Genuine Indian Coolant Bypass Inlet — OEM Part #5451967
Keep your liquid-cooled Indian Scout running cool with a genuine Indian Coolant Bypass Inlet. It matches the original fittings, mounts and flow so the cooling system works as designed.
The radiator, fan, water pump, thermostat, hoses and overflow tank keep coolant moving and the engine at a steady temperature. One leak or weak part can lead to overheating and engine damage. This part is confirmed for 9 Indian models from 2015 to 2024.
Coolant Bypass Inlet at a Glance
-
OEM part number: 5451967
-
Brand: Indian (genuine Polaris-made OEM part)
-
Part type: Coolant Hose / Line
-
Indian fitment: Scout, 2015–2024
-
Condition: New
Models and Years This Coolant Bypass Inlet Fits
Genuine part #5451967 fits the models and years below. To be certain, match the part number to the factory parts diagram for your machine or contact us with your VIN before ordering.
Indian Motorcycle Fitment
| Model |
Model Years |
| Indian Scout |
2015–2016, 2023–2024 |
| Indian Scout 1200 |
2017–2022 |
| Indian Scout 1200 Anniversary |
2020 |
| Indian Scout Bobber |
2018–2024 |
| Indian Scout Bobber Sixty |
2020–2024 |
| Indian Scout Bobber Twenty |
2020–2024 |
| Indian Scout Rogue |
2022–2024 |
| Indian Scout Rogue Sixty |
2022–2024 |
| Indian Scout Sixty |
2016–2024 |
Why Choose a Genuine Indian OEM Coolant Bypass Inlet?
- Exact fit with factory hoses, clamps and mounts
- Correct flow and pressure for the liquid-cooled engine
- Materials made for hot coolant and heat cycles
- Protects expensive engine internals from overheating
- Sold by Witchdoctors, an Indian and Victory OEM parts specialist
Features and Materials
Key Features
- Genuine Indian OEM cooling part, part #5451967
- Original fittings, mounting points and dimensions
- Built for continuous heat and pressure cycles
- Designed for the listed Indian models
- Works with factory coolant, sensors and fan controls
Materials and Construction
Indian cooling parts use aluminum radiator cores and housings, reinforced rubber coolant hoses, heat-stabilized plastic tanks and shrouds, and coolant-resistant seals and O-rings.
Common Reasons Riders Replace This Part
- Fixing coolant leaks at hoses, housings or the radiator
- Curing overheating or a fan that will not run
- Replacing a failed water pump or stuck thermostat
- Repairing a radiator or shroud damaged by road debris
Signs Your Coolant Bypass Inlet Needs Replacing
- Temperature warning light or rising gauge
- Coolant puddles or a sweet smell after riding
- Low or bubbling coolant in the overflow tank
- Cracked, swollen or soft hoses
- Bent fins or a blocked radiator
Installation Tips
- Let the engine cool completely before opening the cooling system.
- Drain coolant into a clean pan and dispose of it properly.
- Use the Indian parts diagram for hoses, clamps and O-rings.
- Install the new part with fresh seals and torque fasteners to spec.
- Refill with the coolant in your owner's manual, bleed air, and check for leaks after a test ride.
Not sure whether to tackle it yourself? Read when to seek professional help or DIY before you start.
Parts Diagrams for Your Bike
Find part #5451967 and every part installed with it in the factory parts diagrams for your model:
Related OEM Parts for the Same Bikes
Doing the job right? These genuine parts fit the same models and are often replaced at the same time:
Recommended Accessories and Maintenance Supplies
Pair your Coolant Bypass Inlet with these parts and supplies:
Helpful Guides from the Witchdoctors Blog
Frequently Asked Questions
What is the OEM part number for this Indian Coolant Bypass Inlet?
The genuine part number is 5451967. Use it to match this part to your factory parts diagram.
Which Indian motorcycles does part #5451967 fit?
It fits 9 Indian models (Scout) from 2015 to 2024. See the Indian fitment table above.
Is this a genuine OEM part?
Yes. This is a genuine Polaris-made OEM part, the same part number used at the factory for Indian models, not an aftermarket copy.
What coolant should I use?
Use the coolant type in your owner's manual. Do not mix types, and use a premix or distilled water.
Should I replace hoses and clamps at the same time?
If they are original or show any cracking or softness, yes. It saves draining the system twice.
Why is my bike overheating in traffic?
Check the coolant level, the fan and the thermostat first. A fan that will not switch on is a common cause.
Order Your Genuine Indian Coolant Bypass Inlet Today
Keep your Indian motorcycle on the road. Add the genuine Indian Coolant Bypass Inlet (part #5451967) to your cart today, and order the related parts above at the same time so you can finish the job in one go.
Where to Ride Your Indian
Put fresh parts to work on two of America's great motorcycle roads. Check road conditions, seasonal closures and park rules before you go.
-
Scenic Byway 12 — southern Utah: red-rock canyons and the Hogback ridge
-
Mohawk Trail — Massachusetts: a historic Berkshires route with hairpin views