Genuine Polaris Tilt Steering Shock Cylinder — OEM Part #7044098
Loose, heavy or wandering steering makes every ride tiring and less safe. The genuine Polaris Tilt Steering Shock Cylinder restores precise, factory-feel steering on your Polaris ATV or side-by-side, fitting the original column, rack and linkage.
The steering wheel or handlebar, column, rack, tie rods and power steering unit all affect control. Play or binding in any one part shows up as vague or heavy steering. This part is confirmed for 335 Polaris models from 2014 to 2026. See the full fitment list below.
Tilt Steering Shock Cylinder at a Glance
-
OEM part number: 7044098
-
Brand: Polaris (genuine factory part)
-
Part type: Steering Wheel Shocks & Springs
-
Fits: General crossover side-by-side, RZR sport side-by-side and Ranger utility side-by-side models, 2014–2026
-
Condition: New
Polaris Models and Years This Tilt Steering Shock Cylinder Fits
Genuine Polaris part #7044098 fits the models and years below. To be certain, match the part number to the factory parts diagram for your machine or contact us with your VIN before ordering.
This part is shared across 335 Polaris model variants, so the table below groups them by model family. Your exact trim is listed in the parts diagrams linked further down.
Polaris General crossover side-by-side Fitment
| Model Family |
Model Years |
Trims |
| Polaris General 1000 |
2016–2026 |
22 |
| Polaris General XP |
2020–2026 |
27 |
Polaris RZR sport side-by-side Fitment
| Model Family |
Model Years |
Trims |
| Polaris RZR |
2025 |
1 |
| Polaris RZR 64 |
2021 |
1 |
| Polaris RZR 900 |
2018–2026 |
9 |
| Polaris RZR 1000 |
2018–2021 |
3 |
| Polaris RZR PRO |
2020–2026 |
23 |
| Polaris RZR RS1 |
2019–2022 |
3 |
| Polaris RZR S |
2020 |
1 |
| Polaris RZR S4 |
2020 |
1 |
| Polaris RZR Trail |
2020–2026 |
7 |
| Polaris RZR Trctr |
2025 |
1 |
| Polaris RZR Turbo |
2019–2024 |
10 |
| Polaris RZR XP |
2018–2026 |
29 |
| Polaris RZR Xp4 |
2019 |
2 |
Polaris Ranger utility side-by-side Fitment
| Model Family |
Model Years |
Trims |
| Polaris Ranger |
2015, 2019–2020, 2023 |
3 |
| Polaris Ranger 6P |
2017 |
1 |
| Polaris Ranger 48V |
2020–2022 |
2 |
| Polaris Ranger 500 |
2017–2022, 2026 |
7 |
| Polaris Ranger 530 |
2023–2025 |
1 |
| Polaris Ranger 570 |
2015–2026 |
33 |
| Polaris Ranger 900 |
2015–2019 |
5 |
| Polaris Ranger 902D |
2020–2021 |
3 |
| Polaris Ranger 1000 |
2015–2026 |
52 |
| Polaris Ranger Back |
2020 |
2 |
| Polaris Ranger Diesel |
2014 |
2 |
| Polaris Ranger ETX |
2015–2016 |
1 |
| Polaris Ranger EV |
2015–2024 |
8 |
| Polaris Ranger FC |
2020 |
2 |
| Polaris Ranger HD |
2020 |
1 |
| Polaris Ranger High |
2019–2020 |
2 |
| Polaris Ranger Hst |
2015–2017 |
1 |
| Polaris Ranger Is |
2020 |
1 |
| Polaris Ranger MD |
2018, 2024–2025 |
2 |
| Polaris Ranger Northstar |
2018–2020 |
12 |
| Polaris Ranger RC |
2020 |
2 |
| Polaris Ranger Texas |
2020 |
1 |
| Polaris Ranger Tx |
2020 |
1 |
| Polaris Ranger Winter |
2020 |
2 |
| Polaris Ranger XP |
2014, 2017–2019, 2021–2026 |
48 |
Why Choose a Genuine Polaris OEM Tilt Steering Shock Cylinder?
- Factory fit with the rack, column and linkage
- Restores tight, precise steering
- Works with Polaris EPS where equipped
- Helps keep alignment and tire wear in check
- Sold by Witchdoctors, with factory part numbers and parts diagrams for every Polaris model we support
Features and Materials
Key Features
- Genuine Polaris OEM steering part, part #7044098
- Original splines, threads and joints
- Corrosion- and impact-resistant construction
- Designed for the listed Polaris models
- Works with factory power steering units, sensors and wiring where applicable
Materials and Construction
Polaris steering parts use hardened steel shafts, racks and tie-rod ends with sealed joints, aluminum or steel housings, and sealed power steering motors and modules built for water and vibration.
Common Reasons Riders Replace This Part
- Fixing play, clunks or wandering
- Replacing bent tie rods or shafts after an impact
- Repairing power steering faults or heavy steering
- Restoring steering on a high-hour machine
Signs Your Tilt Steering Shock Cylinder Needs Replacing
- Free play in the steering
- Clunking when turning
- Heavy steering or a power steering warning
- Bent tie rods or an off-center wheel
- Torn boots on tie-rod ends or the rack
Installation Tips
- Point the wheels straight before disconnecting parts.
- Use the Polaris parts diagram for hardware, cotter pins and power steering connectors.
- Disconnect the battery before working on power steering parts.
- Match the original spline position or tie-rod length.
- Torque to spec, set toe and check lock-to-lock travel.
Not sure whether to tackle it yourself? Read when to seek professional help or DIY before you start.
Polaris Parts Diagrams for Your Machine
Find part #7044098 and every part installed with it in the factory Polaris parts diagrams for your model:
Related OEM Parts for the Same Machines
Doing the job right? These genuine Polaris parts fit the same models and are often replaced at the same time:
Recommended Accessories and Maintenance Supplies
Pair your Tilt Steering Shock Cylinder with these parts and supplies:
Helpful Guides from the Witchdoctors Blog
Frequently Asked Questions
What is the OEM part number for this Polaris Tilt Steering Shock Cylinder?
The genuine Polaris part number is 7044098. Use it to match this part to your factory parts diagram.
Which Polaris models does part #7044098 fit?
It fits 335 Polaris General, RZR and Ranger models from 2014 to 2026. The complete list is in the fitment tables above.
Is this a genuine Polaris part?
Yes. This is a genuine Polaris OEM part, the same part number used at the factory, not an aftermarket copy.
Do I need an alignment after steering work?
Yes. Set toe to prevent wander and tire wear.
Does power steering need a reset after service?
Some systems need a reset or calibration. Check your service manual or ask a dealer.
Can a bent steering part be straightened?
No. Always replace bent steering parts.
Order Your Genuine Polaris Tilt Steering Shock Cylinder Today
Get your Polaris ATV or side-by-side back to factory condition. Add the genuine Polaris Tilt Steering Shock Cylinder (part #7044098) to your cart today, and order the related parts above at the same time so you can finish the job in one go.
Where to Ride Your Polaris
Ready to put your machine to work? These off-road parks welcome both ATVs and UTVs. Check each park's current rules, vehicle-width limits and permit requirements before you go.