Genuine Kawasaki Hole Plug Cap — OEM Part #11065-1350
Protect your investment with a genuine Kawasaki Hole Plug Cap. Built for the Teryx KRX or Teryx KRX4, this OEM part takes the abuse so your frame, suspension and drivetrain do not have to, and it mounts without drilling.
Bumpers, skid plates and guards are the first line of defense. They spread out impacts that would otherwise bend frame rails, crack cases or damage suspension parts. This part is confirmed for 4 Kawasaki models from 2021 to 2027. See the full fitment list below.
Hole Plug Cap at a Glance
-
OEM part number: 11065-1350
-
Brand: Kawasaki (genuine factory part)
-
Part type: Front Bumper
-
Fits: Teryx recreation side-by-side models, 2021–2027
-
Condition: New
Kawasaki Models and Years This Hole Plug Cap Fits
Genuine Kawasaki part #11065-1350 fits the models and years below. To be certain, match the part number to the factory parts diagram for your machine or contact us with your VIN before ordering.
Kawasaki Teryx recreation side-by-side Fitment
| Model |
Model Years |
| Kawasaki Teryx KRX 1000 |
2021–2022 |
| Kawasaki Teryx KRX 1000 Blackout Edition |
2025–2027 |
| Kawasaki Teryx KRX 1000 Trail Edition |
2021–2025 |
| Kawasaki Teryx KRX4 1000 Blackout Edition |
2025–2027 |
Why Choose a Genuine Kawasaki OEM Hole Plug Cap?
- Bolts to factory mounting points, with no drilling
- Shields expensive parts from rocks, stumps and debris
- Works with the factory frame and ground clearance
- Costs far less than repairing the parts it protects
- Sold by Witchdoctors, with factory part numbers and parts diagrams for every Kawasaki model we support
Features and Materials
Key Features
- Genuine Kawasaki OEM protection part, part #11065-1350
- Designed around the original frame and suspension geometry
- Corrosion-resistant finish for wet and muddy conditions
- Uses factory hardware locations
- Built for repeated trail and work-site impacts
Materials and Construction
Kawasaki protection parts are typically steel tube, stamped steel, aluminum or high-density plastic, depending on location, finished to resist corrosion from mud, water and road salt.
Common Reasons Owners Replace This Part
- Trail riding over rocks, logs and ruts
- Farm, ranch and job-site work around brush, posts and stumps
- Replacing a bent bumper or cracked skid plate
- Restoring factory protection on a used machine
Signs Your Hole Plug Cap Needs Replacing
- Bent, cracked or torn bumpers, plates or guards
- Missing or loose mounting hardware
- Deep gouges that weaken the part
- Rust-through on steel parts
- Damage to the components behind the guard
Installation Tips
- Support the machine safely on stands if working underneath.
- Use the Kawasaki parts diagram to identify every bolt and bracket.
- Remove the damaged part and check the frame mounts for cracks or bends.
- Install with fresh hardware where needed and thread locker if the manual calls for it.
- Torque to spec and recheck after your first ride.
Not sure whether to tackle it yourself? Read when to seek professional help or DIY before you start.
Kawasaki Parts Diagrams for Your Machine
Find part #11065-1350 and every part installed with it in the factory Kawasaki parts diagrams for your model:
Related OEM Parts for the Same Machines
Doing the job right? These genuine Kawasaki parts fit the same models and are often replaced at the same time:
Recommended Accessories and Maintenance Supplies
Pair your Hole Plug Cap with these parts and supplies:
Helpful Guides from the Witchdoctors Blog
Frequently Asked Questions
What is the OEM part number for this Kawasaki Hole Plug Cap?
The genuine Kawasaki part number is 11065-1350. Use it to match this part to your factory parts diagram.
Which Kawasaki models does part #11065-1350 fit?
It fits the Teryx KRX 1000 (2021–2022); Teryx KRX 1000 Blackout Edition (2025–2027); Teryx KRX 1000 Trail Edition (2021–2025); Teryx KRX4 1000 Blackout Edition (2025–2027).
Is this a genuine Kawasaki part?
Yes. This is a genuine Kawasaki OEM part, the same part number used at the factory, not an aftermarket copy.
Is this as strong as aftermarket armor?
It is built to Kawasaki's factory standard for the listed models. Aftermarket armor may be heavier, but the OEM part fits the factory mounts exactly and keeps the original weight and clearance.
Can I mount a winch with this part?
Only if the Kawasaki parts diagram shows a winch mount for your model. Otherwise use the dedicated winch mount.
Should I replace the hardware too?
Hardware that has taken a hard hit can stretch or bend. Replace damaged bolts and use fresh thread locker.
Order Your Genuine Kawasaki Hole Plug Cap Today
Work and ride with confidence on parts built for your machine. Order the genuine Kawasaki Hole Plug Cap, OEM part #11065-1350, from Witchdoctors today and keep your Teryx KRX or Teryx KRX4 running the way Kawasaki designed it.
Where to Ride Your Kawasaki
Ready to put your machine to work? These off-road parks welcome both ATVs and UTVs. Check each park's current rules, vehicle-width limits and permit requirements before you go.