Indian Foot Peg Mount 5138882-650

Genuine Indian Foot Peg Mount — OEM Part #5138882-650

Keep your Indian Scout solid and straight with a genuine Indian Foot Peg Mount. It is made to Indian's original dimensions, so engine, suspension and bodywork bolt back on in alignment.

Frames, engine cradles, mounts, kickstands and footrest mounts carry the engine and rider loads. A bent or cracked part affects handling and safety. This part is confirmed for 3 Indian models from 2015 to 2020.

Foot Peg Mount at a Glance

• OEM part number: 5138882-650
• Brand: Indian (genuine Polaris-made OEM part)
• Part type: Floorboard & Foot Peg Mounts
• Indian fitment: Scout, 2015–2020
• Condition: New

Models and Years This Foot Peg Mount Fits

Genuine part #5138882-650 fits the models and years below. To be certain, match the part number to the factory parts diagram for your machine or contact us with your VIN before ordering.

Indian Motorcycle Fitment

Why Choose a Genuine Indian OEM Foot Peg Mount?

• Factory geometry and alignment
• Original mounting points for engine and bodywork
• Correct isolators and bushings to control vibration
• Restores safe, stable handling
• Sold by Witchdoctors, an Indian and Victory OEM parts specialist

Features and Materials

Key Features

• Genuine Indian OEM frame or mount part, part #5138882-650
• Original dimensions and hardware locations
• Corrosion-resistant finish
• Designed for the listed Indian models
• Works with factory isolators and fasteners

Materials and Construction

Indian frames and mounts use welded steel or cast aluminum with powder-coat or e-coat finishes, plus rubber isolators where vibration control matters.

Common Reasons Riders Replace This Part

• Repairs after a crash or tip-over
• Replacing a bent kickstand or mount
• Replacing worn engine mounts or isolators
• Restoring a bike with frame damage

Signs Your Foot Peg Mount Needs Replacing

• Bent kickstand or bike leaning too far
• Excess vibration from worn mounts
• Cracks or bends after an impact
• Misaligned bodywork or wheels
• Loose or missing mounting hardware

Installation Tips

1. Support the bike and engine safely before removing mounts.
2. Follow the Indian service manual for torque specs and sequence.
3. Replace isolators and hardware as specified.
4. Check alignment of wheels and bodywork after installation.
5. Recheck torque after the first ride.

Not sure whether to tackle it yourself? Read when to seek professional help or DIY before you start.

Parts Diagrams for Your Bike

Find part #5138882-650 and every part installed with it in the factory parts diagrams for your model:

• 2020 Indian Scout 1200 parts diagrams
• 2019 Indian Scout 1200 parts diagrams
• 2018 Indian Scout 1200 parts diagrams
• 2017 Indian Scout 1200 parts diagrams
• All Indian Motorcycle OEM parts diagrams

Related OEM Parts for the Same Bikes

Doing the job right? These genuine parts fit the same models and are often replaced at the same time:

• Indian Front Frame Titanium Silver (#5139652-650)
• Indian Rear Subframe, Titan. (#5138838-650)
• Indian Foot Peg Mount, Passenger Left Hand Ti Slv (#5139801-650)
• Indian Foot Peg Mount, Passenger Right Hand Ti Slv (#5140827-650)

Recommended Accessories and Maintenance Supplies

Pair your Foot Peg Mount with these parts and supplies:

• Lowering links and kickstands — Kickstands and links
• Highway and crash bars — Crash protection
• Motorcycle hardware — Fasteners and hardware
• Garage tools — Tools for the job
• Indian Scout parts — more parts for your Scout

Helpful Guides from the Witchdoctors Blog

• Spring Tune-Up for Your Victory or Indian Motorcycle: Get Ready to Ride
• Victory & Indian Motorcycle Spring Inspection Checklist

Frequently Asked Questions

What is the OEM part number for this Indian Foot Peg Mount?

The genuine part number is 5138882-650. Use it to match this part to your factory parts diagram.

Which Indian motorcycles does part #5138882-650 fit?

It fits the Indian Scout (2015–2016); Indian Scout 1200 (2017–2020); Indian Scout 1200 Anniversary (2020).

Is this a genuine OEM part?

Yes. This is a genuine Polaris-made OEM part, the same part number used at the factory for Indian models, not an aftermarket copy.

Is my kickstand bent?

If the bike leans much farther than usual, it may be. Our blog has a diagnostic guide.

Can a bent frame be straightened?

Frame repair needs a specialist and a frame jig. Replacing damaged parts is safer.

Do I need new hardware?

Replace any fastener that was stretched, corroded or specified as one-time-use.

Order Your Genuine Indian Foot Peg Mount Today

Keep your Indian motorcycle on the road. Add the genuine Indian Foot Peg Mount (part #5138882-650) to your cart today, and order the related parts above at the same time so you can finish the job in one go.

• How long will it take to receive my order?
• Shipping and return policy
• Questions about fitment? Contact us
• Shop all Indian OEM parts

Where to Ride Your Indian

Put fresh parts to work on two of America's great motorcycle roads. Check road conditions, seasonal closures and park rules before you go.

• Mohawk Trail — Massachusetts: a historic Berkshires route with hairpin views
• Kancamagus Highway — White Mountains, New Hampshire: 34 miles through the White Mountain National Forest