain tensioner or valvetrain wear
• Restoring compression and power on a high-mileage engine

Signs Your Head Gasket, Front Cylinder Needs Replacing

• Oil leaks at covers, base gaskets or seals
• Ticking, knocking or cam chain noise
• Low compression or power loss
• Blue smoke or high oil use
• Metal debris on the drain plug magnet

Installation Tips

1. Follow the Indian service manual; engine work needs exact procedures and torque specs.
2. Clean all mating surfaces and replace every gasket and seal you disturb.
3. Measure critical clearances before final assembly.
4. Lubricate parts with clean engine oil or assembly lube.
5. Torque in sequence, refill oil and check for leaks.

Not sure whether to tackle it yourself? Read when to seek professional help or DIY before you start.

Parts Diagrams for Your Bike

Find part #5814184 and every part installed with it in the factory parts diagrams for your model:

• 2022 Indian Scout Bobber Sixty parts diagrams
• 2022 Indian Scout Bobber Twenty parts diagrams
• 2022 Indian Scout Rogue Sixty parts diagrams
• 2022 Indian Scout Sixty parts diagrams
• All Indian Motorcycle OEM parts diagrams

Related OEM Parts for the Same Bikes

Doing the job right? These genuine parts fit the same models and are often replaced at the same time:

• Indian Rear Engine Cylinder 93Mm Black (#3022768-657)
• Indian Piston (#3022762)
• Indian Head Gasket, Rear Cylinder (#5814185)
• Indian Front Engine Cylinder 93Mm Black (#3022767-657)

Recommended Accessories and Maintenance Supplies

Pair your Head Gasket, Front Cylinder with these parts and supplies:

• Engine replacement parts — Engine parts for Indian and Victory
• Gaskets — Gaskets and seals
• Motorcycle oil and fluids — Oil for rebuild and break-in
• Camshafts and fuel tuners — Performance upgrades
• Indian Scout parts — more parts for your Scout

Helpful Guides from the Witchdoctors Blog

• Spring Tune-Up for Your Victory or Indian Motorcycle: Get Ready to Ride
• Victory & Indian Motorcycle Spring Inspection Checklist

Frequently Asked Questions

What is the OEM part number for this Indian Head Gasket, Front Cylinder?

The genuine part number is 5814184. Use it to match this part to your factory parts diagram.

Which Indian motorcycles does part #5814184 fit?

It fits the Indian Scout Bobber Sixty (2020–2024); Indian Scout Bobber Twenty (2022); Indian Scout Rogue Sixty (2022–2024); Indian Scout Sixty (2016–2024).

Is this a genuine OEM part?

Yes. This is a genuine Polaris-made OEM part, the same part number used at the factory for Indian models, not an aftermarket copy.

Should I replace gaskets at the same time?

Yes. Replace any gasket or seal you disturb; they are on the same parts diagram.

Are Indian engine parts still available?

Yes. Indian is still in production, and Witchdoctors stocks genuine engine parts for current and older models. Order wear items like gaskets and seals with the main part.

Can I do this myself?

Experienced home mechanics can with the service manual and the right tools. Internal work needing precise measurement is best done by a qualified technician.

Order Your Genuine Indian Head Gasket, Front Cylinder Today

Keep your Indian motorcycle on the road. Add the genuine Indian Head Gasket, Front Cylinder (part #5814184) to your cart today, and order the related parts above at the same time so you can finish the job in one go.

• How long will it take to receive my order?
• Shipping and return policy
• Questions about fitment? Contact us
• Shop all Indian OEM parts

Where to Ride Your Indian

Put fresh parts to work on two of America's great motorcycle roads. Check road conditions, seasonal closures and park rules before you go.

• Going-to-the-Sun Road — Glacier National Park, Montana: about 50 miles across the Continental Divide
• Spearfish Canyon Scenic Byway — near Sturgis, South Dakota: a limestone canyon ride a short hop from Sturgis