Genuine Kawasaki Shock Absorber Damper — OEM Part #59201-0004
Protect your investment with a genuine Kawasaki Shock Absorber Damper. Built for the Teryx KRX or Teryx KRX4, this OEM part takes the abuse so your frame, suspension and drivetrain do not have to, and it mounts without drilling.
Bumpers, skid plates and guards are the first line of defense. They spread out impacts that would otherwise bend frame rails, crack cases or damage suspension parts. This part is confirmed for 14 Kawasaki models from 2020 to 2027. See the full fitment list below.
Shock Absorber Damper at a Glance
-
OEM part number: 59201-0004
-
Brand: Kawasaki (genuine factory part)
-
Part type: Shock Bumper
-
Fits: Teryx recreation side-by-side models, 2020–2027
-
Condition: New
Kawasaki Models and Years This Shock Absorber Damper Fits
Genuine Kawasaki part #59201-0004 fits the models and years below. To be certain, match the part number to the factory parts diagram for your machine or contact us with your VIN before ordering.
Kawasaki Teryx recreation side-by-side Fitment
| Model |
Model Years |
| Kawasaki Teryx KRX 1000 |
2020–2024 |
| Kawasaki Teryx KRX 1000 Blackout Edition |
2025–2027 |
| Kawasaki Teryx KRX 1000 ES |
2021, 2023–2025 |
| Kawasaki Teryx KRX 1000 Lifted Edition |
2025 |
| Kawasaki Teryx KRX 1000 Rock Edition |
2026 |
| Kawasaki Teryx KRX 1000 SE |
2024 |
| Kawasaki Teryx KRX 1000 Special Edition |
2021–2024 |
| Kawasaki Teryx KRX 1000 Trail Edition |
2021–2025 |
| Kawasaki Teryx KRX4 1000 Blackout Edition |
2025–2027 |
| Kawasaki Teryx KRX4 1000 ES |
2023–2024, 2027 |
| Kawasaki Teryx KRX4 1000 ES Special Edition |
2023–2024 |
| Kawasaki Teryx KRX4 1000 SE |
2023–2024 |
| Kawasaki Teryx KRX4 1000 SE ES |
2024 |
| Kawasaki Teryx KRX4 1000 Special Edition |
2023 |
Why Choose a Genuine Kawasaki OEM Shock Absorber Damper?
- Bolts to factory mounting points, with no drilling
- Shields expensive parts from rocks, stumps and debris
- Works with the factory frame and ground clearance
- Costs far less than repairing the parts it protects
- Sold by Witchdoctors, with factory part numbers and parts diagrams for every Kawasaki model we support
Features and Materials
Key Features
- Genuine Kawasaki OEM protection part, part #59201-0004
- Designed around the original frame and suspension geometry
- Corrosion-resistant finish for wet and muddy conditions
- Uses factory hardware locations
- Built for repeated trail and work-site impacts
Materials and Construction
Kawasaki protection parts are typically steel tube, stamped steel, aluminum or high-density plastic, depending on location, finished to resist corrosion from mud, water and road salt.
Common Reasons Owners Replace This Part
- Trail riding over rocks, logs and ruts
- Farm, ranch and job-site work around brush, posts and stumps
- Replacing a bent bumper or cracked skid plate
- Restoring factory protection on a used machine
Signs Your Shock Absorber Damper Needs Replacing
- Bent, cracked or torn bumpers, plates or guards
- Missing or loose mounting hardware
- Deep gouges that weaken the part
- Rust-through on steel parts
- Damage to the components behind the guard
Installation Tips
- Support the machine safely on stands if working underneath.
- Use the Kawasaki parts diagram to identify every bolt and bracket.
- Remove the damaged part and check the frame mounts for cracks or bends.
- Install with fresh hardware where needed and thread locker if the manual calls for it.
- Torque to spec and recheck after your first ride.
Not sure whether to tackle it yourself? Read when to seek professional help or DIY before you start.
Kawasaki Parts Diagrams for Your Machine
Find part #59201-0004 and every part installed with it in the factory Kawasaki parts diagrams for your model:
Related OEM Parts for the Same Machines
Doing the job right? These genuine Kawasaki parts fit the same models and are often replaced at the same time:
Recommended Accessories and Maintenance Supplies
Pair your Shock Absorber Damper with these parts and supplies:
Helpful Guides from the Witchdoctors Blog
Frequently Asked Questions
What is the OEM part number for this Kawasaki Shock Absorber Damper?
The genuine Kawasaki part number is 59201-0004. Use it to match this part to your factory parts diagram.
Which Kawasaki models does part #59201-0004 fit?
It fits 14 Kawasaki Teryx models from 2020 to 2027. The complete list is in the fitment tables above.
Is this a genuine Kawasaki part?
Yes. This is a genuine Kawasaki OEM part, the same part number used at the factory, not an aftermarket copy.
Is this as strong as aftermarket armor?
It is built to Kawasaki's factory standard for the listed models. Aftermarket armor may be heavier, but the OEM part fits the factory mounts exactly and keeps the original weight and clearance.
Can I mount a winch with this part?
Only if the Kawasaki parts diagram shows a winch mount for your model. Otherwise use the dedicated winch mount.
Should I replace the hardware too?
Hardware that has taken a hard hit can stretch or bend. Replace damaged bolts and use fresh thread locker.
Order Your Genuine Kawasaki Shock Absorber Damper Today
Work and ride with confidence on parts built for your machine. Order the genuine Kawasaki Shock Absorber Damper, OEM part #59201-0004, from Witchdoctors today and keep your Teryx KRX or Teryx KRX4 running the way Kawasaki designed it.
Where to Ride Your Kawasaki
Ready to put your machine to work? These off-road parks welcome both ATVs and UTVs. Check each park's current rules, vehicle-width limits and permit requirements before you go.